[PATCH v2 0/5] Fixes coding style in xilinx_emaclite.c

[PATCH v2 0/5] Fixes coding style in xilinx_emaclite.c

[Radhey Shyam Pandey]

This patchset fixes checkpatch and kernel-doc warnings in
xilinx emaclite driver. No functional change.

Changes from v1:
-In 2/5 patch refactor if-else to make failure path return early. 

Radhey Shyam Pandey (5):
  net: emaclite: Use __func__ instead of hardcoded name
  net: emaclite: Simplify if-else statements
  net: emaclite: update kernel-doc comments
  net: emaclite: Fix block comments style
  net: emaclite: Remove unnecessary spaces

 drivers/net/ethernet/xilinx/xilinx_emaclite.c |  109 ++++++++++++++-----------
 1 files changed, 63 insertions(+), 46 deletions(-)

[PATCH v2 1/5] net: emaclite: Use __func__ instead of hardcoded name

[Radhey Shyam Pandey]

Switch hardcoded function name with a reference to __func__ making
the code more maintainable. Address below checkpatch warning:

WARNING: Prefer using '"%s...", __func__' to using 'xemaclite_mdio_read',
this function's name, in a string
+               "xemaclite_mdio_read(phy_id=%i, reg=%x) == %x\n",

WARNING: Prefer using '"%s...", __func__' to using 'xemaclite_mdio_write',
this function's name, in a string
+               "xemaclite_mdio_write(phy_id=%i, reg=%x, val=%x)\n",

Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---
Changes from v1:
	-None
---
 drivers/net/ethernet/xilinx/xilinx_emaclite.c |    4 ++--
 1 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/xilinx/xilinx_emaclite.c b/drivers/net/ethernet/xilinx/xilinx_emaclite.c
index 2a0c06e..0544134 100644
--- a/drivers/net/ethernet/xilinx/xilinx_emaclite.c
+++ b/drivers/net/ethernet/xilinx/xilinx_emaclite.c
@@ -757,7 +757,7 @@ static int xemaclite_mdio_read(struct mii_bus *bus, int phy_id, int reg)
 	rc = xemaclite_readl(lp->base_addr + XEL_MDIORD_OFFSET);
 
 	dev_dbg(&lp->ndev->dev,
-		"xemaclite_mdio_read(phy_id=%i, reg=%x) == %x\n",
+		"%s(phy_id=%i, reg=%x) == %x\n", __func__,
 		phy_id, reg, rc);
 
 	return rc;
@@ -780,7 +780,7 @@ static int xemaclite_mdio_write(struct mii_bus *bus, int phy_id, int reg,
 	u32 ctrl_reg;
 
 	dev_dbg(&lp->ndev->dev,
-		"xemaclite_mdio_write(phy_id=%i, reg=%x, val=%x)\n",
+		"%s(phy_id=%i, reg=%x, val=%x)\n", __func__,
 		phy_id, reg, val);
 
 	if (xemaclite_mdio_wait(lp))
-- 
1.7.1

[PATCH v2 2/5] net: emaclite: Simplify if-else statements

[Radhey Shyam Pandey]

Remove else as it is not required with if doing a return.
Fixes below checkpatch warning.

WARNING: else is not generally useful after a break or return

Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---
Changes from v1:
	- Refactor to make failure path return early as suggested
	  by Joe Perches <joe@perches.com>
---
 drivers/net/ethernet/xilinx/xilinx_emaclite.c |   31 ++++++++++++-------------
 1 files changed, 15 insertions(+), 16 deletions(-)

diff --git a/drivers/net/ethernet/xilinx/xilinx_emaclite.c b/drivers/net/ethernet/xilinx/xilinx_emaclite.c
index 0544134..51f84f0 100644
--- a/drivers/net/ethernet/xilinx/xilinx_emaclite.c
+++ b/drivers/net/ethernet/xilinx/xilinx_emaclite.c
@@ -564,19 +564,18 @@ static void xemaclite_tx_handler(struct net_device *dev)
 	struct net_local *lp = netdev_priv(dev);
 
