[PATCH 0/2] mt8395-radxa-nio-12l: Add overlay for Radxa 8HD panel

[PATCH 0/2] mt8395-radxa-nio-12l: Add overlay for Radxa 8HD panel

[Julien Massot]

Hi,
small series to enable a DSI panel on Radxa NIO 12L.

The first patch adds missing dts nodes to expose some
feature of the DSI0 port.

The second patch adds the Radxa 8 HD panel as an overlay.

Tested on top of linux-next tag:next-20250226

Signed-off-by: Julien Massot <julien.massot@collabora.com>
---
Julien Massot (2):
      arm64: dts: mediatek: mt8395-nio-12l: Prepare MIPI DSI port
      arm64: dts: mediatek: mt8395-radxa-nio-12l: Add Radxa 8 HD panel

 arch/arm64/boot/dts/mediatek/Makefile              |  2 +
 .../mediatek/mt8395-radxa-nio-12l-8-hd-panel.dtso  | 64 ++++++++++++++++++++++
 .../boot/dts/mediatek/mt8395-radxa-nio-12l.dts     | 60 ++++++++++++++++++++
 3 files changed, 126 insertions(+)
---
base-commit: 8433c776e1eb1371f5cd40b5fd3a61f9c7b7f3ad
change-id: 20250226-radxa-panel-overlay-5424db95995c

Best regards,
-- 
Julien Massot <julien.massot@collabora.com>

[PATCH 1/2] arm64: dts: mediatek: mt8395-nio-12l: Prepare MIPI DSI port

[Julien Massot]

This board can use a MIPI-DSI panel on the DSI0 connector: in
preparation for adding an overlay for the Radxa Display 8HD,
add a pipeline connecting VDOSYS0 components to DSI0.

Also add the backlight, and some pin definitions available
through the DSI0 port.

Signed-off-by: Julien Massot <julien.massot@collabora.com>
---
 .../boot/dts/mediatek/mt8395-radxa-nio-12l.dts     | 60 ++++++++++++++++++++++
 1 file changed, 60 insertions(+)

diff --git a/arch/arm64/boot/dts/mediatek/mt8395-radxa-nio-12l.dts b/arch/arm64/boot/dts/mediatek/mt8395-radxa-nio-12l.dts
index 7184dc99296c7f5d749c7e6d378722677970b3b7..65c77e43d1cd4913b6741e25130febd746ff753c 100644
--- a/arch/arm64/boot/dts/mediatek/mt8395-radxa-nio-12l.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8395-radxa-nio-12l.dts
@@ -48,6 +48,17 @@ memory@40000000 {
 		reg = <0 0x40000000 0x1 0x0>;
 	};
 
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		brightness-levels = <0 1023>;
+		default-brightness-level = <576>;
+		enable-gpios = <&pio 107 GPIO_ACTIVE_HIGH>;
+		num-interpolated-steps = <1023>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&dsi0_backlight_pins>;
+		pwms = <&disp_pwm0 0 500000>;
+	};
+
 	wifi_vreg: regulator-wifi-3v3-en {
 		compatible = "regulator-fixed";
 		regulator-name = "wifi_3v3_en";
@@ -499,9 +510,20 @@ &mt6359_vsram_others_ldo_reg {
 	regulator-max-microvolt = <750000>;
 };
 
+&ovl0_in {
+	remote-endpoint = <&vdosys0_ep_main>;
+};
+
 &pio {
 	mediatek,rsel-resistance-in-si-unit;
 
+	dsi0_backlight_pins: dsi0-backlight-pins {
+		pins-backlight-en {
+			pinmux = <PINMUX_GPIO107__FUNC_GPIO107>;
+			output-high;
+		};
+	};
+
 	eth_default_pins: eth-default-pins {
 		pins-cc {
 			pinmux = <PINMUX_GPIO85__FUNC_GBE_TXC>,
@@ -699,6 +721,13 @@ pins-irq {
 		};
 	};
 
