From: "Thomas Weißschuh" <linux@weissschuh.net>
To: Mario Limonciello <mario.limonciello@amd.com>
Cc: "Alex Deucher" <alexander.deucher@amd.com>,
"Christian König" <christian.koenig@amd.com>,
"David Airlie" <airlied@gmail.com>,
"Daniel Vetter" <daniel@ffwll.ch>,
"Maarten Lankhorst" <maarten.lankhorst@linux.intel.com>,
"Maxime Ripard" <mripard@kernel.org>,
"Thomas Zimmermann" <tzimmermann@suse.de>,
"Harry Wentland" <harry.wentland@amd.com>,
"Leo Li" <sunpeng.li@amd.com>,
"Rodrigo Siqueira" <Rodrigo.Siqueira@amd.com>,
"Matt Hartley" <matt.hartley@gmail.com>,
"Kieran Levin" <ktl@framework.net>,
"Hans de Goede" <hdegoede@redhat.com>,
"Jani Nikula" <jani.nikula@linux.intel.com>,
"Xinhui Pan" <Xinhui.Pan@amd.com>,
"Jonathan Corbet" <corbet@lwn.net>,
amd-gfx@lists.freedesktop.org, dri-devel@lists.freedesktop.org,
linux-kernel@vger.kernel.org, "Dustin Howett" <dustin@howett.net>,
linux-doc@vger.kernel.org
Subject: Re: [PATCH v5 1/4] drm: Add panel backlight quirks
Date: Thu, 22 Aug 2024 08:12:01 +0200 [thread overview]
Message-ID: <f3dac7f6-22ee-483e-b2f3-3a1c900c3f06@t-8ch.de> (raw)
In-Reply-To: <5363536d-0f96-4e96-8f1f-c8e1799b6421@amd.com>
On 2024-08-21 15:51:17+0000, Mario Limonciello wrote:
> On 8/18/2024 01:56, Thomas Weißschuh wrote:
> > Panels using a PWM-controlled backlight source do not have a standard
> > way to communicate their valid PWM ranges.
> > On x86 the ranges are read from ACPI through driver-specific tables.
> > The built-in ranges are not necessarily correct, or may grow stale if an
> > older device can be retrofitted with newer panels.
> >
> > Add a quirk infrastructure with which the minimum valid backlight value
> > can be maintained as part of the kernel.
> >
> > Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
> > Tested-by: Dustin L. Howett <dustin@howett.net>
>
> One small nit below but otherwise this patch is fine to me.
>
> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
>
> > ---
> > Documentation/gpu/drm-kms-helpers.rst | 3 ++
> > drivers/gpu/drm/Kconfig | 4 ++
> > drivers/gpu/drm/Makefile | 1 +
> > drivers/gpu/drm/drm_panel_backlight_quirks.c | 70 ++++++++++++++++++++++++++++
> > include/drm/drm_utils.h | 4 ++
> > 5 files changed, 82 insertions(+)
> >
> > diff --git a/Documentation/gpu/drm-kms-helpers.rst b/Documentation/gpu/drm-kms-helpers.rst
> > index 8435e8621cc0..a26989500129 100644
> > --- a/Documentation/gpu/drm-kms-helpers.rst
> > +++ b/Documentation/gpu/drm-kms-helpers.rst
> > @@ -230,6 +230,9 @@ Panel Helper Reference
> > .. kernel-doc:: drivers/gpu/drm/drm_panel_orientation_quirks.c
> > :export:
> > +.. kernel-doc:: drivers/gpu/drm/drm_panel_backlight_quirks.c
> > + :export:
> > +
> > Panel Self Refresh Helper Reference
> > ===================================
> > diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig
> > index 6b2c6b91f962..9ebb8cdb535e 100644
> > --- a/drivers/gpu/drm/Kconfig
> > +++ b/drivers/gpu/drm/Kconfig
> > @@ -454,6 +454,10 @@ config DRM_HYPERV
> > config DRM_EXPORT_FOR_TESTS
> > bool
> > +# Separate option as not all DRM drivers use it
> > +config DRM_PANEL_BACKLIGHT_QUIRKS
> > + tristate
> > +
> > config DRM_LIB_RANDOM
> > bool
> > default n
> > diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile
> > index 68cc9258ffc4..adf85999aee2 100644
> > --- a/drivers/gpu/drm/Makefile
> > +++ b/drivers/gpu/drm/Makefile
> > @@ -92,6 +92,7 @@ drm-$(CONFIG_DRM_PANIC) += drm_panic.o
> > obj-$(CONFIG_DRM) += drm.o
> > obj-$(CONFIG_DRM_PANEL_ORIENTATION_QUIRKS) += drm_panel_orientation_quirks.o
> > +obj-$(CONFIG_DRM_PANEL_BACKLIGHT_QUIRKS) += drm_panel_backlight_quirks.o
> > #
> > # Memory-management helpers
> > diff --git a/drivers/gpu/drm/drm_panel_backlight_quirks.c b/drivers/gpu/drm/drm_panel_backlight_quirks.c
> > new file mode 100644
> > index 000000000000..6b8bbed77c7f
> > --- /dev/null
> > +++ b/drivers/gpu/drm/drm_panel_backlight_quirks.c
> > @@ -0,0 +1,70 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +
> > +#include <linux/array_size.h>
> > +#include <linux/dmi.h>
> > +#include <linux/mod_devicetable.h>
> > +#include <linux/module.h>
> > +#include <drm/drm_edid.h>
> > +#include <drm/drm_utils.h>
> > +
> > +struct drm_panel_min_backlight_quirk {
> > + struct {
> > + enum dmi_field field;
> > + const char * const value;
> > + } dmi_match;
> > + struct drm_edid_ident ident;
> > + u8 min_brightness;
> > +};
> > +
> > +static const struct drm_panel_min_backlight_quirk drm_panel_min_backlight_quirks[] = {
> > +};
> > +
> > +static bool drm_panel_min_backlight_quirk_matches(const struct drm_panel_min_backlight_quirk *quirk,
> > + const struct drm_edid *edid)
> > +{
> > + if (!dmi_match(quirk->dmi_match.field, quirk->dmi_match.value))
> > + return false;
> > +
> > + if (!drm_edid_match(edid, &quirk->ident))
> > + return false;
> > +
> > + return true;
> > +}
> > +
> > +/**
> > + * drm_get_panel_min_brightness_quirk - Get minimum supported brightness level for a panel.
