[PATCH] clk: rs9: Use i2c_get_match_data() instead of device_get_match_data()

[PATCH] clk: rs9: Use i2c_get_match_data() instead of device_get_match_data()

[Biju Das]

The device_get_match_data(), is to get match data for firmware interfaces
such as just OF/ACPI. This driver has I2C matching table as well. Use
i2c_get_match_data() to get match data for I2C, ACPI and DT-based
matching.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
---
 drivers/clk/clk-renesas-pcie.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/clk/clk-renesas-pcie.c b/drivers/clk/clk-renesas-pcie.c
index 7d7b2cb75318..380245f635d6 100644
--- a/drivers/clk/clk-renesas-pcie.c
+++ b/drivers/clk/clk-renesas-pcie.c
@@ -298,7 +298,7 @@ static int rs9_probe(struct i2c_client *client)
 
 	i2c_set_clientdata(client, rs9);
 	rs9->client = client;
-	rs9->chip_info = device_get_match_data(&client->dev);
+	rs9->chip_info = i2c_get_match_data(client);
 	if (!rs9->chip_info)
 		return -EINVAL;
 
-- 
2.25.1

Re: [PATCH] clk: rs9: Use i2c_get_match_data() instead of device_get_match_data()

[Stephen Boyd]

Quoting Biju Das (2023-09-09 09:02:18)
> The device_get_match_data(), is to get match data for firmware interfaces
> such as just OF/ACPI. This driver has I2C matching table as well. Use
> i2c_get_match_data() to get match data for I2C, ACPI and DT-based
> matching.
> 
> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
> ---

Applied to clk-next