* 2.6.3-rc1: snd_intel8x0 still too fast @ 2004-02-07 15:10 Meelis Roos 2004-02-08 23:11 ` Bill Davidsen 2004-02-09 18:23 ` Takashi Iwai 0 siblings, 2 replies; 15+ messages in thread From: Meelis Roos @ 2004-02-07 15:10 UTC (permalink / raw) To: linux-kernel I tried 2.6.3-rc1 to see if the problems with intel 8x0 audio are fixed. Nope, the sound is still at least twice as fast as normal. KDE login sound, mplayer sound etc. This is I815 integrated audio on Intel D815EEA2 mainboard, Debian unstable up-to-date. 2.4.latest kernel with OSS is OK. 2.6 with ALSA was OK at about 2.6.0. 2.6 with OSS is also OK. Also, I can load both i810_audio and snd_intel8x0 simultaneously in 2.6 - probably a resource management problem. -- Meelis Roos (mroos@linux.ee) ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: 2.6.3-rc1: snd_intel8x0 still too fast 2004-02-07 15:10 2.6.3-rc1: snd_intel8x0 still too fast Meelis Roos @ 2004-02-08 23:11 ` Bill Davidsen 2004-02-09 18:23 ` Takashi Iwai 1 sibling, 0 replies; 15+ messages in thread From: Bill Davidsen @ 2004-02-08 23:11 UTC (permalink / raw) To: Meelis Roos; +Cc: linux-kernel Meelis Roos wrote: > I tried 2.6.3-rc1 to see if the problems with intel 8x0 audio are fixed. > Nope, the sound is still at least twice as fast as normal. KDE login > sound, mplayer sound etc. This is I815 integrated audio on Intel > D815EEA2 mainboard, Debian unstable up-to-date. 2.4.latest kernel with > OSS is OK. 2.6 with ALSA was OK at about 2.6.0. 2.6 with OSS is also OK. > > Also, I can load both i810_audio and snd_intel8x0 simultaneously in 2.6 > - probably a resource management problem. Odd, I only have the problem with xmms, mplayer works fine. -- bill davidsen <davidsen@tmr.com> CTO TMR Associates, Inc Doing interesting things with small computers since 1979 ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: 2.6.3-rc1: snd_intel8x0 still too fast 2004-02-07 15:10 2.6.3-rc1: snd_intel8x0 still too fast Meelis Roos 2004-02-08 23:11 ` Bill Davidsen @ 2004-02-09 18:23 ` Takashi Iwai 2004-02-09 18:35 ` Meelis Roos 1 sibling, 1 reply; 15+ messages in thread From: Takashi Iwai @ 2004-02-09 18:23 UTC (permalink / raw) To: Meelis Roos; +Cc: linux-kernel At Sat, 7 Feb 2004 17:10:31 +0200 (EET), Meelis Roos wrote: > > I tried 2.6.3-rc1 to see if the problems with intel 8x0 audio are fixed. > Nope, the sound is still at least twice as fast as normal. KDE login > sound, mplayer sound etc. This is I815 integrated audio on Intel > D815EEA2 mainboard, Debian unstable up-to-date. 2.4.latest kernel with > OSS is OK. 2.6 with ALSA was OK at about 2.6.0. 2.6 with OSS is also OK. which ac97 codec chip? check /proc/asound/card0/codec97#0/* files. also, you must have seen a kernel message like intel8x0: clocking to 48000 check which value was detected. > Also, I can load both i810_audio and snd_intel8x0 simultaneously in 2.6 > - probably a resource management problem. hmm, i810_audio.c doesn't check the return value of request_region()... -- Takashi Iwai <tiwai@suse.de> ALSA Developer - www.alsa-project.org ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: 2.6.3-rc1: snd_intel8x0 still too fast 2004-02-09 18:23 ` Takashi Iwai @ 2004-02-09 18:35 ` Meelis Roos 2004-02-09 18:46 ` Takashi Iwai 0 siblings, 1 reply; 15+ messages in thread From: Meelis Roos @ 2004-02-09 18:35 UTC (permalink / raw) To: Takashi Iwai; +Cc: linux-kernel Today mplayer was OK when I tested, didn't retry KDE login. But the kernel is the same, I have not rebooted inbetween. > which ac97 codec chip? check /proc/asound/card0/codec97#0/* files. i810_audio that I have currently loaded tells it's ac97_codec: AC97 Audio