mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Konrad Dybcio <konrad.dybcio@linaro.org>
To: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Rob Clark <robdclark@gmail.com>,
	Abhinav Kumar <quic_abhinavk@quicinc.com>,
	Sean Paul <sean@poorly.run>, David Airlie <airlied@gmail.com>,
	Daniel Vetter <daniel@ffwll.ch>,
	linux-arm-msm@vger.kernel.org, dri-devel@lists.freedesktop.org,
	freedreno@lists.freedesktop.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2 3/6] drm/msm/a2xx: Implement .gpu_busy
Date: Thu, 23 Feb 2023 11:27:59 +0100	[thread overview]
Message-ID: <f6acca8c-6b07-426d-80c7-a10dad20ed7c@linaro.org> (raw)
In-Reply-To: <CAA8EJprAxKCD_bJFdaMGhnwW56u+NLN_qxBV9aSzMTRdzsh07A@mail.gmail.com>



On 23.02.2023 03:09, Dmitry Baryshkov wrote:
> On Thu, 23 Feb 2023 at 03:47, Konrad Dybcio <konrad.dybcio@linaro.org> wrote:
>>
>> Implement gpu_busy based on the downstream msm-3.4 code [1]. This
>> allows us to use devfreq on this old old old hardware!
>>
>> [1] https://github.com/LineageOS/android_kernel_sony_apq8064/blob/lineage-16.0/drivers/gpu/msm/adreno_a2xx.c#L1975
>>
>> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
> 
> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> 
> Small nit below
> 
>> ---
>>  drivers/gpu/drm/msm/adreno/a2xx_gpu.c | 24 ++++++++++++++++++++++++
>>  1 file changed, 24 insertions(+)
>>
>> diff --git a/drivers/gpu/drm/msm/adreno/a2xx_gpu.c b/drivers/gpu/drm/msm/adreno/a2xx_gpu.c
>> index c67089a7ebc1..6f9876b37db5 100644
>> --- a/drivers/gpu/drm/msm/adreno/a2xx_gpu.c
>> +++ b/drivers/gpu/drm/msm/adreno/a2xx_gpu.c
>> @@ -481,6 +481,29 @@ a2xx_create_address_space(struct msm_gpu *gpu, struct platform_device *pdev)
>>         return aspace;
>>  }
>>
>> +/* While the precise size of this field is unknown, it holds at least these three values.. */
>> +static u64 a2xx_gpu_busy(struct msm_gpu *gpu, unsigned long *out_sample_rate)
>> +{
>> +       u64 busy_cycles;
>> +
>> +       /* Freeze the counter */
>> +       gpu_write(gpu, REG_A2XX_CP_PERFMON_CNTL, PERF_STATE_FREEZE);
>> +
>> +       busy_cycles = gpu_read64(gpu, REG_A2XX_RBBM_PERFCOUNTER1_LO);
>> +
>> +       /* Reset the counter */
>> +       gpu_write(gpu, REG_A2XX_CP_PERFMON_CNTL, PERF_STATE_RESET);
>> +
>> +       /* Re-enable the performance monitors */
>> +       gpu_rmw(gpu, REG_A2XX_RBBM_PM_OVERRIDE2, BIT(6), BIT(6));
> 
> It's DEBUG_PERF_SCLK_PM_OVERRIDE
> 
> See https://github.com/genesi/linux-legacy/blob/master/drivers/mxc/amd-gpu/include/reg/yamato/10/yamato_mask.h#L4428
I'll fix it up!

Konrad
> 
>> +       gpu_write(gpu, REG_A2XX_RBBM_PERFCOUNTER1_SELECT, 1);
>> +       gpu_write(gpu, REG_A2XX_CP_PERFMON_CNTL, PERF_STATE_ENABLE);
>> +
>> +       *out_sample_rate = clk_get_rate(gpu->core_clk);
>> +
>> +       return busy_cycles;
>> +}
>> +
>>  static u32 a2xx_get_rptr(struct msm_gpu *gpu, struct msm_ringbuffer *ring)
>>  {
>>         ring->memptrs->rptr = gpu_read(gpu, REG_AXXX_CP_RB_RPTR);
>> @@ -502,6 +525,7 @@ static const struct adreno_gpu_funcs funcs = {
>>  #if defined(CONFIG_DEBUG_FS) || defined(CONFIG_DEV_COREDUMP)
>>                 .show = adreno_show,
>>  #endif
>> +               .gpu_busy = a2xx_gpu_busy,
>>                 .gpu_state_get = a2xx_gpu_state_get,
>>                 .gpu_state_put = adreno_gpu_state_put,
>>                 .create_address_space = a2xx_create_address_space,
>>
>> --
>> 2.39.2
>>
> 
> 

  reply	other threads:[~2023-02-23 10:28 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-02-23  1:47 [PATCH v2 0/6] OPP and devfreq for all Adrenos Konrad Dybcio
2023-02-23  1:47 ` [PATCH v2 1/6] drm/msm/a2xx: Include perf counter reg values in XML Konrad Dybcio
2023-02-23  1:47 ` [PATCH v2 2/6] drm/msm/adreno: Use OPP for every GPU generation Konrad Dybcio
2023-02-23  1:59   ` Dmitry Baryshkov
2023-02-23  1:47 ` [PATCH v2 3/6] drm/msm/a2xx: Implement .gpu_busy Konrad Dybcio
2023-02-23  2:09   ` Dmitry Baryshkov
2023-02-23 10:27     ` Konrad Dybcio [this message]
2023-02-23  1:47 ` [PATCH v2 4/6] drm/msm/a3xx: " Konrad Dybcio
2023-02-23  1:47 ` [PATCH v2 5/6] drm/msm/a4xx: " Konrad Dybcio
2023-02-23  1:47 ` [PATCH v2 6/6] drm/msm/adreno: Enable optional icc voting from OPP tables Konrad Dybcio
2023-02-23  2:10   ` Dmitry Baryshkov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=f6acca8c-6b07-426d-80c7-a10dad20ed7c@linaro.org \
    --to=konrad.dybcio@linaro.org \
    --cc=airlied@gmail.com \
    --cc=daniel@ffwll.ch \
    --cc=dmitry.baryshkov@linaro.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=freedreno@lists.freedesktop.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=quic_abhinavk@quicinc.com \
    --cc=robdclark@gmail.com \
    --cc=sean@poorly.run \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®