 	dev->stats.tx_packets++;
-	if (lp->deferred_skb) {
-		if (xemaclite_send_data(lp,
-					(u8 *) lp->deferred_skb->data,
-					lp->deferred_skb->len) != 0)
-			return;
-		else {
-			dev->stats.tx_bytes += lp->deferred_skb->len;
-			dev_kfree_skb_irq(lp->deferred_skb);
-			lp->deferred_skb = NULL;
-			netif_trans_update(dev); /* prevent tx timeout */
-			netif_wake_queue(dev);
-		}
-	}
+	if (!lp->deferred_skb)
+		return;
+
+	if (xemaclite_send_data(lp, (u8 *) lp->deferred_skb->data,
+				lp->deferred_skb->len))
+		return;
+
+	dev->stats.tx_bytes += lp->deferred_skb->len;
+	dev_kfree_skb_irq(lp->deferred_skb);
+	lp->deferred_skb = NULL;
+	netif_trans_update(dev); /* prevent tx timeout */
+	netif_wake_queue(dev);
 }
 
 /**
@@ -1052,13 +1051,13 @@ static bool get_bool(struct platform_device *ofdev, const char *s)
 {
 	u32 *p = (u32 *)of_get_property(ofdev->dev.of_node, s, NULL);
 
-	if (p) {
-		return (bool)*p;
-	} else {
+	if (!p) {
 		dev_warn(&ofdev->dev, "Parameter %s not found,"
 			"defaulting to false\n", s);
 		return false;
 	}
+
+	return (bool)*p;
 }
 
 static const struct net_device_ops xemaclite_netdev_ops;
-- 
1.7.1

Re: [PATCH v2 2/5] net: emaclite: Simplify if-else statements

[Joe Perches]

On Thu, 2018-06-28 at 13:09 +0530, Radhey Shyam Pandey wrote:
> Remove else as it is not required with if doing a return.
> Fixes below checkpatch warning.
[]
> diff --git a/drivers/net/ethernet/xilinx/xilinx_emaclite.c b/drivers/net/ethernet/xilinx/xilinx_emaclite.c
[]
> @@ -1052,13 +1051,13 @@ static bool get_bool(struct platform_device *ofdev, const char *s)
>  {
>  	u32 *p = (u32 *)of_get_property(ofdev->dev.of_node, s, NULL);
>  
> -	if (p) {
> -		return (bool)*p;
> -	} else {
> +	if (!p) {
>  		dev_warn(&ofdev->dev, "Parameter %s not found,"
>  			"defaulting to false\n", s);

Please coalesce the format onto a single line
and add the missing space after the comma.

>  		return false;
>  	}
> +
> +	return (bool)*p;
>  }
>  
>  static const struct net_device_ops xemaclite_netdev_ops;

[PATCH v2 3/5] net: emaclite: update kernel-doc comments

[Radhey Shyam Pandey]

This patch fixes below kernel-doc warnings:

Function parameter or member 'maxlen' not described in 'xemaclite_recv_data'
Function parameter or member 'address'not described in 'xemaclite_set_mac_address'
Excess function parameter 'addr' description in 'xemaclite_set_mac_address'
No description found for return value of 'xemaclite_interrupt'
No description found for return value of 'xemaclite_mdio_write'
Function parameter or member 'dev' not described in 'xemaclite_mdio_setup'
Excess function parameter 'ofdev' description in 'xemaclite_mdio_setup'
No description found for return value of 'xemaclite_open'
No description found for return value of 'xemaclite_close'
Excess function parameter 'match' description in 'xemaclite_of_probe'

Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
---
Changes from v1:
	- None
---
 drivers/net/ethernet/xilinx/xilinx_emaclite.c |   15 ++++++++++++---
 1 files changed, 12 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/xilinx/xilinx_emaclite.c b/drivers/net/ethernet/xilinx/xilinx_emaclite.c
index 51f84f0..2cc9353 100644
--- a/drivers/net/ethernet/xilinx/xilinx_emaclite.c
+++ b/drivers/net/ethernet/xilinx/xilinx_emaclite.c
@@ -369,6 +369,7 @@ static int xemaclite_send_data(struct net_local *drvdata, u8 *data,
  * xemaclite_recv_data - Receive a frame
  * @drvdata:	Pointer to the Emaclite device private data
  * @data:	Address where the data is to be received
+ * @maxlen:    Maximum supported ethernet packet length
  *
  * This function is intended to be called from the interrupt context or
  * with a wrapper which waits for the receive frame to be available.
@@ -488,7 +489,7 @@ static void xemaclite_update_address(struct net_local *drvdata,
 /**
  * xemaclite_set_mac_address - Set the MAC address for this device
  * @dev:	Pointer to the network device instance
- * @addr:	Void pointer to the sockaddr structure
+ * @address:	Void pointer to the sockaddr structure
  *
  * This function copies the HW address from the sockaddr strucutre to the
  * net_device structure and updates the address in HW.
@@ -638,6 +639,8 @@ static void xemaclite_rx_handler(struct net_device *dev)
  * @dev_id:	Void pointer to the network device instance used as callback
  *		reference
  *
+ * Return:	IRQ_HANDLED
+ *
  * This function handles the Tx and Rx interrupts of the EmacLite device.
  */
 static irqreturn_t xemaclite_interrupt(int irq, void *dev_id)
@@ -771,6 +774,8 @@ static int xemaclite_mdio_read(struct mii_bus *bus, int phy_id, int reg)
  *
  * This function waits till the device is ready to accept a new MDIO
  * request and then writes the val to the MDIO Write Data register.
+ *
+ * Return:      0 upon success or a negative error upon failure
  */
 static int xemaclite_mdio_write(struct mii_bus *bus, int phy_id, int reg,
 				u16 val)
@@ -804,7 +809,7 @@ static int xemaclite_mdio_write(struct mii_bus *bus, int phy_id, int reg,
 /**
  * xemaclite_mdio_setup - Register mii_bus for the Emaclite device
  * @lp:		Pointer to the Emaclite device private data
- * @ofdev:	Pointer to OF device structure
+ * @dev:	Pointer to OF device structure
  *
  * This function enables MDIO bus in the Emaclite device and registers a
  * mii_bus.
@@ -904,6 +909,9 @@ static void xemaclite_adjust_link(struct net_device *ndev)
  * This function sets the MAC address, requests an IRQ and enables interrupts
  * for the Emaclite device and starts the Tx queue.
  * It also connects to the phy device, if MDIO is included in Emaclite device.
+ *
+ * Return:	0 on success. -ENODEV, if PHY cannot be connected.
+ *		Non-zero error value on failure.
  */
 static int xemaclite_open(struct net_device *dev)
 {
@@ -974,6 +982,8 @@ static int xemaclite_open(struct net_device *dev)
  * This function stops the Tx queue, disables interrupts and frees the IRQ for
  * the Emaclite device.
  * It also disconnects the phy device associated with the Emaclite device.
+ *
+ * Return:	0, always.
  */
 static int xemaclite_close(struct net_device *dev)
 {
@@ -1065,7 +1075,6 @@ static bool get_bool(struct platform_device *ofdev, const char *s)
 /**
  * xemaclite_of_probe - Probe method for the Emaclite device.
  * @ofdev:	Pointer to OF device structure
- * @match:	Pointer to the structure used for matching a device
  *
  * This function probes for the Emaclite device in the device tree.
  * It initializes the driver data structure and the hardware, sets the MAC
-- 
1.7.1

[PATCH v2 4/5] net: emaclite: Fix block comments style

[Radhey Shyam Pandey]

This patch fixes below checkpatch warnings-

WARNING: Block comments use a trailing */ on a separate line
WARNING: Block comments use * on subsequent lines
WARNING: networking block comments don't use an empty /* line,
use /* Comment

Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
---
Changes from v1:
	- None
---
 drivers/net/ethernet/xilinx/xilinx_emaclite.c |   34 +++++++++++++++---------
 1 files changed, 21 insertions(+), 13 deletions(-)

diff --git a/drivers/net/ethernet/xilinx/xilinx_emaclite.c b/drivers/net/ethernet/xilinx/xilinx_emaclite.c
index 2cc9353..59f4ab8 100644
--- a/drivers/net/ethernet/xilinx/xilinx_emaclite.c
+++ b/drivers/net/ethernet/xilinx/xilinx_emaclite.c
@@ -70,7 +70,8 @@
 #define XEL_TSR_XMIT_IE_MASK	 0x00000008	/* Tx interrupt enable bit */
 #define XEL_TSR_XMIT_ACTIVE_MASK 0x80000000	/* Buffer is active, SW bit
 						 * only. This is not documented
-						 * in the HW spec */
+						 * in the HW spec
+						 */
 
 /* Define for programming the MAC address into the EmacLite */
 #define XEL_TSR_PROG_MAC_ADDR	(XEL_TSR_XMIT_BUSY_MASK | XEL_TSR_PROGRAM_MASK)
@@ -336,7 +337,8 @@ static int xemaclite_send_data(struct net_local *drvdata, u8 *data,
 			drvdata->next_tx_buf_to_use ^= XEL_BUFFER_OFFSET;
 	} else if (drvdata->tx_ping_pong != 0) {
 		/* If the expected buffer is full, try the other buffer,
-		 * if it is configured in HW */
+		 * if it is configured in HW
+		 */
 
 		addr = (void __iomem __force *)((u32 __force)addr ^
 						 XEL_BUFFER_OFFSET);
@@ -357,7 +359,8 @@ static int xemaclite_send_data(struct net_local *drvdata, u8 *data,
 	/* Update the Tx Status Register to indicate that there is a
 	 * frame to send. Set the XEL_TSR_XMIT_ACTIVE_MASK flag which
 	 * is used by the interrupt handler to check whether a frame
-	 * has been transmitted */
+	 * has been transmitted
+	 */
 	reg_data = xemaclite_readl(addr + XEL_TSR_OFFSET);
 	reg_data |= (XEL_TSR_XMIT_BUSY_MASK | XEL_TSR_XMIT_ACTIVE_MASK);
 	xemaclite_writel(reg_data, addr + XEL_TSR_OFFSET);
@@ -395,7 +398,8 @@ static u16 xemaclite_recv_data(struct net_local *drvdata, u8 *data, int maxlen)
 		/* The instance is out of sync, try other buffer if other
 		 * buffer is configured, return 0 otherwise. If the instance is
 		 * out of sync, do not update the 'next_rx_buf_to_use' since it
-		 * will correct on subsequent calls */
+		 * will correct on subsequent calls
+		 */
 		if (drvdata->rx_ping_pong != 0)
 			addr = (void __iomem __force *)((u32 __force)addr ^
 							 XEL_BUFFER_OFFSET);
@@ -409,13 +413,15 @@ static u16 xemaclite_recv_data(struct net_local *drvdata, u8 *data, int maxlen)
 			return 0;	/* No data was available */
 	}
 
-	/* Get the protocol type of the ethernet frame that arrived */
+	/* Get the protocol type of the ethernet frame that arrived
+	 */
 	proto_type = ((ntohl(xemaclite_readl(addr + XEL_HEADER_OFFSET +
 			XEL_RXBUFF_OFFSET)) >> XEL_HEADER_SHIFT) &
 			XEL_RPLR_LENGTH_MASK);
 
 	/* Check if received ethernet frame is a raw ethernet frame
-	 * or an IP packet or an ARP packet */
+	 * or an IP packet or an ARP packet
+	 */
 	if (proto_type > ETH_DATA_LEN) {
 
 		if (proto_type == ETH_P_IP) {
@@ -431,7 +437,8 @@ static u16 xemaclite_recv_data(struct net_local *drvdata, u8 *data, int maxlen)
 			length = XEL_ARP_PACKET_SIZE + ETH_HLEN + ETH_FCS_LEN;
 		else
 			/* Field contains type other than IP or ARP, use max
-			 * frame size and let user parse it */
+			 * frame size and let user parse it
+			 */
 			length = ETH_FRAME_LEN + ETH_FCS_LEN;
 	} else
 		/* Use the length in the frame, plus the header and trailer */
@@ -602,11 +609,11 @@ static void xemaclite_rx_handler(struct net_device *dev)
 		return;
 	}
 
