From: Mukesh Kumar Savaliya <quic_msavaliy@quicinc.com>
To: Alexandre Belloni <alexandre.belloni@bootlin.com>, <linux@treblig.org>
Cc: <linux-i3c@lists.infradead.org>, <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH] i3c: Remove unused i3c_device_do_setdasa
Date: Mon, 13 Jan 2025 15:30:39 +0530 [thread overview]
Message-ID: <f764b674-3396-405a-804f-a50cd8caa124@quicinc.com> (raw)
In-Reply-To: <202501122254082b225acf@mail.local>
On 1/13/2025 4:24 AM, Alexandre Belloni wrote:
> Hello,
>
> On 21/12/2024 14:34:18+0000, linux@treblig.org wrote:
>> From: "Dr. David Alan Gilbert" <linux@treblig.org>
>>
>> i3c_device_do_setdasa() was added in 2022 as part of
>> commit 672825cd2823 ("i3c: export SETDASA method")
>>
>> but has been unused.
>>
>> It calls i3c_dev_setdasa_locked() which is now also unused.
>>
>> Remove them both.
I think there might be few drivers in future, which can use.
The function looks good to be used.
>> (This is effectively a revert of 672825cd2823).
>>
>
>
> Yeah, i guess this just means that we didn't see the device driver yet.
> I'm going to keep those function around for now.
>
Agree here. We should keep this function as is.
>> Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
>> ---
>> drivers/i3c/device.c | 20 --------------------
>> drivers/i3c/internals.h | 1 -
>> drivers/i3c/master.c | 19 -------------------
>> include/linux/i3c/device.h | 2 --
>> 4 files changed, 42 deletions(-)
>>
>> diff --git a/drivers/i3c/device.c b/drivers/i3c/device.c
>> index e80e48756914..984976f28314 100644
>> --- a/drivers/i3c/device.c
>> +++ b/drivers/i3c/device.c
>> @@ -54,26 +54,6 @@ int i3c_device_do_priv_xfers(struct i3c_device *dev,
>> }
>> EXPORT_SYMBOL_GPL(i3c_device_do_priv_xfers);
>>
>> -/**
>> - * i3c_device_do_setdasa() - do I3C dynamic address assignement with
>> - * static address
>> - *
>> - * @dev: device with which the DAA should be done
>> - *
>> - * Return: 0 in case of success, a negative error core otherwise.
>> - */
>> -int i3c_device_do_setdasa(struct i3c_device *dev)
>> -{
>> - int ret;
>> -
>> - i3c_bus_normaluse_lock(dev->bus);
>> - ret = i3c_dev_setdasa_locked(dev->desc);
>> - i3c_bus_normaluse_unlock(dev->bus);
>> -
>> - return ret;
>> -}
>> -EXPORT_SYMBOL_GPL(i3c_device_do_setdasa);
>> -
>> /**
>> * i3c_device_get_info() - get I3C device information
>> *
>> diff --git a/drivers/i3c/internals.h b/drivers/i3c/internals.h
>> index 433f6088b7ce..842e1a865877 100644
>> --- a/drivers/i3c/internals.h
>> +++ b/drivers/i3c/internals.h
>> @@ -13,7 +13,6 @@
>> void i3c_bus_normaluse_lock(struct i3c_bus *bus);
>> void i3c_bus_normaluse_unlock(struct i3c_bus *bus);
>>
>> -int i3c_dev_setdasa_locked(struct i3c_dev_desc *dev);
>> int i3c_dev_do_priv_xfers_locked(struct i3c_dev_desc *dev,
>> struct i3c_priv_xfer *xfers,
>> int nxfers);
>> diff --git a/drivers/i3c/master.c b/drivers/i3c/master.c
>> index 42310c9a00c2..000187339400 100644
>> --- a/drivers/i3c/master.c
>> +++ b/drivers/i3c/master.c
>> @@ -2916,25 +2916,6 @@ void i3c_master_unregister(struct i3c_master_controller *master)
>> }
>> EXPORT_SYMBOL_GPL(i3c_master_unregister);
>>
>> -int i3c_dev_setdasa_locked(struct i3c_dev_desc *dev)
>> -{
>> - struct i3c_master_controller *master;
>> -
>> - if (!dev)
>> - return -ENOENT;
>> -
>> - master = i3c_dev_get_master(dev);
>> - if (!master)
>> - return -EINVAL;
>> -
>> - if (!dev->boardinfo || !dev->boardinfo->init_dyn_addr ||
>> - !dev->boardinfo->static_addr)
>> - return -EINVAL;
>> -
>> - return i3c_master_setdasa_locked(master, dev->info.static_addr,
>> - dev->boardinfo->init_dyn_addr);
>> -}
>> -
>> int i3c_dev_do_priv_xfers_locked(struct i3c_dev_desc *dev,
>> struct i3c_priv_xfer *xfers,
>> int nxfers)
>> diff --git a/include/linux/i3c/device.h b/include/linux/i3c/device.h
>> index 0a8a44ac2f02..f4e924c179d7 100644
>> --- a/include/linux/i3c/device.h
>> +++ b/include/linux/i3c/device.h
>> @@ -301,8 +301,6 @@ int i3c_device_do_priv_xfers(struct i3c_device *dev,
>> struct i3c_priv_xfer *xfers,
>> int nxfers);
>>
>> -int i3c_device_do_setdasa(struct i3c_device *dev);
>> -
>> void i3c_device_get_info(const struct i3c_device *dev, struct i3c_device_info *info);
>>
>> struct i3c_ibi_payload {
>> --
>> 2.47.1
>>
>
prev parent reply other threads:[~2025-01-13 10:00 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-12-21 14:34 linux
2025-01-12 22:54 ` Alexandre Belloni
2025-01-12 22:57 ` Dr. David Alan Gilbert
2025-01-13 10:00 ` Mukesh Kumar Savaliya [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=f764b674-3396-405a-804f-a50cd8caa124@quicinc.com \
--to=quic_msavaliy@quicinc.com \
--cc=alexandre.belloni@bootlin.com \
--cc=linux-i3c@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@treblig.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®