From: Nicolai Buchwitz <nb@tipi-net.de>
To: Birger Koblitz <mail@birger-koblitz.de>
Cc: Andrew Lunn <andrew+netdev@lunn.ch>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Russell King <linux@armlinux.org.uk>,
Andrew Lunn <andrew@lunn.ch>,
Heiner Kallweit <hkallweit1@gmail.com>,
linux-usb@vger.kernel.org, netdev@vger.kernel.org,
linux-kernel@vger.kernel.org, Jianhui Xu <neuromoments@gmail.com>
Subject: Re: [PATCH net-next v11 02/15] phylib: Add support for PHYs with broken forced mode
Date: Mon, 14 Sep 2026 16:14:20 +0200 [thread overview]
Message-ID: <f64d21ee4706d57e80ac7a950c26878a@tipi-net.de> (raw)
In-Reply-To: <20260914-ax88179a-v11-2-5ea7a925ba6d@birger-koblitz.de>
On 14.9.2026 14:46, Birger Koblitz wrote:
> Add support for PHYs which only supported auto-negotiated
> speed modes. This prevents a kernel warning and stack-trace within the
> phy_state_machine when PHYs return -EOPNOTSUPP from config_aneg()
> because they do not support forced modes.
>
> Signed-off-by: Birger Koblitz <mail@birger-koblitz.de>
> Reviewed-by: Andrew Lunn <andrew@lunn.ch>
> ---
> drivers/net/phy/phy.c | 4 ++++
> include/linux/phy.h | 1 +
> 2 files changed, 5 insertions(+)
>
> diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
> index
> fce9bc7be3304b408c9f3ec9b5b95c76d3680a88..b83f938fe7c3bd619ae453434fd9582c0a055a57
> 100644
> --- a/drivers/net/phy/phy.c
> +++ b/drivers/net/phy/phy.c
> @@ -1190,6 +1190,10 @@ int phy_ethtool_ksettings_set(struct phy_device
> *phydev,
> duplex != DUPLEX_FULL)))
> return -EINVAL;
>
> + if (autoneg == AUTONEG_DISABLE &&
> + (phydev->drv->flags & PHY_BROKEN_FORCED))
> + return -EOPNOTSUPP;
> +
> mutex_lock(&phydev->lock);
> phydev->autoneg = autoneg;
>
> diff --git a/include/linux/phy.h b/include/linux/phy.h
> index
> 5f8d65868e0ff558c163421cfea5a6f3bd73a53e..d5f8e527ce8dfefd40a8b34e7c2f9adbcd6c87c1
> 100644
> --- a/include/linux/phy.h
> +++ b/include/linux/phy.h
> @@ -64,6 +64,7 @@ extern const int phy_basic_ports_array[3];
> #define PHY_RST_AFTER_CLK_EN 0x00000002
> #define PHY_POLL_CABLE_TEST 0x00000004
> #define PHY_ALWAYS_CALL_SUSPEND 0x00000008
> +#define PHY_BROKEN_FORCED 0x00000010
> #define MDIO_DEVICE_IS_PHY 0x80000000
>
> /**
Reviewed-by: Nicolai Buchwitz <nb@tipi-net.de>
Thanks,
Nicolai
next prev parent reply other threads:[~2026-09-14 14:14 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-14 12:46 [PATCH net-next v11 00/15] ax88179_178a: Add support for AX88179A-based chips Birger Koblitz
2026-09-14 12:46 ` [PATCH net-next v11 01/15] phylink: Add phylink_mac_interrupt Birger Koblitz
2026-09-14 14:13 ` Nicolai Buchwitz
2026-09-16 6:47 ` netdev-bot+sashiko
2026-09-14 12:46 ` [PATCH net-next v11 02/15] phylib: Add support for PHYs with broken forced mode Birger Koblitz
2026-09-14 14:14 ` Nicolai Buchwitz [this message]
2026-09-16 6:47 ` netdev-bot+sashiko
2026-09-14 12:46 ` [PATCH net-next v11 03/15] ax88179_178a: Fix endianness of pause watermark register Birger Koblitz
2026-09-14 12:46 ` [PATCH net-next v11 04/15] ax88179_178a: Split driver into library and device specific code Birger Koblitz
2026-09-14 14:15 ` Nicolai Buchwitz
2026-09-16 6:47 ` netdev-bot+sashiko
2026-09-14 12:46 ` [PATCH net-next v11 05/15] ax88179_178a: Add netdev2data() convenience function Birger Koblitz
2026-09-16 6:47 ` netdev-bot+sashiko
2026-09-14 12:46 ` [PATCH net-next v11 06/15] ax88179_178a: Add HW support for AX179A-based chips Birger Koblitz
2026-09-14 14:12 ` Nicolai Buchwitz
2026-09-14 16:53 ` Andrew Lunn
2026-09-15 0:01 ` Birger Koblitz
2026-09-15 12:07 ` Andrew Lunn
2026-09-16 0:12 ` Birger Koblitz
2026-09-15 5:28 ` Birger Koblitz
2026-09-16 6:47 ` netdev-bot+sashiko
2026-09-14 12:46 ` [PATCH net-next v11 07/15] ax88179_178a: Add EEE configuration support for AX88179A MACs Birger Koblitz
2026-09-16 6:47 ` netdev-bot+sashiko
2026-09-14 12:46 ` [PATCH net-next v11 08/15] ax88179_178a: Add EEE configuration support for AX88179A PHYs Birger Koblitz
2026-09-14 14:17 ` Nicolai Buchwitz
2026-09-16 6:47 ` netdev-bot+sashiko
2026-09-14 12:46 ` [PATCH net-next v11 09/15] ax88179_178a: Add VLAN offload support for AX88179A Birger Koblitz
2026-09-16 6:47 ` netdev-bot+sashiko
2026-09-14 12:46 ` [PATCH net-next v11 10/15] ax88179_178a: Add AX179A/AX279 multicast configuration Birger Koblitz
2026-09-16 6:47 ` netdev-bot+sashiko
2026-09-14 12:46 ` [PATCH net-next v11 11/15] ax88179_178a: Add Suspend/resume support for AX88179A/772D/279 Birger Koblitz
2026-09-16 6:47 ` netdev-bot+sashiko
2026-09-14 12:46 ` [PATCH net-next v11 12/15] ax88179_178a: Add ethtool get_drvinfo Birger Koblitz
2026-09-14 14:16 ` Nicolai Buchwitz
2026-09-16 6:47 ` netdev-bot+sashiko
2026-09-14 12:46 ` [PATCH net-next v11 13/15] ax88179_178a: Update driver name and information Birger Koblitz
2026-09-14 14:17 ` Nicolai Buchwitz
2026-09-16 6:47 ` netdev-bot+sashiko
2026-09-14 12:46 ` [PATCH net-next v11 14/15] ax88179_178a: Add support for AX88179A/772D/279 EEPROM access Birger Koblitz
2026-09-16 6:47 ` netdev-bot+sashiko
2026-09-14 12:46 ` [PATCH net-next v11 15/15] ax88796b: Add support for AX88772D, AX88179A and AX88279 Birger Koblitz
2026-09-16 6:47 ` netdev-bot+sashiko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=f64d21ee4706d57e80ac7a950c26878a@tipi-net.de \
--to=nb@tipi-net.de \
--cc=andrew+netdev@lunn.ch \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=hkallweit1@gmail.com \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=mail@birger-koblitz.de \
--cc=netdev@vger.kernel.org \
--cc=neuromoments@gmail.com \
--cc=pabeni@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®