From: "Adam Warner" <lists@consulting.net.nz>
To: linux-kernel@vger.kernel.org
Subject: 2.4.20: ALI 15X3 IDE partition check lockup
Date: Sat, 30 Nov 2002 13:10:31 +1300 [thread overview]
Message-ID: <pan.2002.11.30.00.10.30.340972@consulting.net.nz> (raw)
Hi all,
Alan's tree already fixes this hardware bug. I can boot a Compaq Presario
905 notebook with 2.4.20-rc4-ac1. This lockup also occurs with 2.4.19. I'd
like to test a patch so the fix can be merged into Marcelo's kernel.
ALI15X3: chipset revision 196
ALI15X3: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x8080-0x8087, BIOS settings: hda:DMA, hdb:pio
...
hda: FUJITSU MHR2030AT, ATA DISK drive
...
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
...
blk: queue c030e804, I/O limit 4095Mb (mask 0xffffffff)
hda: 58605120 sectors (30006 MB) w/2048KiB Cache, CHS=3648/255/63, UDMA(33)
Partition check:
hda:
The hard disk details are:
/dev/hda:
Model=FUJITSU MHR2030AT, FwRev=53BB, SerialNo= ...
Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=4
BuffType=DualPortCache, BuffSize=2048kB, MaxMultSect=16, MultSect=off
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=58605120
IORDY=yes, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2 udma3 udma4 *udma5
AdvancedPM=yes: mode=0x80 (128) WriteCache=enabled
Drive conforms to: ATA/ATAPI-6 T13 1410D revision 1: 2 3 4 5 6
It seems to be the same issue that Alan confirmed and fixed in August:
http://www.cs.helsinki.fi/linux/linux-kernel/2002-32/0112.html
Debian's 2.2.20 kernel is OK and it's also possible to get a stock 2.4
kernel working by NOT compiling in ALI 15X3 driver support (PIO mode is
used instead).
Regards,
Adam
next reply other threads:[~2002-11-30 0:05 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-11-30 0:10 Adam Warner [this message]
[not found] <fa.ju6eafv.91saog@ifi.uio.no>
2002-11-27 7:56 ` Sven Krohlas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=pan.2002.11.30.00.10.30.340972@consulting.net.nz \
--to=lists@consulting.net.nz \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®