+	panel_default_pins: panel-pins {
+		pins-rst {
+			pinmux = <PINMUX_GPIO108__FUNC_GPIO108>;
+			bias-pull-up;
+		};
+	};
+
 	pcie0_default_pins: pcie0-default-pins {
 		pins-bus {
 			pinmux = <PINMUX_GPIO19__FUNC_WAKEN>,
@@ -717,6 +746,12 @@ pins-bus {
 		};
 	};
 
+	pwm0_default_pins: pwm0-pins {
+		pins-disp-pwm {
+			pinmux = <PINMUX_GPIO97__FUNC_DISP_PWM0>;
+		};
+	};
+
 	spi1_pins: spi1-default-pins {
 		pins-bus {
 			pinmux = <PINMUX_GPIO136__FUNC_SPIM1_CSB>,
@@ -737,6 +772,19 @@ pins-bus {
 		};
 	};
 
+	touch_pins: touch-pins {
+		pins-touch-int {
+			pinmux = <PINMUX_GPIO132__FUNC_GPIO132>;
+			input-enable;
+			bias-disable;
+		};
+
+		pins-touch-rst {
+			pinmux = <PINMUX_GPIO133__FUNC_GPIO133>;
+			output-high;
+		};
+	};
+
 	uart0_pins: uart0-pins {
 		pins-bus {
 			pinmux = <PINMUX_GPIO98__FUNC_UTXD0>,
@@ -912,6 +960,18 @@ &ssusb2 {
 	status = "okay";
 };
 
+&vdosys0 {
+	port {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vdosys0_ep_main: endpoint@0 {
+			reg = <0>;
+			remote-endpoint = <&ovl0_in>;
+		};
+	};
+};
+
 &xhci0 {
 	vbus-supply = <&otg_vbus_regulator>;
 	status = "okay";

-- 
2.48.1

Re: [PATCH 1/2] arm64: dts: mediatek: mt8395-nio-12l: Prepare MIPI DSI port

[AngeloGioacchino Del Regno]

Il 26/02/25 15:35, Julien Massot ha scritto:
> This board can use a MIPI-DSI panel on the DSI0 connector: in
> preparation for adding an overlay for the Radxa Display 8HD,
> add a pipeline connecting VDOSYS0 components to DSI0.
> 
> Also add the backlight, and some pin definitions available
> through the DSI0 port.
> 
> Signed-off-by: Julien Massot <julien.massot@collabora.com>
> ---
>   .../boot/dts/mediatek/mt8395-radxa-nio-12l.dts     | 60 ++++++++++++++++++++++
>   1 file changed, 60 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/mediatek/mt8395-radxa-nio-12l.dts b/arch/arm64/boot/dts/mediatek/mt8395-radxa-nio-12l.dts
> index 7184dc99296c7f5d749c7e6d378722677970b3b7..65c77e43d1cd4913b6741e25130febd746ff753c 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8395-radxa-nio-12l.dts
> +++ b/arch/arm64/boot/dts/mediatek/mt8395-radxa-nio-12l.dts
> @@ -48,6 +48,17 @@ memory@40000000 {
>   		reg = <0 0x40000000 0x1 0x0>;
>   	};
>   
> +	backlight: backlight {
> +		compatible = "pwm-backlight";
> +		brightness-levels = <0 1023>;
> +		default-brightness-level = <576>;
> +		enable-gpios = <&pio 107 GPIO_ACTIVE_HIGH>;
> +		num-interpolated-steps = <1023>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&dsi0_backlight_pins>;
> +		pwms = <&disp_pwm0 0 500000>;

This should be disabled, unless there is a display connected to the DSI connector.

If there's no display, there's no point in enabling any backlight, as that pin
may be reused somehow (with hardware hacks, maybe, yes, but still configuring
the PWM IP and the pin as PWM while unused is at least a waste of energy).

> +	};
> +
>   	wifi_vreg: regulator-wifi-3v3-en {
>   		compatible = "regulator-fixed";
>   		regulator-name = "wifi_3v3_en";
> @@ -499,9 +510,20 @@ &mt6359_vsram_others_ldo_reg {
>   	regulator-max-microvolt = <750000>;
>   };
>   
> +&ovl0_in {
> +	remote-endpoint = <&vdosys0_ep_main>;
> +};
> +

This goes to the overlay that enables the DSI display.