-	/*
-	 * A new skb should have the data halfword aligned, but this code is
+	/* A new skb should have the data halfword aligned, but this code is
 	 * here just in case that isn't true. Calculate how many
 	 * bytes we should reserve to get the data to start on a word
-	 * boundary */
+	 * boundary
+	 */
 	align = BUFFER_ALIGN(skb->data);
 	if (align)
 		skb_reserve(skb, align);
@@ -708,8 +715,8 @@ static int xemaclite_mdio_wait(struct net_local *lp)
 	unsigned long end = jiffies + 2;
 
 	/* wait for the MDIO interface to not be busy or timeout
-	   after some time.
-	*/
+	 * after some time.
+	 */
 	while (xemaclite_readl(lp->base_addr + XEL_MDIOCTRL_OFFSET) &
 			XEL_MDIOCTRL_MDIOSTS_MASK) {
 		if (time_before_eq(end, jiffies)) {
@@ -1029,7 +1036,8 @@ static int xemaclite_send(struct sk_buff *orig_skb, struct net_device *dev)
 	if (xemaclite_send_data(lp, (u8 *) new_skb->data, len) != 0) {
 		/* If the Emaclite Tx buffer is busy, stop the Tx queue and
 		 * defer the skb for transmission during the ISR, after the
-		 * current transmission is complete */
+		 * current transmission is complete
+		 */
 		netif_stop_queue(dev);
 		lp->deferred_skb = new_skb;
 		/* Take the time stamp now, since we can't do this in an ISR. */
-- 
1.7.1

[PATCH v2 5/5] net: emaclite: Remove unnecessary spaces

[Radhey Shyam Pandey]

This patch fixes below checkpatch checks-

CHECK: spaces preferred around that '*' (ctx:VxV)
CHECK: No space is necessary after a cast

Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
---
Changes from v1:
	- None
---
 drivers/net/ethernet/xilinx/xilinx_emaclite.c |   27 +++++++++++++------------
 1 files changed, 14 insertions(+), 13 deletions(-)

diff --git a/drivers/net/ethernet/xilinx/xilinx_emaclite.c b/drivers/net/ethernet/xilinx/xilinx_emaclite.c
index 59f4ab8..8b93940 100644
--- a/drivers/net/ethernet/xilinx/xilinx_emaclite.c
+++ b/drivers/net/ethernet/xilinx/xilinx_emaclite.c
@@ -95,11 +95,11 @@
 
 
 
-#define TX_TIMEOUT		(60*HZ)		/* Tx timeout is 60 seconds. */
+#define TX_TIMEOUT		(60 * HZ)	/* Tx timeout is 60 seconds. */
 #define ALIGNMENT		4
 
 /* BUFFER_ALIGN(adr) calculates the number of bytes to the next alignment. */
-#define BUFFER_ALIGN(adr) ((ALIGNMENT - ((u32) adr)) % ALIGNMENT)
+#define BUFFER_ALIGN(adr) ((ALIGNMENT - ((u32)adr)) % ALIGNMENT)
 
 #ifdef __BIG_ENDIAN
 #define xemaclite_readl		ioread32be
@@ -239,8 +239,8 @@ static void xemaclite_aligned_write(void *src_ptr, u32 *dest_ptr,
 
 		/* Set up to output the remaining data */
 		align_buffer = 0;
-		to_u8_ptr = (u8 *) &align_buffer;
-		from_u8_ptr = (u8 *) from_u16_ptr;
+		to_u8_ptr = (u8 *)&align_buffer;
+		from_u8_ptr = (u8 *)from_u16_ptr;
 
