From: Waqar Hameed <waqar.hameed@axis.com>
To: Vignesh Raghavendra <vigneshr@ti.com>,
Julien Panis <jpanis@baylibre.com>,
William Breathitt Gray <wbg@kernel.org>,
Andrew Davis <afd@ti.com>
Cc: <kernel@axis.com>, <linux-iio@vger.kernel.org>,
<linux-omap@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Subject: [PATCH v3] counter: ti-ecap-capture: Use devm_pm_runtime_enable()
Date: Thu, 7 Aug 2025 15:21:08 +0200 [thread overview]
Message-ID: <pnda54bjmij.a.out@axis.com> (raw)
There is no need to register a manual `devm` action for
`pm_runtime_disable()` when `devm_pm_runtime_enable()` exists. It does
the same thing (but also calls `pm_runtime_dont_use_autosuspend()`,
which should be fine here).
Moreover, when `devm_add_action_or_reset()` fails, it is due to a failed
memory allocation and will thus return `-ENOMEM`. `dev_err_probe()`
doesn't do anything when error is `-ENOMEM`. Therefore, the call to
`dev_err_probe()` is useless. Note that `devm_pm_runtime_enable()` has a
tail call to `devm_add_action_or_reset()` and thus returns that value.
Therefore, replace `dev_err_probe()` with the returning value.
Signed-off-by: Waqar Hameed <waqar.hameed@axis.com>
---
Changes in v3:
* Remove the manual `devm_add_action_or_reset()` and use
`devm_pm_runtime_enable()` instead.
Link to v2: https://lore.kernel.org/lkml/pndms8em7tf.a.out@axis.com/
Changes in v2:
* Split the patch to one seperate patch for each sub-system.
Link to v1: https://lore.kernel.org/all/pnd7c0s6ji2.fsf@axis.com/
drivers/counter/ti-ecap-capture.c | 12 ++----------
1 file changed, 2 insertions(+), 10 deletions(-)
diff --git a/drivers/counter/ti-ecap-capture.c b/drivers/counter/ti-ecap-capture.c
index 3faaf7f60539..3586a7ab9887 100644
--- a/drivers/counter/ti-ecap-capture.c
+++ b/drivers/counter/ti-ecap-capture.c
@@ -465,11 +465,6 @@ static irqreturn_t ecap_cnt_isr(int irq, void *dev_id)
return IRQ_HANDLED;
}
-static void ecap_cnt_pm_disable(void *dev)
-{
- pm_runtime_disable(dev);
-}
-
static int ecap_cnt_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
@@ -523,12 +518,9 @@ static int ecap_cnt_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, counter_dev);
- pm_runtime_enable(dev);
-
- /* Register a cleanup callback to care for disabling PM */
- ret = devm_add_action_or_reset(dev, ecap_cnt_pm_disable, dev);
+ ret = devm_pm_runtime_enable(dev);
if (ret)
- return dev_err_probe(dev, ret, "failed to add pm disable action\n");
+ return ret;
ret = devm_counter_add(dev, counter_dev);
if (ret)
base-commit: 260f6f4fda93c8485c8037865c941b42b9cba5d2
--
2.39.5
next reply other threads:[~2025-08-07 13:21 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-08-07 13:21 Waqar Hameed [this message]
2025-08-07 13:56 ` Andrew Davis
2025-08-24 8:06 ` William Breathitt Gray
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=pnda54bjmij.a.out@axis.com \
--to=waqar.hameed@axis.com \
--cc=afd@ti.com \
--cc=jpanis@baylibre.com \
--cc=kernel@axis.com \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=vigneshr@ti.com \
--cc=wbg@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®