From: ebiederm@xmission.com (Eric W. Biederman)
To: Mike Travis <travis@sgi.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>,
"H. Peter Anvin" <hpa@zytor.com>,
Jeremy Fitzhardinge <jeremy@goop.org>,
Christoph Lameter <cl@linux-foundation.org>,
Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
Ingo Molnar <mingo@elte.hu>,
Andrew Morton <akpm@linux-foundation.org>,
Jack Steiner <steiner@sgi.com>
Subject: Re: [crash, bisected] Re: [PATCH 3/4] x86_64: Fold pda into per cpu area
Date: Tue, 08 Jul 2008 16:36:49 -0700 [thread overview]
Message-ID: <m1r6a4c5im.fsf@frodo.ebiederm.org> (raw)
In-Reply-To: <4873B016.8010404@sgi.com> (Mike Travis's message of "Tue, 08 Jul 2008 11:21:10 -0700")
[-- Attachment #1: Type: text/plain, Size: 434 bytes --]
Mike Travis <travis@sgi.com> writes:
> Unfortunately it's back to the problem of faulting before x86_64_start_kernel()
> and grub just immediately reboots. So I'm back at analyzing assembler and
> config differences.
Ok. That is a narrow window of code. So it shouldn't be too bad, nasty though.
If you would like to trace through it I have attached my serial port
debugging routines that I use in that part of the code.
Eric
[-- Attachment #2: linux-debug.S --]
[-- Type: text/plain, Size: 5876 bytes --]
#if 1
/* Base Address */
#define TTYS0_BASE 0x3f8
/* Data */
#define TTYS0_RBR (TTYS0_BASE+0x00)
#define TTYS0_TBR (TTYS0_BASE+0x00)
/* Control */
#define TTYS0_IER (TTYS0_BASE+0x01)
#define TTYS0_IIR (TTYS0_BASE+0x02)
#define TTYS0_FCR (TTYS0_BASE+0x02)
#define TTYS0_LCR (TTYS0_BASE+0x03)
#define TTYS0_MCR (TTYS0_BASE+0x04)
#define TTYS0_DLL (TTYS0_BASE+0x00)
#define TTYS0_DLM (TTYS0_BASE+0x01)
/* Status */
#define TTYS0_LSR (TTYS0_BASE+0x05)
#define TTYS0_MSR (TTYS0_BASE+0x06)
#define TTYS0_SCR (TTYS0_BASE+0x07)
#define TTYS0_BAUD 9600
#define TTYS0_DIV (115200/TTYS0_BAUD)
#define TTYS0_DIV_LO (TTYS0_DIV&0xFF)
#define TTYS0_DIV_HI ((TTYS0_DIV >> 8)&0xFF)
#if ((115200%TTYS0_BAUD) != 0)
#error Bad ttyS0 baud rate
#endif
#define TTYS0_INIT \
/* disable interrupts */ \
movb $0x00, %al ; \
movw $TTYS0_IER, %dx ; \
outb %al, %dx ; \
; \
/* enable fifos */ \
movb $0x01, %al ; \
movw $TTYS0_FCR, %dx ; \
outb %al, %dx ; \
; \
/* Set Baud Rate Divisor to TTYS0_BAUD */ \
movw $TTYS0_LCR, %dx ; \
movb $0x83, %al ; \
outb %al, %dx ; \
; \
movw $TTYS0_DLL, %dx ; \
movb $TTYS0_DIV_LO, %al ; \
outb %al, %dx ; \
; \
movw $TTYS0_DLM, %dx ; \
movb $TTYS0_DIV_HI, %al ; \
outb %al, %dx ; \
; \
movw $TTYS0_LCR, %dx ; \
movb $0x03, %al ; \
outb %al, %dx
/* uses: ax, dx */
#define TTYS0_TX_AL \
mov %al, %ah ; \
9: mov $TTYS0_LSR, %dx ; \
inb %dx, %al ; \
test $0x20, %al ; \
je 9b ; \
mov $TTYS0_TBR, %dx ; \
mov %ah, %al ; \
outb %al, %dx
/* uses: ax, dx */
#define TTYS0_TX_CHAR(byte) \
mov byte, %al ; \
TTYS0_TX_AL
/* uses: eax, dx */
#define TTYS0_TX_HEX32(lword) \
mov lword, %eax ; \
shr $28, %eax ; \
and $0x0f, %al ; \
add $'0', %al ; \
