From: Shaohua Li <shli@fb.com>
To: <linux-kernel@vger.kernel.org>, <linux-block@vger.kernel.org>
Cc: <axboe@kernel.dk>, <tj@kernel.org>,
Vivek Goyal <vgoyal@redhat.com>, <jmoyer@redhat.com>,
<Kernel-team@fb.com>
Subject: [PATCH V7 02/18] blk-throttle: prepare support multiple limits
Date: Mon, 27 Mar 2017 10:51:30 -0700 [thread overview]
Message-ID: <fbc2878357f298a209935b0ca28db3f1a39d4dfd.1490634565.git.shli@fb.com> (raw)
In-Reply-To: <cover.1490634565.git.shli@fb.com>
We are going to support low/max limit, each cgroup will have 2 limits
after that. This patch prepares for the multiple limits change.
Signed-off-by: Shaohua Li <shli@fb.com>
---
block/blk-throttle.c | 110 ++++++++++++++++++++++++++++++++-------------------
1 file changed, 70 insertions(+), 40 deletions(-)
diff --git a/block/blk-throttle.c b/block/blk-throttle.c
index 0d5d85b..1da9f30 100644
--- a/block/blk-throttle.c
+++ b/block/blk-throttle.c
@@ -83,6 +83,11 @@ enum tg_state_flags {
#define rb_entry_tg(node) rb_entry((node), struct throtl_grp, rb_node)
+enum {
+ LIMIT_MAX,
+ LIMIT_CNT,
+};
+
struct throtl_grp {
/* must be the first member */
struct blkg_policy_data pd;
@@ -120,10 +125,10 @@ struct throtl_grp {
bool has_rules[2];
/* bytes per second rate limits */
- uint64_t bps[2];
+ uint64_t bps[2][LIMIT_CNT];
/* IOPS limits */
- unsigned int iops[2];
+ unsigned int iops[2][LIMIT_CNT];
/* Number of bytes disptached in current slice */
uint64_t bytes_disp[2];
@@ -147,6 +152,8 @@ struct throtl_data
/* Work for dispatching throttled bios */
struct work_struct dispatch_work;
+ unsigned int limit_index;
+ bool limit_valid[LIMIT_CNT];
};
static void throtl_pending_timer_fn(unsigned long arg);
@@ -198,6 +205,16 @@ static struct throtl_data *sq_to_td(struct throtl_service_queue *sq)
return container_of(sq, struct throtl_data, service_queue);
}
+static uint64_t tg_bps_limit(struct throtl_grp *tg, int rw)
+{
+ return tg->bps[rw][tg->td->limit_index];
+}
+
+static unsigned int tg_iops_limit(struct throtl_grp *tg, int rw)
+{
+ return tg->iops[rw][tg->td->limit_index];
+}
+
/**
* throtl_log - log debug message via blktrace
* @sq: the service_queue being reported
@@ -334,10 +351,10 @@ static struct blkg_policy_data *throtl_pd_alloc(gfp_t gfp, int node)
}
RB_CLEAR_NODE(&tg->rb_node);
- tg->bps[READ] = U64_MAX;
- tg->bps[WRITE] = U64_MAX;
- tg->iops[READ] = UINT_MAX;
- tg->iops[WRITE] = UINT_MAX;
+ tg->bps[READ][LIMIT_MAX] = U64_MAX;
+ tg->bps[WRITE][LIMIT_MAX] = U64_MAX;
+ tg->iops[READ][LIMIT_MAX] = UINT_MAX;
+ tg->iops[WRITE][LIMIT_MAX] = UINT_MAX;
return &tg->pd;
}
@@ -376,11 +393,14 @@ static void throtl_pd_init(struct blkg_policy_data *pd)
static void tg_update_has_rules(struct throtl_grp *tg)
{
struct throtl_grp *parent_tg = sq_to_tg(tg->service_queue.parent_sq);
+ struct throtl_data *td = tg->td;
int rw;
for (rw = READ; rw <= WRITE; rw++)
tg->has_rules[rw] = (parent_tg && parent_tg->has_rules[rw]) ||
- (tg->bps[rw] != U64_MAX || tg->iops[rw] != UINT_MAX);
+ (td->limit_valid[td->limit_index] &&
+ (tg_bps_limit(tg, rw) != U64_MAX ||
+ tg_iops_limit(tg, rw) != UINT_MAX));
}
static void throtl_pd_online(struct blkg_policy_data *pd)
@@ -632,11 +652,11 @@ static inline void throtl_trim_slice(struct throtl_grp *tg, bool rw)
if (!nr_slices)
return;
- tmp = tg->bps[rw] * throtl_slice * nr_slices;
+ tmp = tg_bps_limit(tg, rw) * throtl_slice * nr_slices;
do_div(tmp, HZ);
bytes_trim = tmp;
- io_trim = (tg->iops[rw] * throtl_slice * nr_slices)/HZ;
+ io_trim = (tg_iops_limit(tg, rw) * throtl_slice * nr_slices) / HZ;
if (!bytes_trim && !io_trim)
return;
@@ -682,7 +702,7 @@ static bool tg_with_in_iops_limit(struct throtl_grp *tg, struct bio *bio,
* have been trimmed.
