Re: [PATCH v2 1/2] media: dt-bindings: media: i2c: document OV4689 DT bindings

[Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>]

On 15/09/2022 13:16, Mikhail Rudenko wrote:

> 
> I see, will drop the first "media:" in v3.
> 
>> Also you duplicated dt
>> bindings as prefix and commit msg (skip the latter).
> 
> Just to be clear, do you mean dropping "device-tree binding" phrase from
> the commit message?

Ah, sorry, I meant in the subject. You already have dt-bindings as
prefix, so no "DT bindings" at the end. Just:
media: dt-bindings: i2c: document OV4689

> 
>>> ---
>>>  .../bindings/media/i2c/ovti,ov4689.yaml       | 141 ++++++++++++++++++
>>>  MAINTAINERS                                   |   7 +
>>>  2 files changed, 148 insertions(+)
>>>  create mode 100644 Documentation/devicetree/bindings/media/i2c/ovti,ov4689.yaml
>>>
>>> diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov4689.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov4689.yaml
>>> new file mode 100644
>>> index 000000000000..376330b5572a
>>> --- /dev/null
>>> +++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov4689.yaml
>>> @@ -0,0 +1,141 @@
>>> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
>>> +%YAML 1.2
>>> +---
>>> +$id: http://devicetree.org/schemas/media/i2c/ovti,ov4689.yaml#
>>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>>> +
>>> +title: Omnivision OV4689 CMOS
>>> +
>>> +maintainers:
>>> +  - Mikhail Rudenko <mike.rudenko@gmail.com>
>>> +
>>> +description: |
>>> +  The Omnivision OV4689 is a high performance, 1/3-inch, 4 megapixel
>>> +  image sensor. Ihis chip supports high frame rate speeds up to 90 fps
>>> +  at 2688x1520 resolution. It is programmable through an I2C
>>> +  interface, and sensor output is sent via 1/2/4 lane MIPI CSI-2
>>> +  connection.
>>> +
>>> +allOf:
>>> +  - $ref: /schemas/media/video-interface-devices.yaml#
>>> +
>>> +properties:
>>> +  compatible:
>>> +    const: ovti,ov4689
>>> +
>>> +  reg:
>>> +    maxItems: 1
>>> +
>>> +  clocks:
>>> +    description:
>>> +      External clock (XVCLK) for the sensor, 6-64 MHz
>>> +    maxItems: 1
>>> +
>>> +  clock-names: true
>>
>> This has to be strictly defined - which name you expect.
> 
> Will fix in v3. Or maybe we should drop clock-names altogether and use
> devm_clk_get(&client->dev, NULL) in the driver instead (I've seen this
> approach in some existing drivers)?

Yes, usually clock-names for one entry does not make sense.

> 
>>> +
>>> +  dovdd-supply:
>>> +    description:
>>> +      Digital I/O voltage supply, 1.7-3.0 V
>>> +
>>> +  avdd-supply:
>>> +    description:
>>> +      Analog voltage supply, 2.6-3.0 V
>>> +
>>> +  dvdd-supply:
>>> +    description:
>>> +      Digital core voltage supply, 1.1-1.3 V
>>> +
>>> +  powerdown-gpios:
>>> +    maxItems: 1
>>
>> You can skip here maxItems - it is defined by gpio-consumer-common.
> 
> Ack, will fix in v3. Does this also apply to reset-gpios?

No.

https://elixir.bootlin.com/linux/v6.0-rc1/source/Documentation/devicetree/bindings/gpio/gpio-consumer-common.yaml


Best regards,
Krzysztof