cmp $'9', %al ; \
jle 9f ; \
add $39, %al ; \
9: ; \
TTYS0_TX_AL ; \
; \
mov lword, %eax ; \
shr $24, %eax ; \
and $0x0f, %al ; \
add $'0', %al ; \
cmp $'9', %al ; \
jle 9f ; \
add $39, %al ; \
9: ; \
TTYS0_TX_AL ; \
; \
mov lword, %eax ; \
shr $20, %eax ; \
and $0x0f, %al ; \
add $'0', %al ; \
cmp $'9', %al ; \
jle 9f ; \
add $39, %al ; \
9: ; \
TTYS0_TX_AL ; \
; \
mov lword, %eax ; \
shr $16, %eax ; \
and $0x0f, %al ; \
add $'0', %al ; \
cmp $'9', %al ; \
jle 9f ; \
add $39, %al ; \
9: ; \
TTYS0_TX_AL ; \
; \
mov lword, %eax ; \
shr $12, %eax ; \
and $0x0f, %al ; \
add $'0', %al ; \
cmp $'9', %al ; \
jle 9f ; \
add $39, %al ; \
9: ; \
TTYS0_TX_AL ; \
; \
mov lword, %eax ; \
shr $8, %eax ; \
and $0x0f, %al ; \
add $'0', %al ; \
cmp $'9', %al ; \
jle 9f ; \
add $39, %al ; \
9: ; \
TTYS0_TX_AL ; \
; \
mov lword, %eax ; \
shr $4, %eax ; \
and $0x0f, %al ; \
add $'0', %al ; \
cmp $'9', %al ; \
jle 9f ; \
add $39, %al ; \
9: ; \
TTYS0_TX_AL ; \
; \
mov lword, %eax ; \
and $0x0f, %al ; \
add $'0', %al ; \
cmp $'9', %al ; \
jle 9f ; \
add $39, %al ; \
9: ; \
TTYS0_TX_AL
/* uses: rax, dx */
#define TTYS0_TX_HEX64(lword) \
mov lword, %rax ; \
shr $60, %rax ; \
and $0x0f, %al ; \
add $'0', %al ; \
cmp $'9', %al ; \
jle 9f ; \
add $39, %al ; \
9: ; \
TTYS0_TX_AL ; \
; \
mov lword, %rax ; \
shr $56, %rax ; \
and $0x0f, %al ; \
add $'0', %al ; \
cmp $'9', %al ; \
jle 9f ; \
add $39, %al ; \
9: ; \
TTYS0_TX_AL ; \
; \
mov lword, %rax ; \
shr $52, %rax ; \
and $0x0f, %al ; \
add $'0', %al ; \
cmp $'9', %al ; \
jle 9f ; \
add $39, %al ; \
9: ; \
TTYS0_TX_AL ; \
; \
mov lword, %rax ; \
shr $48, %rax ; \
and $0x0f, %al ; \
add $'0', %al ; \
cmp $'9', %al ; \
jle 9f ; \
add $39, %al ; \
9: ; \
TTYS0_TX_AL ; \
; \
mov lword, %rax ; \
shr $44, %rax ; \
and $0x0f, %al ; \
add $'0', %al ; \
cmp $'9', %al ; \
jle 9f ; \
add $39, %al ; \
9: ; \
TTYS0_TX_AL ; \
; \
mov lword, %rax ; \
shr $40, %rax ; \
and $0x0f, %al ; \
add $'0', %al ; \
cmp $'9', %al ; \
jle 9f ; \
add $39, %al ; \
9: ; \
TTYS0_TX_AL ; \
; \
mov lword, %rax ; \
shr $36, %rax ; \
and $0x0f, %al ; \
add $'0', %al ; \
cmp $'9', %al ; \
jle 9f ; \
add $39, %al ; \
9: ; \
TTYS0_TX_AL ; \
; \
mov lword, %rax ; \
shr $32, %rax ; \
and $0x0f, %al ; \
add $'0', %al ; \
cmp $'9', %al ; \
jle 9f ; \
add $39, %al ; \
9: ; \
TTYS0_TX_AL ; \
; \
mov lword, %rax ; \
shr $28, %rax ; \
and $0x0f, %al ; \
add $'0', %al ; \
cmp $'9', %al ; \
jle 9f ; \
add $39, %al ; \
9: ; \
TTYS0_TX_AL ; \
; \
mov lword, %rax ; \
shr $24, %rax ; \
and $0x0f, %al ; \
add $'0', %al ; \
cmp $'9', %al ; \
jle 9f ; \
add $39, %al ; \
9: ; \
TTYS0_TX_AL ; \
; \
mov lword, %rax ; \
shr $20, %rax ; \
and $0x0f, %al ; \
add $'0', %al ; \
cmp $'9', %al ; \
jle 9f ; \
add $39, %al ; \
9: ; \
TTYS0_TX_AL ; \
; \
mov lword, %rax ; \
shr $16, %rax ; \
and $0x0f, %al ; \
add $'0', %al ; \
cmp $'9', %al ; \
jle 9f ; \
add $39, %al ; \
9: ; \
