From: hitheshn@gmail.com
To: fa.linux.kernel@googlegroups.com
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>,
linux-kernel@vger.kernel.org,
Ludovic Desroches <ludovic.desroches@atmel.com>
Subject: Re: at91: SAM9G45 doesn't seem to register HDMAC controller anymore
Date: Sat, 23 Feb 2013 08:04:32 -0800 (PST) [thread overview]
Message-ID: <fc49612d-d057-4c75-a774-144c06f3e25e@googlegroups.com> (raw)
In-Reply-To: <fa.SybVggwovBMN0JQQ1QtgrjYn8OA@ifi.uio.no>
Guys,
Help! I have a similar problem.
SAM9G45 board doesn't seem to load the kernel.
When I see the boot log, it uncompresses the kernel and then just sits there.
Out of 10 boards, I see this behavior in 2 boards. I tried replacing the DDR RAM first and the CPU itself. But I don't see any change.
Can you guys help.
Boot log below -
-- pico-SAM9G45 Bootstrap 3.0 --
-- AT91SAM9G45-EK
-- Compiled: Jan 27 2011 09:45:18 --
-I- RTC Config: rcen: 1 osc32en: 0 osc32byp: 0 oscsel: 0
-I- RTC Config: rcen: 0 osc32en: 1 osc32byp: 0 oscsel: 1
-I- Setting: MCK = 133MHz
-I- Init DDRAM
-I- Init second bank SDRAM
-I- Loading to 0x70000000
-I- MEDSdcard init
-I- DMAD_Initialize channel 0
-I- Card Type 2, CSD_STRUCTURE 1
-I- SD/MMC TRANS SPEED 25000 KBit/s
-I- SD 4-BITS BUS
-I- CMD6(2) arg 0x80FFFF01
-I- SD HS Enable
-I- SD/MMC TRANS SPEED 50000 KBit/s
-I- SD/MMC card initialization successful
-I- Card size: 3781 MB
-I- Copy "linux.bin" from SdCard to 0x70000000
-E- File size 2584408 <-> Max allowed size 32
-I- Loading to 0x70107fd0 with size 0x00376f58
-I- MEDSdcard init
-I- DMAD_Initialize channel 0
-I- Card Type 2, CSD_STRUCTURE 1
-I- SD/MMC TRANS SPEED 25000 KBit/s
-I- SD 4-BITS BUS
-I- CMD6(2) arg 0x80FFFF01
-I- SD HS Enable
-I- SD/MMC TRANS SPEED 50000 KBit/s
-I- SD/MMC card initialization successful
-I- Card size: 3781 MB
-I- Copy "linux.bin" from SdCard to 0x70107fd0
-I- Modified jump to 0x70108010
The board just hangs here.
Thanks
-Hithesh
next parent reply other threads:[~2013-02-23 22:06 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <fa.kaJY9QQjCZvkw8CKMyaYEuiX9OA@ifi.uio.no>
[not found] ` <fa.5XzmYU8MXZrohXjB0g6dUho0bDk@ifi.uio.no>
[not found] ` <fa.SybVggwovBMN0JQQ1QtgrjYn8OA@ifi.uio.no>
2013-02-23 16:04 ` hitheshn [this message]
2012-02-29 12:21 Daniel Palmer
2012-02-29 16:36 ` Nicolas Ferre
2012-03-01 0:03 ` Daniel Palmer
2012-03-02 14:33 ` Daniel Palmer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=fc49612d-d057-4c75-a774-144c06f3e25e@googlegroups.com \
--to=hitheshn@gmail.com \
--cc=fa.linux.kernel@googlegroups.com \
--cc=linux-kernel@vger.kernel.org \
--cc=ludovic.desroches@atmel.com \
--cc=nicolas.ferre@atmel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®