*/
- tmp = (u64)tg->iops[rw] * jiffy_elapsed_rnd;
+ tmp = (u64)tg_iops_limit(tg, rw) * jiffy_elapsed_rnd;
do_div(tmp, HZ);
if (tmp > UINT_MAX)
@@ -697,7 +717,7 @@ static bool tg_with_in_iops_limit(struct throtl_grp *tg, struct bio *bio,
}
/* Calc approx time to dispatch */
- jiffy_wait = ((tg->io_disp[rw] + 1) * HZ)/tg->iops[rw] + 1;
+ jiffy_wait = ((tg->io_disp[rw] + 1) * HZ) / tg_iops_limit(tg, rw) + 1;
if (jiffy_wait > jiffy_elapsed)
jiffy_wait = jiffy_wait - jiffy_elapsed;
@@ -724,7 +744,7 @@ static bool tg_with_in_bps_limit(struct throtl_grp *tg, struct bio *bio,
jiffy_elapsed_rnd = roundup(jiffy_elapsed_rnd, throtl_slice);
- tmp = tg->bps[rw] * jiffy_elapsed_rnd;
+ tmp = tg_bps_limit(tg, rw) * jiffy_elapsed_rnd;
do_div(tmp, HZ);
bytes_allowed = tmp;
@@ -736,7 +756,7 @@ static bool tg_with_in_bps_limit(struct throtl_grp *tg, struct bio *bio,
/* Calc approx time to dispatch */
extra_bytes = tg->bytes_disp[rw] + bio->bi_iter.bi_size - bytes_allowed;
- jiffy_wait = div64_u64(extra_bytes * HZ, tg->bps[rw]);
+ jiffy_wait = div64_u64(extra_bytes * HZ, tg_bps_limit(tg, rw));
if (!jiffy_wait)
jiffy_wait = 1;
@@ -771,7 +791,8 @@ static bool tg_may_dispatch(struct throtl_grp *tg, struct bio *bio,
bio != throtl_peek_queued(&tg->service_queue.queued[rw]));
/* If tg->bps = -1, then BW is unlimited */
- if (tg->bps[rw] == U64_MAX && tg->iops[rw] == UINT_MAX) {
+ if (tg_bps_limit(tg, rw) == U64_MAX &&
+ tg_iops_limit(tg, rw) == UINT_MAX) {
if (wait)
*wait = 0;
return true;
@@ -1150,8 +1171,8 @@ static void tg_conf_updated(struct throtl_grp *tg)
throtl_log(&tg->service_queue,
"limit change rbps=%llu wbps=%llu riops=%u wiops=%u",
- tg->bps[READ], tg->bps[WRITE],
- tg->iops[READ], tg->iops[WRITE]);
+ tg_bps_limit(tg, READ), tg_bps_limit(tg, WRITE),
+ tg_iops_limit(tg, READ), tg_iops_limit(tg, WRITE));
/*
* Update has_rules[] flags for the updated tg's subtree. A tg is
@@ -1228,25 +1249,25 @@ static ssize_t tg_set_conf_uint(struct kernfs_open_file *of,
static struct cftype throtl_legacy_files[] = {
{
.name = "throttle.read_bps_device",
- .private = offsetof(struct throtl_grp, bps[READ]),
+ .private = offsetof(struct throtl_grp, bps[READ][LIMIT_MAX]),
.seq_show = tg_print_conf_u64,
.write = tg_set_conf_u64,
},
{
.name = "throttle.write_bps_device",
- .private = offsetof(struct throtl_grp, bps[WRITE]),
+ .private = offsetof(struct throtl_grp, bps[WRITE][LIMIT_MAX]),
.seq_show = tg_print_conf_u64,
.write = tg_set_conf_u64,
},
{
.name = "throttle.read_iops_device",
- .private = offsetof(struct throtl_grp, iops[READ]),
+ .private = offsetof(struct throtl_grp, iops[READ][LIMIT_MAX]),
.seq_show = tg_print_conf_uint,
.write = tg_set_conf_uint,
},
{
.name = "throttle.write_iops_device",
- .private = offsetof(struct throtl_grp, iops[WRITE]),
+ .private = offsetof(struct throtl_grp, iops[WRITE][LIMIT_MAX]),