TTYS0_TX_AL ; \
; \
mov lword, %rax ; \
shr $12, %rax ; \
and $0x0f, %al ; \
add $'0', %al ; \
cmp $'9', %al ; \
jle 9f ; \
add $39, %al ; \
9: ; \
TTYS0_TX_AL ; \
; \
mov lword, %rax ; \
shr $8, %rax ; \
and $0x0f, %al ; \
add $'0', %al ; \
cmp $'9', %al ; \
jle 9f ; \
add $39, %al ; \
9: ; \
TTYS0_TX_AL ; \
; \
mov lword, %rax ; \
shr $4, %rax ; \
and $0x0f, %al ; \
add $'0', %al ; \
cmp $'9', %al ; \
jle 9f ; \
add $39, %al ; \
9: ; \
TTYS0_TX_AL ; \
; \
mov lword, %rax ; \
and $0x0f, %al ; \
add $'0', %al ; \
cmp $'9', %al ; \
jle 9f ; \
add $39, %al ; \
9: ; \
TTYS0_TX_AL
#define DEBUG(x) TTYS0_TX_CHAR($x) ; TTYS0_TX_CHAR($'\r') ; TTYS0_TX_CHAR($'\n')
#define DEBUG_TX_HEX32(x) TTYS0_TX_HEX32(x); TTYS0_TX_CHAR($'\r') ; TTYS0_TX_CHAR($'\n')
#define DEBUG_TX_HEX64(x) TTYS0_TX_HEX64(x); TTYS0_TX_CHAR($'\r') ; TTYS0_TX_CHAR($'\n')
#endif
next prev parent reply other threads:[~2008-07-08 23:42 UTC|newest]
Thread overview: 108+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-06-04 0:30 [PATCH 0/4] percpu: Optimize percpu accesses Mike Travis
2008-06-04 0:30 ` [PATCH 1/4] Zero based percpu: Infrastructure to rebase the per cpu area to zero Mike Travis
2008-06-10 10:06 ` Ingo Molnar
2008-06-04 0:30 ` [PATCH 2/4] x86: Extend percpu ops to 64 bit Mike Travis
2008-06-10 10:04 ` Ingo Molnar
2008-06-04 0:30 ` [PATCH 3/4] x86_64: Fold pda into per cpu area Mike Travis
2008-06-04 12:59 ` Jeremy Fitzhardinge
2008-06-04 13:48 ` Mike Travis
2008-06-04 13:58 ` Jeremy Fitzhardinge
2008-06-04 14:17 ` Mike Travis
2008-06-09 23:18 ` Christoph Lameter
2008-06-05 10:22 ` [crash, bisected] " Ingo Molnar
2008-06-05 16:02 ` Mike Travis
2008-06-06 8:29 ` Jeremy Fitzhardinge
2008-06-06 13:15 ` Mike Travis
2008-06-18 5:34 ` Jeremy Fitzhardinge
2008-06-10 21:31 ` Mike Travis
2008-06-18 17:36 ` Jeremy Fitzhardinge
2008-06-18 18:17 ` Mike Travis
2008-06-18 18:33 ` Ingo Molnar
2008-06-18 19:33 ` Jeremy Fitzhardinge
[not found] ` <48596893.4040908@sgi.com>
[not found] ` <485AADAC.3070301@sgi.com>
[not found] ` <485AB78B.5090904@goop.org>
[not found] ` <485AC120.6010202@sgi.com>
[not found] ` <485AC5D4.6040302@goop.org>
[not found] ` <485ACA8F.10006@sgi.com>
[not found] ` <485ACD92.8050109@sgi.com>
2008-06-19 21:35 ` Jeremy Fitzhardinge
2008-06-19 21:54 ` Jeremy Fitzhardinge
2008-06-19 22:13 ` Mike Travis
2008-06-19 22:21 ` Jeremy Fitzhardinge
2008-06-30 17:49 ` Mike Travis
2008-06-19 22:23 ` Jeremy Fitzhardinge
[not found] ` <485BDB04.4090709@sgi.com>
2008-06-20 17:25 ` Jeremy Fitzhardinge
2008-06-20 17:48 ` Christoph Lameter
2008-06-20 18:30 ` Mike Travis
2008-06-20 18:40 ` Jeremy Fitzhardinge
2008-06-20 18:37 ` Jeremy Fitzhardinge
2008-06-20 18:51 ` Christoph Lameter
2008-06-20 19:04 ` Jeremy Fitzhardinge
2008-06-20 19:21 ` H. Peter Anvin
2008-06-20 19:43 ` Eric W. Biederman
2008-06-20 20:04 ` Mike Travis
2008-06-20 20:37 ` Christoph Lameter
2008-06-20 19:06 ` Mike Travis