codec, id: ADS96 (Analog Devices AD1885) ALSA loaded, from /proc/asound/card0/codec97#0/ac97#0-0 0-0/0: Analog Devices AD1885 Capabilities : -headphone out- DAC resolution : 16-bit ADC resolution : 16-bit 3D enhancement : Analog Devices Phat Stereo Current setup Mic gain : +0dB [+0dB] POP path : pre 3D Sim. stereo : off 3D enhancement : off Loudness : off Mono output : MIX Mic select : Mic1 ADC/DAC loopback : off Extended ID : codec=0 rev=0 DSA=0 VRA Extended status : VRA PCM front DAC : 48000Hz PCM ADC : 48000Hz AD18XX configuration Unchained : 0x1000,0x0000,0x0000 Chained : 0x0000,0x0000,0x0000 And +regs: 0:00 = 0410 0:02 = bf3f 0:04 = bf3f 0:06 = 801f 0:08 = 0000 0:0a = 801e 0:0c = 801f 0:0e = 801f 0:10 = 9f1f 0:12 = 9f1f 0:14 = 9f1f 0:16 = 9f1f 0:18 = 9f1f 0:1a = 0000 0:1c = 0000 0:1e = 0000 0:20 = 0000 0:22 = 0000 0:24 = 0000 0:26 = 000f 0:28 = 0001 0:2a = 0001 0:2c = bb80 0:2e = 0000 0:30 = 0000 0:32 = bb80 0:34 = 0000 0:36 = 0000 0:38 = 0000 0:3a = 0000 0:3c = 0000 0:3e = 0000 0:40 = 0000 0:42 = 0000 0:44 = 0000 0:46 = 0000 0:48 = 0000 0:4a = 0000 0:4c = 0000 0:4e = 0000 0:50 = 0000 0:52 = 0000 0:54 = 0000 0:56 = 0000 0:58 = 0000 0:5a = 0000 0:5c = 0000 0:5e = 0000 0:60 = 0000 0:62 = 0000 0:64 = 0000 0:66 = 0000 0:68 = 0000 0:6a = 0000 0:6c = 0000 0:6e = 0000 0:70 = 2000 0:72 = 0300 0:74 = 1000 0:76 = 0404 0:78 = bb80 0:7a = bb80 0:7c = 4144 0:7e = 5360 > also, you must have seen a kernel message like > intel8x0: clocking to 48000 Did try twice: intel8x0_measure_ac97_clock: measured 50040 usecs intel8x0: clocking to 41146 intel8x0_measure_ac97_clock: measured 49395 usecs intel8x0: clocking to 41145 -- Meelis Roos (mroos@linux.ee) ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: 2.6.3-rc1: snd_intel8x0 still too fast 2004-02-09 18:35 ` Meelis Roos @ 2004-02-09 18:46 ` Takashi Iwai 2004-02-10 11:22 ` Meelis Roos 0 siblings, 1 reply; 15+ messages in thread From: Takashi Iwai @ 2004-02-09 18:46 UTC (permalink / raw) To: Meelis Roos; +Cc: linux-kernel At Mon, 9 Feb 2004 20:35:12 +0200 (EET), Meelis Roos wrote: > > Today mplayer was OK when I tested, didn't retry KDE login. But the > kernel is the same, I have not rebooted inbetween. weird... cpufreq is running? > > also, you must have seen a kernel message like > > intel8x0: clocking to 48000 > > Did try twice: > > intel8x0_measure_ac97_clock: measured 50040 usecs > intel8x0: clocking to 41146 > > intel8x0_measure_ac97_clock: measured 49395 usecs > intel8x0: clocking to 41145 and now you got the correct output? if so, you can pass the value via ac97_clock option. i guess the high pitch playback occured because of the wrong detection of ac97 clock by some reason. -- Takashi Iwai <tiwai@suse.de> ALSA Developer - www.alsa-project.org ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: 2.6.3-rc1: snd_intel8x0 still too fast 2004-02-09 18:46 ` Takashi Iwai @ 2004-02-10 11:22 ` Meelis Roos 2004-02-10 11:43 ` Takashi Iwai 2004-02-10 22:34 ` Peter Chubb 0 siblings, 2 replies; 15+ messages in thread From: Meelis Roos @ 2004-02-10 11:22 UTC (permalink / raw) To: Takashi Iwai; +Cc: linux-kernel > > Today mplayer was OK when I tested, didn't retry KDE login. But the > > kernel is the same, I have not rebooted inbetween. > > weird... cpufreq is running? No, it's a desktop Celeron 900. > > Did try twice: > > > > intel8x0_measure_ac97_clock: measured 50040 usecs > > intel8x0: clocking to 41146 > > > > intel8x0_measure_ac97_clock: measured 49395 usecs > > intel8x0: clocking to 41145 > > and now you got the correct output? > if so, you can pass the value via ac97_clock option. I did retest things more toroughly today after I booted up 