* Re: [Bug 1428] New: 3c59x won't work at all with 2.6.0-test kernels
[not found] <600810000.1067231679@[10.10.2.4].suse.lists.linux.kernel>
@ 2003-10-27 15:24 ` Andi Kleen
0 siblings, 0 replies; 2+ messages in thread
From: Andi Kleen @ 2003-10-27 15:24 UTC (permalink / raw)
To: Martin J. Bligh; +Cc: kl, linux-kernel
"Martin J. Bligh" <mbligh@aracnet.com> writes:
> http://bugme.osdl.org/show_bug.cgi?id=1428
>
> Summary: 3c59x won't work at all with 2.6.0-test kernels.
> Kernel Version: 2.6.0-test4-mmX to 2.6.0-test8-mm1
> Status: NEW
> Severity: blocking
Does not deserve a blocking.
> Owner: jgarzik@pobox.com
> Submitter: kl@vsen.dk
>
>
> Distribution: Gentoo Linux
> Hardware Environment: IBM Thinkpad X20 - miniPCI 3com network:
> lspci with 2.4.22 kernel:
> 00:0a.0 Ethernet controller: 3Com Corporation 3c556B Hurricane CardBus (rev 20)
>
> Software Environment:
> glibc-2.3.2, gcc-3.2.3 - anything else?
> Problem Description:
> My 3c59x miniPci network card won't work at all with 2.6.0-test kernels.I think
> I've seen it work once, with an old 2.6.0-test kernel, but I'm not sure, and
> I've tried all the way back to 2.6.0-test3, and can't reproduce it (working that
> is).
> the Hardware mac address is set to all FF's on 2.60. ifconfig works fine - I
> just can't ping anything.
>
> with 2.4.22 it all works like a charm.
>
> Steps to reproduce:
> compile 2.6.0-testX with 3c59x as module or built-in.
3c59x works fine for me in 2.6.0test9
Most likely the user has some problems with interrupt routing.
I would try with pci=noacpi or acpi=off or disable IO-APIC support.
-Andi
^ permalink raw reply [flat|nested] 2+ messages in thread
* [Bug 1428] New: 3c59x won't work at all with 2.6.0-test kernels
@ 2003-10-27 5:14 Martin J. Bligh
0 siblings, 0 replies; 2+ messages in thread
From: Martin J. Bligh @ 2003-10-27 5:14 UTC (permalink / raw)
To: linux-kernel; +Cc: kl
http://bugme.osdl.org/show_bug.cgi?id=1428
Summary: 3c59x won't work at all with 2.6.0-test kernels.
Kernel Version: 2.6.0-test4-mmX to 2.6.0-test8-mm1
Status: NEW
Severity: blocking
Owner: jgarzik@pobox.com
Submitter: kl@vsen.dk
Distribution: Gentoo Linux
Hardware Environment: IBM Thinkpad X20 - miniPCI 3com network:
lspci with 2.4.22 kernel:
00:0a.0 Ethernet controller: 3Com Corporation 3c556B Hurricane CardBus (rev 20)
Software Environment:
glibc-2.3.2, gcc-3.2.3 - anything else?
Problem Description:
My 3c59x miniPci network card won't work at all with 2.6.0-test kernels.I think
I've seen it work once, with an old 2.6.0-test kernel, but I'm not sure, and
I've tried all the way back to 2.6.0-test3, and can't reproduce it (working that
is).
the Hardware mac address is set to all FF's on 2.60. ifconfig works fine - I
just can't ping anything.
with 2.4.22 it all works like a charm.
Steps to reproduce:
compile 2.6.0-testX with 3c59x as module or built-in.
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2003-11-18 13:48 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
[not found] <600810000.1067231679@[10.10.2.4].suse.lists.linux.kernel>
2003-10-27 15:24 ` [Bug 1428] New: 3c59x won't work at all with 2.6.0-test kernels Andi Kleen
2003-10-27 5:14 Martin J. Bligh
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®