> > + * @edid: EDID of the panel to check
> > + *
> > + * This function checks for platform specific (e.g. DMI based) quirks
> > + * providing info on the minimum backlight brightness for systems where this
> > + * cannot be probed correctly from the hard-/firm-ware.
> > + *
> > + * Returns:
> > + * A negative error value or
> > + * an override value in the range [0, 255] representing 0-100% to be scaled to
> > + * the drivers target range.
> > + */
> > +int drm_get_panel_min_brightness_quirk(const struct drm_edid *edid)
> > +{
> > + const struct drm_panel_min_backlight_quirk *quirk;
> > + size_t i;
>
> Nit: this doesn't really seem like it needs to be size_t. Shouldn't it just
> be an unsigned int?
ARRAY_SIZE() works with sizeof() which returns size_t.
It doesn't really matter, but I slightly prefer to keep the size_t.
> > +
> > + if (!IS_ENABLED(CONFIG_DMI))
> > + return -ENODATA;
> > +
> > + if (!edid)
> > + return -EINVAL;
> > +
> > + for (i = 0; i < ARRAY_SIZE(drm_panel_min_backlight_quirks); i++) {
> > + quirk = &drm_panel_min_backlight_quirks[i];
> > +
> > + if (drm_panel_min_backlight_quirk_matches(quirk, edid))
> > + return quirk->min_brightness;
> > + }
> > +
> > + return -ENODATA;
> > +}
> > +EXPORT_SYMBOL(drm_get_panel_min_brightness_quirk);
> > +
> > +MODULE_DESCRIPTION("Quirks for panel backlight overrides");
> > +MODULE_LICENSE("GPL");
> > diff --git a/include/drm/drm_utils.h b/include/drm/drm_utils.h
> > index 70775748d243..15fa9b6865f4 100644
> > --- a/include/drm/drm_utils.h
> > +++ b/include/drm/drm_utils.h
> > @@ -12,8 +12,12 @@
> > #include <linux/types.h>
> > +struct drm_edid;
> > +
> > int drm_get_panel_orientation_quirk(int width, int height);
> > +int drm_get_panel_min_brightness_quirk(const struct drm_edid *edid);
> > +
> > signed long drm_timeout_abs_to_jiffies(int64_t timeout_nsec);
> > #endif
> >
>
next prev parent reply other threads:[~2024-08-22 6:12 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-08-18 6:56 [PATCH v5 0/4] drm: Minimum backlight overrides and implementation for amdgpu Thomas Weißschuh
2024-08-18 6:56 ` [PATCH v5 1/4] drm: Add panel backlight quirks Thomas Weißschuh
2024-08-21 20:51 ` Mario Limonciello
2024-08-22 6:12 ` Thomas Weißschuh [this message]
2024-08-22 13:34 ` Mario Limonciello
2024-08-18 6:56 ` [PATCH v5 2/4] drm/amd/display: Add support for minimum backlight quirk Thomas Weißschuh
2024-08-21 20:54 ` Mario Limonciello
2024-08-22 6:14 ` Thomas Weißschuh
2024-08-22 13:34 ` Mario Limonciello
2024-08-18 6:56 ` [PATCH v5 3/4] drm: panel-backlight-quirks: Add Framework 13 matte panel Thomas Weißschuh
2024-08-21 20:54 ` Mario Limonciello
2024-08-18 6:56 ` [PATCH v5 4/4] drm: panel-backlight-quirks: Add Framework 13 glossy and 2.8k panels Thomas Weißschuh
2024-08-21 20:55 ` Mario Limonciello
2024-08-21 20:45 ` [PATCH v5 0/4] drm: Minimum backlight overrides and implementation for amdgpu Mario Limonciello
2024-08-22 6:09 ` Thomas Weißschuh
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=f3dac7f6-22ee-483e-b2f3-3a1c900c3f06@t-8ch.de \
--to=linux@weissschuh.net \
--cc=Rodrigo.Siqueira@amd.com \
--cc=Xinhui.Pan@amd.com \
--cc=airlied@gmail.com \
--cc=alexander.deucher@amd.com \
--cc=amd-gfx@lists.freedesktop.org \
--cc=christian.koenig@amd.com \
--cc=corbet@lwn.net \
--cc=daniel@ffwll.ch \
--cc=dri-devel@lists.freedesktop.org \
--cc=dustin@howett.net \
--cc=harry.wentland@amd.com \
--cc=hdegoede@redhat.com \
--cc=jani.nikula@linux.intel.com \
--cc=ktl@framework.net \
--cc=linux-doc@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=maarten.lankhorst@linux.intel.com \
--cc=mario.limonciello@amd.com \
--cc=matt.hartley@gmail.com \
--cc=mripard@kernel.org \
--cc=sunpeng.li@amd.com \
--cc=tzimmermann@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®