.seq_show = tg_print_conf_uint,
.write = tg_set_conf_uint,
},
@@ -1272,18 +1293,25 @@ static u64 tg_prfill_max(struct seq_file *sf, struct blkg_policy_data *pd,
if (!dname)
return 0;
- if (tg->bps[READ] == U64_MAX && tg->bps[WRITE] == U64_MAX &&
- tg->iops[READ] == UINT_MAX && tg->iops[WRITE] == UINT_MAX)
+
+ if (tg->bps[READ][LIMIT_MAX] == U64_MAX &&
+ tg->bps[WRITE][LIMIT_MAX] == U64_MAX &&
+ tg->iops[READ][LIMIT_MAX] == UINT_MAX &&
+ tg->iops[WRITE][LIMIT_MAX] == UINT_MAX)
return 0;
- if (tg->bps[READ] != U64_MAX)
- snprintf(bufs[0], sizeof(bufs[0]), "%llu", tg->bps[READ]);
- if (tg->bps[WRITE] != U64_MAX)
- snprintf(bufs[1], sizeof(bufs[1]), "%llu", tg->bps[WRITE]);
- if (tg->iops[READ] != UINT_MAX)
- snprintf(bufs[2], sizeof(bufs[2]), "%u", tg->iops[READ]);
- if (tg->iops[WRITE] != UINT_MAX)
- snprintf(bufs[3], sizeof(bufs[3]), "%u", tg->iops[WRITE]);
+ if (tg->bps[READ][LIMIT_MAX] != U64_MAX)
+ snprintf(bufs[0], sizeof(bufs[0]), "%llu",
+ tg->bps[READ][LIMIT_MAX]);
+ if (tg->bps[WRITE][LIMIT_MAX] != U64_MAX)
+ snprintf(bufs[1], sizeof(bufs[1]), "%llu",
+ tg->bps[WRITE][LIMIT_MAX]);
+ if (tg->iops[READ][LIMIT_MAX] != UINT_MAX)
+ snprintf(bufs[2], sizeof(bufs[2]), "%u",
+ tg->iops[READ][LIMIT_MAX]);
+ if (tg->iops[WRITE][LIMIT_MAX] != UINT_MAX)
+ snprintf(bufs[3], sizeof(bufs[3]), "%u",
+ tg->iops[WRITE][LIMIT_MAX]);
seq_printf(sf, "%s rbps=%s wbps=%s riops=%s wiops=%s\n",
dname, bufs[0], bufs[1], bufs[2], bufs[3]);
@@ -1312,10 +1340,10 @@ static ssize_t tg_set_max(struct kernfs_open_file *of,
tg = blkg_to_tg(ctx.blkg);
- v[0] = tg->bps[READ];
- v[1] = tg->bps[WRITE];
- v[2] = tg->iops[READ];
- v[3] = tg->iops[WRITE];
+ v[0] = tg->bps[READ][LIMIT_MAX];
+ v[1] = tg->bps[WRITE][LIMIT_MAX];
+ v[2] = tg->iops[READ][LIMIT_MAX];
+ v[3] = tg->iops[WRITE][LIMIT_MAX];
while (true) {
char tok[27]; /* wiops=18446744073709551616 */
@@ -1352,10 +1380,10 @@ static ssize_t tg_set_max(struct kernfs_open_file *of,
goto out_finish;
}
- tg->bps[READ] = v[0];
- tg->bps[WRITE] = v[1];
- tg->iops[READ] = v[2];
- tg->iops[WRITE] = v[3];
+ tg->bps[READ][LIMIT_MAX] = v[0];
+ tg->bps[WRITE][LIMIT_MAX] = v[1];
+ tg->iops[READ][LIMIT_MAX] = v[2];
+ tg->iops[WRITE][LIMIT_MAX] = v[3];
tg_conf_updated(tg);
ret = 0;
@@ -1453,8 +1481,9 @@ bool blk_throtl_bio(struct request_queue *q, struct blkcg_gq *blkg,
/* out-of-limit, queue to @tg */
throtl_log(sq, "[%c] bio. bdisp=%llu sz=%u bps=%llu iodisp=%u iops=%u queued=%d/%d",
rw == READ ? 'R' : 'W',
- tg->bytes_disp[rw], bio->bi_iter.bi_size, tg->bps[rw],
- tg->io_disp[rw], tg->iops[rw],
+ tg->bytes_disp[rw], bio->bi_iter.bi_size,
+ tg_bps_limit(tg, rw),
+ tg->io_disp[rw], tg_iops_limit(tg, rw),
sq->nr_queued[READ], sq->nr_queued[WRITE]);
bio_associate_current(bio);
@@ -1565,6 +1594,7 @@ int blk_throtl_init(struct request_queue *q)
q->td = td;
td->queue = q;
+ td->limit_valid[LIMIT_MAX] = true;