> @@ -912,6 +960,18 @@ &ssusb2 {
>   	status = "okay";
>   };
>   
> +&vdosys0 {
> +	port {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		vdosys0_ep_main: endpoint@0 {
> +			reg = <0>;
> +			remote-endpoint = <&ovl0_in>;
> +		};
> +	};
> +};

If you enable this path, in the event that the DSI display overlay is not added,
the mediatek-drm driver will fail probing: even if a second path is enabled and
that will succeed regardless of the first one failing, I don't see a reason why
whoever doesn't have a DSI display attached should see a miserable failure in the
kernel log :-)

Besides, mediatek-drm failing will also slow down boot for no reason.... etc etc.

Please move the display path setup to the DSI display overlay.

Thanks,
Angelo

> +
>   &xhci0 {
>   	vbus-supply = <&otg_vbus_regulator>;
>   	status = "okay";
> 

Re: [PATCH 1/2] arm64: dts: mediatek: mt8395-nio-12l: Prepare MIPI DSI port

[Julien Massot]

Hi Angelo,

On Mon, 2025-03-03 at 12:32 +0100, AngeloGioacchino Del Regno wrote:
> Il 26/02/25 15:35, Julien Massot ha scritto:
> > This board can use a MIPI-DSI panel on the DSI0 connector: in
> > preparation for adding an overlay for the Radxa Display 8HD,
> > add a pipeline connecting VDOSYS0 components to DSI0.
> > 
> > Also add the backlight, and some pin definitions available
> > through the DSI0 port.
> > 
> > Signed-off-by: Julien Massot <julien.massot@collabora.com>
> > ---
> >   .../boot/dts/mediatek/mt8395-radxa-nio-12l.dts     | 60 ++++++++++++++++++++++
> >   1 file changed, 60 insertions(+)
> > 
> > diff --git a/arch/arm64/boot/dts/mediatek/mt8395-radxa-nio-12l.dts
> > b/arch/arm64/boot/dts/mediatek/mt8395-radxa-nio-12l.dts
> > index 7184dc99296c7f5d749c7e6d378722677970b3b7..65c77e43d1cd4913b6741e25130febd746ff753c 100644
> > --- a/arch/arm64/boot/dts/mediatek/mt8395-radxa-nio-12l.dts
> > +++ b/arch/arm64/boot/dts/mediatek/mt8395-radxa-nio-12l.dts
> > @@ -48,6 +48,17 @@ memory@40000000 {
> >   		reg = <0 0x40000000 0x1 0x0>;
> >   	};
> >   
> > +	backlight: backlight {
> > +		compatible = "pwm-backlight";
> > +		brightness-levels = <0 1023>;
> > +		default-brightness-level = <576>;
> > +		enable-gpios = <&pio 107 GPIO_ACTIVE_HIGH>;
> > +		num-interpolated-steps = <1023>;
> > +		pinctrl-names = "default";
> > +		pinctrl-0 = <&dsi0_backlight_pins>;
> > +		pwms = <&disp_pwm0 0 500000>;
> 
> This should be disabled, unless there is a display connected to the DSI connector.
> 
> If there's no display, there's no point in enabling any backlight, as that pin
> may be reused somehow (with hardware hacks, maybe, yes, but still configuring
> the PWM IP and the pin as PWM while unused is at least a waste of energy).
> 
Yes, I will keep it disabled in the board dts.

> > +	};
> > +
> >   	wifi_vreg: regulator-wifi-3v3-en {
> >   		compatible = "regulator-fixed";
> >   		regulator-name = "wifi_3v3_en";
> > @@ -499,9 +510,20 @@ &mt6359_vsram_others_ldo_reg {
> >   	regulator-max-microvolt = <750000>;
> >   };
> >   
> > +&ovl0_in {
> > +	remote-endpoint = <&vdosys0_ep_main>;
> > +};
> > +
> 
> This goes to the overlay that enables the DSI display.
Ok