2.6.3-rc2. I focused on testing KDE login since this is known to break. Startup scripts (discover) loaded also i810_audio, I unloaded it. Plain bootup gave PCI: Setting latency timer of device 0000:00:1f.5 to 64 intel8x0_measure_ac97_clock: measured 49671 usecs intel8x0: clocking to 41136 and it did not work. Unloading and reloading snd-intel8x0 gave PCI: Setting latency timer of device 0000:00:1f.5 to 64 intel8x0_measure_ac97_clock: measured 49281 usecs intel8x0: clocking to 41139 and it still did not work (way too fast, probably even more than twice). Now I tried modprobe snd-intel8x0 ac97_clock=41140 It loads silently but still does not work. Now I started to suspect that loading i810_audio might screw things up. Removed the module and rebooted, no i810_audio loaded, still the same. Reproduced the problem with mplayer too. It depends on the input file bitrate! mplayer /usr/share/sounds/KDE_Startup.wav gives the same very fast sound since it's a 22 KHz mono sample. mplayer -srate 48000 /usr/share/sounds/KDE_Startup.wav works fine. Same applies to all files. So maybe it's a userspace resampling issue? I see that the hardware talks 44 KHz. -- Meelis Roos (mroos@linux.ee) ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: 2.6.3-rc1: snd_intel8x0 still too fast 2004-02-10 11:22 ` Meelis Roos @ 2004-02-10 11:43 ` Takashi Iwai 2004-02-10 12:03 ` Meelis Roos 2004-02-10 22:34 ` Peter Chubb 1 sibling, 1 reply; 15+ messages in thread From: Takashi Iwai @ 2004-02-10 11:43 UTC (permalink / raw) To: Meelis Roos; +Cc: linux-kernel At Tue, 10 Feb 2004 13:22:25 +0200 (EET), Meelis Roos wrote: > > > > Today mplayer was OK when I tested, didn't retry KDE login. But the > > > kernel is the same, I have not rebooted inbetween. > > > > weird... cpufreq is running? > > No, it's a desktop Celeron 900. > > > > Did try twice: > > > > > > intel8x0_measure_ac97_clock: measured 50040 usecs > > > intel8x0: clocking to 41146 > > > > > > intel8x0_measure_ac97_clock: measured 49395 usecs > > > intel8x0: clocking to 41145 > > > > and now you got the correct output? > > if so, you can pass the value via ac97_clock option. > > I did retest things more toroughly today after I booted up 2.6.3-rc2. I > focused on testing KDE login since this is known to break. Startup > scripts (discover) loaded also i810_audio, I unloaded it. oh never load two these modules at the same time! it can crash the system. it must be a bug of i810_audio that can coexist with ALSA driver. > Plain bootup gave > PCI: Setting latency timer of device 0000:00:1f.5 to 64 > intel8x0_measure_ac97_clock: measured 49671 usecs > intel8x0: clocking to 41136 > > and it did not work. Unloading and reloading snd-intel8x0 gave > PCI: Setting latency timer of device 0000:00:1f.5 to 64 > intel8x0_measure_ac97_clock: measured 49281 usecs > intel8x0: clocking to 41139 > > and it still did not work (way too fast, probably even more than twice). > Now I tried > modprobe snd-intel8x0 ac97_clock=41140 > It loads silently but still does not work. > > Now I started to suspect that loading i810_audio might screw things up. > Removed the module and rebooted, no i810_audio loaded, still the same. > > Reproduced the problem with mplayer too. It depends on the input file > bitrate! > > mplayer /usr/share/sounds/KDE_Startup.wav > gives the same very fast sound since it's a 22 KHz mono sample. > > mplayer -srate 48000 /usr/share/sounds/KDE_Startup.wav > works fine. Same applies to all files. then VRA of ac97 seems not working correctly. check /proc/asound/card0/codec97#0/* files for each case whether the DAC rate is set correctly. (it must be tuned with the detected ac97 