From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
To: Vinod Koul <vkoul@kernel.org>, Rob Clark <robdclark@gmail.com>
Cc: linux-arm-msm@vger.kernel.org,
Bjorn Andersson <bjorn.andersson@linaro.org>,
David Airlie <airlied@linux.ie>, Daniel Vetter <daniel@ffwll.ch>,
Jonathan Marek <jonathan@marek.ca>,
Abhinav Kumar <abhinavk@codeaurora.org>,
Jeffrey Hugo <jeffrey.l.hugo@gmail.com>,
Sumit Semwal <sumit.semwal@linaro.org>,
linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org,
freedreno@lists.freedesktop.org
Subject: Re: [PATCH v2 07/11] drm/msm/disp/dpu1: Add DSC support in hw_ctl
Date: Thu, 14 Oct 2021 17:06:53 +0300 [thread overview]
Message-ID: <f5f6162c-7ed0-2964-7cf9-0bb894c8b4f5@linaro.org> (raw)
In-Reply-To: <20211007070900.456044-8-vkoul@kernel.org>
On 07/10/2021 10:08, Vinod Koul wrote:
> Later gens of hardware have DSC bits moved to hw_ctl, so configure these
> bits so that DSC would work there as well
>
> Signed-off-by: Vinod Koul <vkoul@kernel.org>
> ---
> Changes since
> v1:
> - Move this patch from 6 to 7 due to dependency on 6th one
> - Use DSC indices for programming DSC registers and program only on non
> null indices
>
> drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c | 12 ++++++++++--
> 1 file changed, 10 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c
> index 3c79bd9c2fe5..8ea9d8dce3f7 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c
> @@ -25,6 +25,8 @@
> #define CTL_MERGE_3D_ACTIVE 0x0E4
> #define CTL_INTF_ACTIVE 0x0F4
> #define CTL_MERGE_3D_FLUSH 0x100
> +#define CTL_DSC_ACTIVE 0x0E8
> +#define CTL_DSC_FLUSH 0x104
> #define CTL_INTF_FLUSH 0x110
> #define CTL_INTF_MASTER 0x134
> #define CTL_FETCH_PIPE_ACTIVE 0x0FC
> @@ -34,6 +36,7 @@
>
> #define DPU_REG_RESET_TIMEOUT_US 2000
> #define MERGE_3D_IDX 23
> +#define DSC_IDX 22
> #define INTF_IDX 31
> #define CTL_INVALID_BIT 0xffff
>
> @@ -120,7 +123,6 @@ static u32 dpu_hw_ctl_get_pending_flush(struct dpu_hw_ctl *ctx)
>
> static void dpu_hw_ctl_trigger_flush_v1(struct dpu_hw_ctl *ctx)
> {
> -
> if (ctx->pending_flush_mask & BIT(MERGE_3D_IDX))
> DPU_REG_WRITE(&ctx->hw, CTL_MERGE_3D_FLUSH,
> ctx->pending_merge_3d_flush_mask);
> @@ -128,7 +130,6 @@ static void dpu_hw_ctl_trigger_flush_v1(struct dpu_hw_ctl *ctx)
> DPU_REG_WRITE(&ctx->hw, CTL_INTF_FLUSH,
> ctx->pending_intf_flush_mask);
>
> - DPU_REG_WRITE(&ctx->hw, CTL_FLUSH, ctx->pending_flush_mask);
This would break non-DSC case.
> }
>
> static inline void dpu_hw_ctl_trigger_flush(struct dpu_hw_ctl *ctx)
> @@ -498,6 +499,9 @@ static void dpu_hw_ctl_intf_cfg_v1(struct dpu_hw_ctl *ctx,
> u32 intf_active = 0;
> u32 mode_sel = 0;
>
> + if (cfg->dsc)
> + DPU_REG_WRITE(&ctx->hw, CTL_DSC_FLUSH, cfg->dsc);
> +
> if (cfg->intf_mode_sel == DPU_CTL_MODE_SEL_CMD)
> mode_sel |= BIT(17);
>
> @@ -509,6 +513,10 @@ static void dpu_hw_ctl_intf_cfg_v1(struct dpu_hw_ctl *ctx,
> if (cfg->merge_3d)
> DPU_REG_WRITE(c, CTL_MERGE_3D_ACTIVE,
> BIT(cfg->merge_3d - MERGE_3D_0));
> + if (cfg->dsc) {
> + DPU_REG_WRITE(&ctx->hw, CTL_FLUSH, ctx->pending_flush_mask | BIT(DSC_IDX));
Why?