> 
> > @@ -912,6 +960,18 @@ &ssusb2 {
> >   	status = "okay";
> >   };
> >   
> > +&vdosys0 {
> > +	port {
> > +		#address-cells = <1>;
> > +		#size-cells = <0>;
> > +
> > +		vdosys0_ep_main: endpoint@0 {
> > +			reg = <0>;
> > +			remote-endpoint = <&ovl0_in>;
> > +		};
> > +	};
> > +};
> 
> If you enable this path, in the event that the DSI display overlay is not added,
> the mediatek-drm driver will fail probing: even if a second path is enabled and
> that will succeed regardless of the first one failing, I don't see a reason why
> whoever doesn't have a DSI display attached should see a miserable failure in the
> kernel log :-)
> 
> Besides, mediatek-drm failing will also slow down boot for no reason.... etc etc.
> 
> Please move the display path setup to the DSI display overlay.
Sure will move the display path setup to the display overlay.

Thank you,
Julien

[PATCH 2/2] arm64: dts: mediatek: mt8395-radxa-nio-12l: Add Radxa 8 HD panel

[Julien Massot]

The Radxa 8 HD touchscreen can be used with various Radxa board
and is sold appart from the Radxa NIO 12L development kit.

Add a DTS overlay for this panel.

Signed-off-by: Julien Massot <julien.massot@collabora.com>
---
 arch/arm64/boot/dts/mediatek/Makefile              |  2 +
 .../mediatek/mt8395-radxa-nio-12l-8-hd-panel.dtso  | 64 ++++++++++++++++++++++
 2 files changed, 66 insertions(+)

diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile
index ae1147eca9a915f117487101e2ad4acead97adfe..58484e8300632edbdef24bbda33ccf00db9df937 100644
--- a/arch/arm64/boot/dts/mediatek/Makefile
+++ b/arch/arm64/boot/dts/mediatek/Makefile
@@ -100,9 +100,11 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt8395-genio-1200-evk.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8390-genio-700-evk.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8395-kontron-3-5-sbc-i1200.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8395-radxa-nio-12l.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8395-radxa-nio-12l-8-hd-panel.dtbo
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8516-pumpkin.dtb
 
 # Device tree overlays support
 DTC_FLAGS_mt7986a-bananapi-bpi-r3 := -@
 DTC_FLAGS_mt7986a-bananapi-bpi-r3-mini := -@
 DTC_FLAGS_mt7988a-bananapi-bpi-r4 := -@
+DTC_FLAGS_mt8395-radxa-nio-12l := -@
diff --git a/arch/arm64/boot/dts/mediatek/mt8395-radxa-nio-12l-8-hd-panel.dtso b/arch/arm64/boot/dts/mediatek/mt8395-radxa-nio-12l-8-hd-panel.dtso
new file mode 100644
index 0000000000000000000000000000000000000000..5d633f61a62c3175fbfa133f3ea5b1a6a0b0fec5
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8395-radxa-nio-12l-8-hd-panel.dtso
@@ -0,0 +1,64 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Radxa Display 8 HD touchscreen module
+ * Copyright (C) 2025 Collabora Ltd.
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+&dsi0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	panel@0 {
+		compatible = "radxa,display-8hd-ad002", "jadard,jd9365da-h3";
+		reg = <0>;
+		backlight = <&backlight>;
+		vdd-supply = <&mt6359_vcn33_2_bt_ldo_reg>;
+		vccio-supply = <&mt6360_ldo2>;
+		reset-gpios = <&pio 108 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&panel_default_pins>;
+
+		port {
+			dsi_panel_in: endpoint {
+				remote-endpoint = <&dsi0_out>;
+			};
+		};
+	};
+};
+
+&disp_pwm0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_default_pins>;
+	status = "okay";
+};
+
+&dsi0_out {
+	remote-endpoint = <&dsi_panel_in>;
+};
+
+&mipi_tx0 {
+	status = "okay";
+};
+
+&i2c4 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	touchscreen@14 {
+		compatible = "goodix,gt911";
+		reg = <0x14>;
+		interrupts-extended = <&pio 132 IRQ_TYPE_EDGE_RISING>;
+		irq-gpios = <&pio 132 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&pio 133 GPIO_ACTIVE_HIGH>;
+		VDDIO-supply = <&mt6359_vcn33_2_bt_ldo_reg>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&touch_pins>;
+	};
+};

-- 
2.48.1