 		/* Output the remaining data */
 		for (; length > 0; length--)
@@ -273,7 +273,7 @@ static void xemaclite_aligned_read(u32 *src_ptr, u8 *dest_ptr,
 	u32 align_buffer;
 
 	from_u32_ptr = src_ptr;
-	to_u16_ptr = (u16 *) dest_ptr;
+	to_u16_ptr = (u16 *)dest_ptr;
 
 	for (; length > 3; length -= 4) {
 		/* Copy each word into the temporary buffer */
@@ -289,9 +289,9 @@ static void xemaclite_aligned_read(u32 *src_ptr, u8 *dest_ptr,
 		u8 *to_u8_ptr, *from_u8_ptr;
 
 		/* Set up to read the remaining data */
-		to_u8_ptr = (u8 *) to_u16_ptr;
+		to_u8_ptr = (u8 *)to_u16_ptr;
 		align_buffer = *from_u32_ptr++;
-		from_u8_ptr = (u8 *) &align_buffer;
+		from_u8_ptr = (u8 *)&align_buffer;
 
 		/* Read the remaining data */
 		for (; length > 0; length--)
@@ -351,7 +351,7 @@ static int xemaclite_send_data(struct net_local *drvdata, u8 *data,
 		return -1; /* Buffer was full, return failure */
 
 	/* Write the frame to the buffer */
-	xemaclite_aligned_write(data, (u32 __force *) addr, byte_count);
+	xemaclite_aligned_write(data, (u32 __force *)addr, byte_count);
 
 	xemaclite_writel((byte_count & XEL_TPLR_LENGTH_MASK),
 			 addr + XEL_TPLR_OFFSET);
@@ -448,7 +448,7 @@ static u16 xemaclite_recv_data(struct net_local *drvdata, u8 *data, int maxlen)
 		length = maxlen;
 
 	/* Read from the EmacLite device */
-	xemaclite_aligned_read((u32 __force *) (addr + XEL_RXBUFF_OFFSET),
+	xemaclite_aligned_read((u32 __force *)(addr + XEL_RXBUFF_OFFSET),
 				data, length);
 
 	/* Acknowledge the frame */
@@ -479,7 +479,7 @@ static void xemaclite_update_address(struct net_local *drvdata,
 	/* Determine the expected Tx buffer address */
 	addr = drvdata->base_addr + drvdata->next_tx_buf_to_use;
 
-	xemaclite_aligned_write(address_ptr, (u32 __force *) addr, ETH_ALEN);
+	xemaclite_aligned_write(address_ptr, (u32 __force *)addr, ETH_ALEN);
 
 	xemaclite_writel(ETH_ALEN, addr + XEL_TPLR_OFFSET);
 
@@ -572,10 +572,11 @@ static void xemaclite_tx_handler(struct net_device *dev)
 	struct net_local *lp = netdev_priv(dev);
 
 	dev->stats.tx_packets++;
+
 	if (!lp->deferred_skb)
 		return;
 
-	if (xemaclite_send_data(lp, (u8 *) lp->deferred_skb->data,
+	if (xemaclite_send_data(lp, (u8 *)lp->deferred_skb->data,
 				lp->deferred_skb->len))
 		return;
 
@@ -620,7 +621,7 @@ static void xemaclite_rx_handler(struct net_device *dev)
 
 	skb_reserve(skb, 2);
 
-	len = xemaclite_recv_data(lp, (u8 *) skb->data, len);
+	len = xemaclite_recv_data(lp, (u8 *)skb->data, len);
 
 	if (!len) {
 		dev->stats.rx_errors++;
@@ -1033,7 +1034,7 @@ static int xemaclite_send(struct sk_buff *orig_skb, struct net_device *dev)
 	new_skb = orig_skb;
 
 	spin_lock_irqsave(&lp->reset_lock, flags);
-	if (xemaclite_send_data(lp, (u8 *) new_skb->data, len) != 0) {
+	if (xemaclite_send_data(lp, (u8 *)new_skb->data, len) != 0) {
 		/* If the Emaclite Tx buffer is busy, stop the Tx queue and
 		 * defer the skb for transmission during the ISR, after the
 		 * current transmission is complete
-- 
1.7.1