[PATCH v2 1/2] arm64: dts: broadcom: rp1: Add USB nodes

[PATCH v2 1/2] arm64: dts: broadcom: rp1: Add USB nodes

[Andrea della Porta]

The RaspberryPi 5 has RP1 chipset containing two USB host controller,
while presenting two USB 2.0 and two USB 3.0 ports to the outside.

Add the relevant USB nodes to the devicetree.

Signed-off-by: Andrea della Porta <andrea.porta@suse.com>
---
 arch/arm64/boot/dts/broadcom/rp1-common.dtsi | 28 ++++++++++++++++++++
 1 file changed, 28 insertions(+)

diff --git a/arch/arm64/boot/dts/broadcom/rp1-common.dtsi b/arch/arm64/boot/dts/broadcom/rp1-common.dtsi
index 5002a375eb0b..3be14ac53c81 100644
--- a/arch/arm64/boot/dts/broadcom/rp1-common.dtsi
+++ b/arch/arm64/boot/dts/broadcom/rp1-common.dtsi
@@ -39,4 +39,32 @@ rp1_gpio: pinctrl@400d0000 {
 			     <1 IRQ_TYPE_LEVEL_HIGH>,
 			     <2 IRQ_TYPE_LEVEL_HIGH>;
 	};
+
+	rp1_usb0: usb@40200000 {
+		compatible = "snps,dwc3";
+		reg = <0x00 0x40200000  0x0 0x100000>;
+		interrupts = <31 IRQ_TYPE_EDGE_RISING>;
+		dr_mode = "host";
+		usb3-lpm-capable;
+		snps,dis_rxdet_inp3_quirk;
+		snps,parkmode-disable-hs-quirk;
+		snps,parkmode-disable-ss-quirk;
+		snps,tx-max-burst = /bits/ 8 <8>;
+		snps,tx-thr-num-pkt = /bits/ 8 <2>;
+		status = "disabled";
+	};
+
+	rp1_usb1: usb@40300000 {
+		compatible = "snps,dwc3";
+		reg = <0x00 0x40300000  0x0 0x100000>;
+		interrupts = <36 IRQ_TYPE_EDGE_RISING>;
+		dr_mode = "host";
+		usb3-lpm-capable;
+		snps,dis_rxdet_inp3_quirk;
+		snps,parkmode-disable-hs-quirk;
+		snps,parkmode-disable-ss-quirk;
+		snps,tx-max-burst = /bits/ 8 <8>;
+		snps,tx-thr-num-pkt = /bits/ 8 <2>;
+		status = "disabled";
+	};
 };
-- 
2.35.3

[PATCH v2 2/2] arm64: dts: broadcom: Enable USB devicetree entries for Rpi5

[Andrea della Porta]

RaspberryPi 5 presents two USB 2.0 and two USB 3.0 ports.

Configure and enable the USB nodes in the devicetree.

Signed-off-by: Andrea della Porta <andrea.porta@suse.com>
---
 .../arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

diff --git a/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts b/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts
index 865f092608a6..95ab67c7aa47 100644
--- a/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts
+++ b/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts
@@ -21,3 +21,20 @@
 &pcie2 {
 	#include "rp1-nexus.dtsi"
 };
+
+&rp1_gpio {
+	usb_vbus_default_state: usb-vbus-default-state {
+		function = "vbus1";
+		groups = "vbus1";
+	};
+};
+
+&rp1_usb0 {
+	pinctrl-0 = <&usb_vbus_default_state>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&rp1_usb1 {
+	status = "okay";
+};
-- 
2.35.3

Re: [PATCH v2 1/2] arm64: dts: broadcom: rp1: Add USB nodes

[Florian Fainelli]

On 9/5/25 02:42, Andrea della Porta wrote:
> The RaspberryPi 5 has RP1 chipset containing two USB host controller,
> while presenting two USB 2.0 and two USB 3.0 ports to the outside.
> 
> Add the relevant USB nodes to the devicetree.
> 
> Signed-off-by: Andrea della Porta <andrea.porta@suse.com>

Applied to devicetree-arm64/next, thanks!
-- 
Florian

Re: [PATCH v2 2/2] arm64: dts: broadcom: Enable USB devicetree entries for Rpi5

[Florian Fainelli]

On 9/5/25 02:42, Andrea della Porta wrote:
> RaspberryPi 5 presents two USB 2.0 and two USB 3.0 ports.
> 
> Configure and enable the USB nodes in the devicetree.
> 
> Signed-off-by: Andrea della Porta <andrea.porta@suse.com>

Applied to devicetree-arm64/next, thanks!
-- 
Florian