clock, i.e. rate * clock / 48000). -- Takashi Iwai <tiwai@suse.de> ALSA Developer - www.alsa-project.org ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: 2.6.3-rc1: snd_intel8x0 still too fast 2004-02-10 11:43 ` Takashi Iwai @ 2004-02-10 12:03 ` Meelis Roos 2004-02-11 11:58 ` Takashi Iwai 0 siblings, 1 reply; 15+ messages in thread From: Meelis Roos @ 2004-02-10 12:03 UTC (permalink / raw) To: Takashi Iwai; +Cc: linux-kernel > > mplayer /usr/share/sounds/KDE_Startup.wav > > gives the same very fast sound since it's a 22 KHz mono sample. > > > > mplayer -srate 48000 /usr/share/sounds/KDE_Startup.wav > > works fine. Same applies to all files. > > then VRA of ac97 seems not working correctly. > check /proc/asound/card0/codec97#0/* files for each case whether the > DAC rate is set correctly. (it must be tuned with the detected ac97 > clock, i.e. rate * clock / 48000). PCM front DAC : 41133Hz PCM ADC : 48000Hz This is with "intel8x0: clocking to 41133" and playing with mplayer -srate 48000 ... PCM front DAC : 18895Hz PCM ADC : 48000Hz This is with mplayer with no options, it tells itself Opening audio decoder: [pcm] Uncompressed PCM audio decoder AUDIO: 22050 Hz, 1 ch, 16 bit (0x10), ratio: 44100->44100 (352,8 kbit) Selected audio codec: [pcm] afm:pcm (Uncompressed PCM) ========================================================================== Checking audio filter chain for 22050Hz/1ch/16bit -> 22050Hz/2ch/16bit... AF_pre: af format: 2 bps, 1 ch, 22050 hz, little endian signed int AF_pre: 22050Hz 1ch Signed 16-bit (Little-Endian) SDL: Samplerate: 22050Hz Channels: Stereo Format Signed 16-bit (Little-Endian) AO: [sdl] 22050Hz 2ch Signed 16-bit (Little-Endian) (2 bps) Building audio filter chain for 22050Hz/1ch/16bit -> 22050Hz/2ch/16bit... -- Meelis Roos (mroos@linux.ee) ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: 2.6.3-rc1: snd_intel8x0 still too fast 2004-02-10 12:03 ` Meelis Roos @ 2004-02-11 11:58 ` Takashi Iwai 2004-02-11 16:40 ` Meelis Roos 0 siblings, 1 reply; 15+ messages in thread From: Takashi Iwai @ 2004-02-11 11:58 UTC (permalink / raw) To: Meelis Roos; +Cc: linux-kernel [-- Attachment #1: Type: text/plain, Size: 921 bytes --] At Tue, 10 Feb 2004 14:03:40 +0200 (EET), Meelis Roos wrote: > > > > mplayer /usr/share/sounds/KDE_Startup.wav > > > gives the same very fast sound since it's a 22 KHz mono sample. > > > > > > mplayer -srate 48000 /usr/share/sounds/KDE_Startup.wav > > > works fine. Same applies to all files. > > > > then VRA of ac97 seems not working correctly. > > check /proc/asound/card0/codec97#0/* files for each case whether the > > DAC rate is set correctly. (it must be tuned with the detected ac97 > > clock, i.e. rate * clock / 48000). > > PCM front DAC : 41133Hz > PCM ADC : 48000Hz > > This is with "intel8x0: clocking to 41133" and playing with mplayer > -srate 48000 ... > > PCM front DAC : 18895Hz > PCM ADC : 48000Hz does the attached patch improve? if it still doesn't help, try the following: - stop ALSA once - remove /etc/asound.state - restart ALSA and tune up mixer again Takashi [-- Attachment #2: Type: text/plain, Size: 400 bytes --] --- linux/sound/pci/ac97/ac97_patch.c 9 Feb 2004 11:38:03 -0000 1.35 +++ linux/sound/pci/ac97/ac97_patch.c 11 Feb 2004 11:56:19 -0000 @@ -682,6 +682,9 @@ jack = snd_ac97_read(ac97, AC97_AD_JACK_SPDIF); snd_ac97_write_cache(ac97, AC97_AD_JACK_SPDIF, jack | 0x0300); + /* set default */ + snd_ac97_write_cache(ac97, AC97_AD_MISC, 0); + ac97->build_ops = &patch_ad1885_build_ops; return 0; } ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: 2.6.3-rc1: snd_intel8x0 still too fast 2004-02-11 11:58 ` Takashi Iwai @ 2004-02-11 