/* activate policy */
ret = blkcg_activate_policy(q, &blkcg_policy_throtl);
if (ret)
--
2.9.3
next prev parent reply other threads:[~2017-03-27 18:18 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-03-27 17:51 [PATCH V7 00/18] blk-throttle: add .low limit Shaohua Li
2017-03-27 17:51 ` [PATCH V7 01/18] blk-throttle: use U64_MAX/UINT_MAX to replace -1 Shaohua Li
2017-03-27 17:51 ` Shaohua Li [this message]
2017-03-27 17:51 ` [PATCH V7 03/18] blk-throttle: add configure option for new .low interface Shaohua Li
2017-03-27 17:51 ` [PATCH V7 04/18] blk-throttle: add " Shaohua Li
2017-03-27 17:51 ` [PATCH V7 05/18] blk-throttle: configure bps/iops limit for cgroup in low limit Shaohua Li
2017-03-27 17:51 ` [PATCH V7 06/18] blk-throttle: add upgrade logic for LIMIT_LOW state Shaohua Li
2017-03-27 17:51 ` [PATCH V7 07/18] blk-throttle: add downgrade logic Shaohua Li
2017-03-27 17:51 ` [PATCH V7 08/18] blk-throttle: make sure expire time isn't too big Shaohua Li
2017-03-27 17:51 ` [PATCH V7 09/18] blk-throttle: make throtl_slice tunable Shaohua Li
2017-03-27 17:51 ` [PATCH V7 10/18] blk-throttle: choose a small throtl_slice for SSD Shaohua Li
2017-03-27 17:51 ` [PATCH V7 11/18] blk-throttle: detect completed idle cgroup Shaohua Li
2017-03-27 17:51 ` [PATCH V7 12/18] blk-throttle: make bandwidth change smooth Shaohua Li
2017-03-27 17:51 ` [PATCH V7 13/18] blk-throttle: add a simple idle detection Shaohua Li
2017-03-27 17:51 ` [PATCH V7 14/18] blk-throttle: add interface to configure idle time threshold Shaohua Li
2017-03-27 17:51 ` [PATCH V7 15/18] blk-throttle: ignore idle cgroup limit Shaohua Li
2017-03-27 17:51 ` [PATCH V7 16/18] blk-throttle: add interface for per-cgroup target latency Shaohua Li
2017-03-27 17:51 ` [PATCH V7 17/18] blk-throttle: add a mechanism to estimate IO latency Shaohua Li
2017-03-27 17:51 ` [PATCH V7 18/18] blk-throttle: add latency target support Shaohua Li
2017-03-27 18:15 ` [PATCH V7 00/18] blk-throttle: add .low limit Jens Axboe
2017-03-27 19:00 ` Shaohua Li
2017-03-27 19:11 ` Jens Axboe
2017-03-27 22:19 ` [PATCH 0/3] blk-throttle: add .low limit fix Shaohua Li
2017-03-27 22:19 ` [PATCH 1/3] block: track request size in blk_issue_stat Shaohua Li
2017-03-27 22:19 ` [PATCH 2/3] blk-throttle: add a mechanism to estimate IO latency Shaohua Li
2017-03-27 22:19 ` [PATCH 3/3] blk-throttle: add latency target support Shaohua Li
2017-03-28 15:58 ` [PATCH 0/3] blk-throttle: add .low limit fix Jens Axboe
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=fbc2878357f298a209935b0ca28db3f1a39d4dfd.1490634565.git.shli@fb.com \
--to=shli@fb.com \
--cc=Kernel-team@fb.com \
--cc=axboe@kernel.dk \
--cc=jmoyer@redhat.com \
--cc=linux-block@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=tj@kernel.org \
--cc=vgoyal@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®