Re: [PATCH 1/3] net: mana: Add speed support in mana_get_link_ksettings

[Andrew Lunn <andrew@lunn.ch>]

> +int mana_query_link_cfg(struct mana_port_context *apc)
> +{
> +	struct net_device *ndev = apc->ndev;
> +	struct mana_query_link_config_req req = {};
> +	struct mana_query_link_config_resp resp = {};
> +	int err;
> +
> +	mana_gd_init_req_hdr(&req.hdr, MANA_QUERY_LINK_CONFIG,
> +			     sizeof(req), sizeof(resp));
> +
> +	req.vport = apc->port_handle;
> +
> +	err = mana_send_request(apc->ac, &req, sizeof(req), &resp,
> +				sizeof(resp));
> +
> +	if (err) {
> +		netdev_err(ndev, "Failed to query link config: %d\n", err);
> +		goto out;
> +	}
> +
> +	err = mana_verify_resp_hdr(&resp.hdr, MANA_QUERY_LINK_CONFIG,
> +				   sizeof(resp));
> +
> +	if (err || resp.hdr.status) {
> +		netdev_err(ndev, "Failed to query link config: %d, 0x%x\n", err,
> +			   resp.hdr.status);
> +		if (!err)
> +			err = -EPROTO;
> +		goto out;
> +	}
> +
> +	if (resp.qos_unconfigured) {
> +		err = -EINVAL;
> +		goto out;
> +	}
> +	apc->speed = resp.link_speed;

Might be worth adding a comment that the firmware is returning speed
in Mbps.

Or name the struct member link_speed_mbps.

	Andrew