2008-06-20 20:25 ` Eric W. Biederman
2008-06-20 20:55 ` Christoph Lameter
2008-06-23 16:55 ` Mike Travis
2008-06-23 17:33 ` Jeremy Fitzhardinge
2008-06-23 18:04 ` Mike Travis
2008-06-23 18:36 ` Mike Travis
2008-06-23 19:41 ` Jeremy Fitzhardinge
2008-06-24 0:02 ` Mike Travis
2008-06-30 17:07 ` Mike Travis
2008-06-30 17:18 ` H. Peter Anvin
2008-06-30 17:57 ` Mike Travis
2008-06-30 20:50 ` Eric W. Biederman
2008-06-30 21:08 ` Jeremy Fitzhardinge
2008-07-01 8:40 ` Eric W. Biederman
2008-07-01 16:27 ` Jeremy Fitzhardinge
2008-07-01 16:55 ` Mike Travis
2008-07-01 16:56 ` H. Peter Anvin
2008-07-01 17:26 ` Jeremy Fitzhardinge
2008-07-01 20:40 ` Eric W. Biederman
2008-07-01 21:10 ` Jeremy Fitzhardinge
2008-07-01 21:39 ` Eric W. Biederman
2008-07-01 21:52 ` Jeremy Fitzhardinge
2008-07-02 0:20 ` H. Peter Anvin
2008-07-02 1:15 ` Mike Travis
2008-07-02 1:32 ` Eric W. Biederman
2008-07-02 1:51 ` Mike Travis
2008-07-02 2:50 ` Eric W. Biederman
2008-07-02 1:40 ` H. Peter Anvin
2008-07-02 1:44 ` Mike Travis
2008-07-02 1:45 ` H. Peter Anvin
2008-07-02 1:55 ` Mike Travis
2008-07-02 22:50 ` Mike Travis
2008-07-03 4:34 ` Eric W. Biederman
2008-07-07 17:17 ` Mike Travis
2008-07-07 19:46 ` Eric W. Biederman
2008-07-08 18:21 ` Mike Travis
2008-07-08 23:36 ` Eric W. Biederman [this message]
2008-07-08 23:49 ` Jeremy Fitzhardinge
2008-07-09 14:39 ` Mike Travis
2008-07-25 20:06 ` Mike Travis
2008-07-25 20:12 ` Jeremy Fitzhardinge
2008-07-25 20:34 ` Mike Travis
2008-07-25 20:43 ` Jeremy Fitzhardinge
2008-07-25 21:05 ` Mike Travis
2008-07-09 14:37 ` Mike Travis
2008-07-09 22:38 ` Eric W. Biederman
2008-07-09 23:30 ` Mike Travis
2008-07-10 0:04 ` Eric W. Biederman
2008-07-02 2:01 ` H. Peter Anvin
2008-07-02 3:08 ` Eric W. Biederman
2008-07-01 21:11 ` Andi Kleen
2008-07-01 21:42 ` Eric W. Biederman
2008-07-01 18:41 ` Eric W. Biederman
2008-07-01 12:09 ` Mike Travis
2008-07-01 11:49 ` Mike Travis
2008-06-30 17:43 ` Jeremy Fitzhardinge
2008-06-04 0:30 ` [PATCH 4/4] x86: Replace xxx_pda() operations with x86_xx_percpu() Mike Travis
2008-06-09 13:03 ` Ingo Molnar
2008-06-09 16:08 ` Mike Travis
2008-06-09 17:36 ` Mike Travis
2008-06-09 18:20 ` Christoph Lameter
2008-06-09 23:29 ` Jeremy Fitzhardinge
2008-06-10 10:09 ` Ingo Molnar
2008-06-10 15:07 ` Mike Travis
2008-06-04 10:18 ` [PATCH] x86: collapse the various size-dependent percpu accessors together Jeremy Fitzhardinge
2008-06-04 10:45 ` Jeremy Fitzhardinge
2008-06-04 11:29 ` Ingo Molnar
2008-06-04 12:09 ` Jeremy Fitzhardinge
2008-06-10 17:21 ` Christoph Lameter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=m1r6a4c5im.fsf@frodo.ebiederm.org \
--to=ebiederm@xmission.com \
--cc=akpm@linux-foundation.org \
--cc=cl@linux-foundation.org \
--cc=hpa@zytor.com \
--cc=jeremy@goop.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@elte.hu \
--cc=steiner@sgi.com \
--cc=travis@sgi.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome