From: Muhammad Usama Anjum <usama.anjum@arm.com>
To: Song Hu <husong@kylinos.cn>
Cc: usama.anjum@arm.com, linux-mm@kvack.org, shuah@kernel.org,
david@kernel.org, ljs@kernel.org, liam@infradead.org,
vbabka@kernel.org, rppt@kernel.org, surenb@google.com,
mhocko@suse.com, peterx@redhat.com, sarthak.sharma@arm.com,
linux-kselftest@vger.kernel.org, linux-kernel@vger.kernel.org,
akpm@linux-foundation.org
Subject: Re: [PATCH v4 3/3] selftests/mm: restore enable_soft_offline in hugetlb-soft-offline
Date: Tue, 25 Aug 2026 10:24:13 +0100 [thread overview]
Message-ID: <f7a206c7-8ff9-422c-85bc-6d10523563b2@arm.com> (raw)
In-Reply-To: <20260825085756.63030-4-husong@kylinos.cn>
On 25/08/2026 9:57 am, Song Hu wrote:
> hugetlb-soft-offline toggles /proc/sys/vm/enable_soft_offline between 1
> and 0 (test_soft_offline_common(1) then (0)) and leaves it at 0 when it
> finishes, silently disabling soft offlining for the whole system after
> the run.
>
> Save the original value before the test and restore it from an
> atexit() handler, as hugepage_restore_settings_atexit() in
> hugepage_settings.c already does. Use read_num()/write_num() from
> vm_util instead of hand-rolled popen()/fopen() helpers.
>
> The restore handler must not call write_num(): on failure it
> re-enters exit() through ksft_exit_fail_msg(), which is undefined
> behavior from inside an atexit handler. A non-root run hits it
> directly - the restore write fails the same way the write that
> triggered the exit did. Restore with plain open()/write(), best
> effort.
>
> Signed-off-by: Song Hu <husong@kylinos.cn>
>
> ---
>
> Changes since v3: the restore handler no longer uses write_num(),
> whose failure path calls exit() from inside an atexit handler -
> undefined behavior on a non-root run. Restore with plain
> open()/write(), best effort.
>
> .../selftests/mm/hugetlb-soft-offline.c | 49 +++++++++++--------
> 1 file changed, 28 insertions(+), 21 deletions(-)
>
> diff --git a/tools/testing/selftests/mm/hugetlb-soft-offline.c b/tools/testing/selftests/mm/hugetlb-soft-offline.c
> index bc202e4ed2bd..4af9d3db7b5b 100644
> --- a/tools/testing/selftests/mm/hugetlb-soft-offline.c
> +++ b/tools/testing/selftests/mm/hugetlb-soft-offline.c
> @@ -11,6 +11,7 @@
>
> #define _GNU_SOURCE
> #include <errno.h>
> +#include <fcntl.h>
> #include <stdlib.h>
> #include <stdio.h>
> #include <string.h>
> @@ -23,6 +24,7 @@
> #include <sys/types.h>
>
> #include "kselftest.h"
> +#include "vm_util.h"
> #include "hugepage_settings.h"
>
> #ifndef MADV_SOFT_OFFLINE
> @@ -31,6 +33,8 @@
>
> #define EPREFIX " !!! "
>
> +#define ENABLE_SOFT_OFFLINE_PATH "/proc/sys/vm/enable_soft_offline"
> +
> static int do_soft_offline(int fd, size_t len, int expect_errno)
> {
> char *filemap = NULL;
> @@ -77,26 +81,29 @@ static int do_soft_offline(int fd, size_t len, int expect_errno)
> return ret;
> }
>
> -static int set_enable_soft_offline(int value)
> -{
> - char cmd[256] = {0};
> - FILE *cmdfile = NULL;
> -
> - if (value != 0 && value != 1)
> - return -EINVAL;
> +static unsigned long orig_enable_soft_offline = -1UL;
>
> - sprintf(cmd, "echo %d > /proc/sys/vm/enable_soft_offline", value);
> - cmdfile = popen(cmd, "r");
> +/*
> + * Runs from an atexit handler, so it must not call anything that
> + * exits on failure: write_num() would re-enter exit() through
> + * ksft_exit_fail_msg().
> + */
> +static void restore_enable_soft_offline(void)
> +{
> + char buf[24];
> + int fd, len;
>
> - if (cmdfile)
> - ksft_print_msg("enable_soft_offline => %d\n", value);
> - else {
> - ksft_perror(EPREFIX "failed to set enable_soft_offline");
> - return errno;
> - }
> + if (orig_enable_soft_offline == -1UL)
> + return;
>
> - pclose(cmdfile);
> - return 0;
> + len = snprintf(buf, sizeof(buf), "%lu", orig_enable_soft_offline);
> + fd = open(ENABLE_SOFT_OFFLINE_PATH, O_WRONLY);
> + if (fd < 0)
> + return;
> + if (write(fd, buf, len) != len)
> + ksft_print_msg("failed to restore enable_soft_offline: %s\n",
> + strerror(errno));
> + close(fd);
> }
Looks good.
Reviewed-by: Muhammad Usama Anjum <usama.anjum@arm.com>
>
> static int create_hugetlbfs_file(struct statfs *file_stat)
> @@ -145,10 +152,7 @@ static void test_soft_offline_common(int enable_soft_offline)
> hugepagesize_kb = file_stat.f_bsize / 1024;
> ksft_print_msg("Hugepagesize is %ldkB\n", hugepagesize_kb);
>
> - if (set_enable_soft_offline(enable_soft_offline) != 0) {
> - close(fd);
> - ksft_exit_fail_msg("Failed to set enable_soft_offline\n");
> - }
> + write_num(ENABLE_SOFT_OFFLINE_PATH, enable_soft_offline);
>
> nr_hugepages_before = hugetlb_nr_default_pages();
>
> @@ -192,6 +196,9 @@ int main(int argc, char **argv)
>
> ksft_set_plan(2);
>
> + orig_enable_soft_offline = read_num(ENABLE_SOFT_OFFLINE_PATH);
> + atexit(restore_enable_soft_offline);
> +
> test_soft_offline_common(1);
> test_soft_offline_common(0);
>
--
Thanks,
Usama
next prev parent reply other threads:[~2026-08-25 9:25 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-08-25 8:57 [PATCH v4 0/3] selftests/mm: TAP output and global-state fixes Song Hu
2026-08-25 8:57 ` [PATCH v4 1/3] selftests/mm: emit TAP header in uffd-wp-mremap Song Hu
2026-09-10 9:28 ` David Hildenbrand (Arm)
2026-08-25 8:57 ` [PATCH v4 2/3] selftests/mm: emit TAP header and use TAP skip in mremap_test Song Hu
2026-09-10 9:33 ` David Hildenbrand (Arm)
2026-08-25 8:57 ` [PATCH v4 3/3] selftests/mm: restore enable_soft_offline in hugetlb-soft-offline Song Hu
2026-08-25 9:06 ` Song Hu
2026-08-25 9:24 ` Muhammad Usama Anjum [this message]
2026-09-10 9:36 ` David Hildenbrand (Arm)
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=f7a206c7-8ff9-422c-85bc-6d10523563b2@arm.com \
--to=usama.anjum@arm.com \
--cc=akpm@linux-foundation.org \
--cc=david@kernel.org \
--cc=husong@kylinos.cn \
--cc=liam@infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-kselftest@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=ljs@kernel.org \
--cc=mhocko@suse.com \
--cc=peterx@redhat.com \
--cc=rppt@kernel.org \
--cc=sarthak.sharma@arm.com \
--cc=shuah@kernel.org \
--cc=surenb@google.com \
--cc=vbabka@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®