> + DPU_REG_WRITE(c, CTL_DSC_ACTIVE, cfg->dsc);
> + }
> }
>
> static void dpu_hw_ctl_intf_cfg(struct dpu_hw_ctl *ctx,
>
--
With best wishes
Dmitry
next prev parent reply other threads:[~2021-10-14 14:07 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-10-07 7:08 [PATCH v2 00/11] drm/msm: Add Display Stream Compression Support Vinod Koul
2021-10-07 7:08 ` [PATCH v2 01/11] drm/msm/dsi: add support for dsc data Vinod Koul
2021-10-25 14:43 ` Dmitry Baryshkov
2021-10-07 7:08 ` [PATCH v2 02/11] drm/msm/disp/dpu1: Add support for DSC Vinod Koul
2021-10-14 14:40 ` Dmitry Baryshkov
2021-10-19 14:07 ` Vinod Koul
2021-10-07 7:08 ` [PATCH v2 03/11] drm/msm/disp/dpu1: Add support for DSC in pingpong block Vinod Koul
2021-10-14 13:30 ` Dmitry Baryshkov
2021-10-07 7:08 ` [PATCH v2 04/11] drm/msm/disp/dpu1: Add DSC support in RM Vinod Koul
2021-10-14 14:11 ` Dmitry Baryshkov
2021-10-19 15:30 ` Vinod Koul
2021-10-19 15:52 ` Dmitry Baryshkov
2021-10-19 16:25 ` Vinod Koul
2021-10-07 7:08 ` [PATCH v2 05/11] drm/msm/disp/dpu1: Add DSC for SDM845 to hw_catalog Vinod Koul
2021-10-14 13:33 ` Dmitry Baryshkov
2021-10-07 7:08 ` [PATCH v2 06/11] drm/msm/disp/dpu1: Don't use DSC with mode_3d Vinod Koul
2021-10-14 13:41 ` Dmitry Baryshkov
2021-10-14 13:50 ` Dmitry Baryshkov
2021-10-20 6:57 ` Vinod Koul
2021-10-25 14:40 ` Dmitry Baryshkov
2021-10-25 16:10 ` Vinod Koul
2021-10-25 18:33 ` Dmitry Baryshkov
2021-10-07 7:08 ` [PATCH v2 07/11] drm/msm/disp/dpu1: Add DSC support in hw_ctl Vinod Koul
2021-10-14 14:06 ` Dmitry Baryshkov [this message]
2021-10-20 9:19 ` Vinod Koul
2021-10-07 7:08 ` [PATCH v2 08/11] drm/msm/disp/dpu1: Add support for DSC in encoder Vinod Koul
2021-10-25 14:44 ` Dmitry Baryshkov
2021-10-07 7:08 ` [PATCH v2 09/11] drm/msm/disp/dpu1: Add support for DSC in topology Vinod Koul
2021-10-14 14:13 ` Dmitry Baryshkov
2021-10-25 14:37 ` Dmitry Baryshkov
2021-10-25 16:11 ` Vinod Koul
2021-10-07 7:08 ` [PATCH v2 10/11] drm/msm/dsi: Add support for DSC configuration Vinod Koul
2021-10-14 23:18 ` Dmitry Baryshkov
2021-10-20 11:53 ` Vinod Koul
2021-10-07 7:09 ` [PATCH v2 11/11] drm/msm/dsi: Pass DSC params to drm_panel Vinod Koul
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=f5f6162c-7ed0-2964-7cf9-0bb894c8b4f5@linaro.org \
--to=dmitry.baryshkov@linaro.org \
--cc=abhinavk@codeaurora.org \
--cc=airlied@linux.ie \
--cc=bjorn.andersson@linaro.org \
--cc=daniel@ffwll.ch \
--cc=dri-devel@lists.freedesktop.org \
--cc=freedreno@lists.freedesktop.org \
--cc=jeffrey.l.hugo@gmail.com \
--cc=jonathan@marek.ca \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robdclark@gmail.com \
--cc=sumit.semwal@linaro.org \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®