2.4.20: ALI 15X3 IDE partition check lockup

2.4.20: ALI 15X3 IDE partition check lockup

[Adam Warner]

Hi all,

Alan's tree already fixes this hardware bug. I can boot a Compaq Presario
905 notebook with 2.4.20-rc4-ac1. This lockup also occurs with 2.4.19. I'd
like to test a patch so the fix can be merged into Marcelo's kernel.

ALI15X3: chipset revision 196
ALI15X3: not 100% native mode: will probe irqs later
   ide0: BM-DMA at 0x8080-0x8087, BIOS settings: hda:DMA, hdb:pio
   ...
hda: FUJITSU MHR2030AT, ATA DISK drive
...
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
...
blk: queue c030e804, I/O limit 4095Mb (mask 0xffffffff)
hda: 58605120 sectors (30006 MB) w/2048KiB Cache, CHS=3648/255/63, UDMA(33)
Partition check:
 hda:

The hard disk details are:

/dev/hda:

 Model=FUJITSU MHR2030AT, FwRev=53BB, SerialNo= ...
 Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs }
 RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=4
 BuffType=DualPortCache, BuffSize=2048kB, MaxMultSect=16, MultSect=off
 CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=58605120
 IORDY=yes, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120}
 PIO modes:  pio0 pio1 pio2 pio3 pio4 
 DMA modes:  mdma0 mdma1 mdma2 
 UDMA modes: udma0 udma1 udma2 udma3 udma4 *udma5 
 AdvancedPM=yes: mode=0x80 (128) WriteCache=enabled
 Drive conforms to: ATA/ATAPI-6 T13 1410D revision 1:  2 3 4 5 6

It seems to be the same issue that Alan confirmed and fixed in August:
http://www.cs.helsinki.fi/linux/linux-kernel/2002-32/0112.html

Debian's 2.2.20 kernel is OK and it's also possible to get a stock 2.4
kernel working by NOT compiling in ALI 15X3 driver support (PIO mode is
used instead).

Regards,
Adam

Re: 2.4.20: ALI 15X3 IDE partition check lockup

[Sven Krohlas]

Hi,

> Debian's 2.2.20 kernel is OK and it's also possible to get a stock 2.4
> kernel working by NOT compiling in ALI 15X3 driver support (PIO mode is
> used instead).

I can also make it working by using ide=nodma on my system.

Marcelo, please include a fix for this in 2.4.21. Thanks :-)