16:40 ` Meelis Roos 2004-02-11 16:43 ` Takashi Iwai 0 siblings, 1 reply; 15+ messages in thread From: Meelis Roos @ 2004-02-11 16:40 UTC (permalink / raw) To: Takashi Iwai; +Cc: linux-kernel > does the attached patch improve? Unfortunately not. > if it still doesn't help, try the following: > > - stop ALSA once > - remove /etc/asound.state > - restart ALSA and tune up mixer again Did that (with the new patched driver), still the same. -- Meelis Roos (mroos@ut.ee) http://www.cs.ut.ee/~mroos/ ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: 2.6.3-rc1: snd_intel8x0 still too fast 2004-02-11 16:40 ` Meelis Roos @ 2004-02-11 16:43 ` Takashi Iwai 2004-02-11 16:49 ` Meelis Roos 0 siblings, 1 reply; 15+ messages in thread From: Takashi Iwai @ 2004-02-11 16:43 UTC (permalink / raw) To: Meelis Roos; +Cc: linux-kernel At Wed, 11 Feb 2004 18:40:36 +0200 (EET), Meelis Roos wrote: > > > does the attached patch improve? > > Unfortunately not. > > > if it still doesn't help, try the following: > > > > - stop ALSA once > > - remove /etc/asound.state > > - restart ALSA and tune up mixer again > > Did that (with the new patched driver), still the same. hmm, please show /proc/asound/card0/codec97#0/ac97#0-0 and ac97#0-0+regs files again? Takashi ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: 2.6.3-rc1: snd_intel8x0 still too fast 2004-02-11 16:43 ` Takashi Iwai @ 2004-02-11 16:49 ` Meelis Roos 2004-02-11 19:26 ` Takashi Iwai 0 siblings, 1 reply; 15+ messages in thread From: Meelis Roos @ 2004-02-11 16:49 UTC (permalink / raw) To: Takashi Iwai; +Cc: linux-kernel > hmm, please show /proc/asound/card0/codec97#0/ac97#0-0 and > ac97#0-0+regs files again? 0-0/0: Analog Devices AD1885 Capabilities : -headphone out- DAC resolution : 16-bit ADC resolution : 16-bit 3D enhancement : Analog Devices Phat Stereo Current setup Mic gain : +0dB [+0dB] POP path : pre 3D Sim. stereo : off 3D enhancement : off Loudness : off Mono output : MIX Mic select : Mic1 ADC/DAC loopback : off Extended ID : codec=0 rev=0 DSA=0 VRA Extended status : VRA PCM front DAC : 18901Hz PCM ADC : 48000Hz AD18XX configuration Unchained : 0x1000,0x0000,0x0000 Chained : 0x0000,0x0000,0x0000 (this is after playing it 22 KHz) 0:00 = 0410 0:02 = bf3f 0:04 = 1010 0:06 = 801f 0:08 = 0000 0:0a = 801e 0:0c = 801f 0:0e = 801f 0:10 = 9f1f 0:12 = 9f1f 0:14 = 9f1f 0:16 = 9f1f 0:18 = 0909 0:1a = 0000 0:1c = 0000 0:1e = 0000 0:20 = 0000 0:22 = 0000 0:24 = 0000 0:26 = 000f 0:28 = 0001 0:2a = 0001 0:2c = 49d5 0:2e = 0000 0:30 = 0000 0:32 = bb80 0:34 = 0000 0:36 = 0000 0:38 = 0000 0:3a = 0000 0:3c = 0000 0:3e = 0000 0:40 = 0000 0:42 = 0000 0:44 = 0000 0:46 = 0000 0:48 = 0000 0:4a = 0000 0:4c = 0000 0:4e = 0000 0:50 = 0000 0:52 = 0000 0:54 = 0000 0:56 = 0000 0:58 = 0000 0:5a = 0000 0:5c = 0000 0:5e = 0000 0:60 = 0000 0:62 = 0000 0:64 = 0000 0:66 = 0000 0:68 = 0000 0:6a = 0000 0:6c = 0000 0:6e = 0000 0:70 = 2000 0:72 = 0300 0:74 = 1000 0:76 = 0000 0:78 = bb80 0:7a = 49d5 0:7c = 4144 0:7e = 5360 And after playing a 48 KHz sound, it changes to PCM front DAC : 41147Hz PCM ADC : 48000Hz and regs changes to 0:2c = a0bb 0:7a = 49d5 -- Meelis Roos (mroos@linux.ee) ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: 2.6.3-rc1: snd_intel8x0 still too fast 2004-02-11 16:49 ` Meelis Roos @ 2004-02-11 19:26 ` Takashi Iwai 2004-02-12 13:40 ` Meelis Roos 0 siblings, 1 reply; 15+ messages in thread From: Takashi Iwai @ 2004-02-11 19:26 UTC (permalink / raw) To: Meelis Roos; +Cc: linux-kernel [-- Attachment #1: Type: text/plain, Size: 531 bytes --] At Wed, 11 Feb 2004 18:49:36 +0200 (EET), Meelis Roos wrote: > > > hmm, please show /proc/asound/card0/codec97#0/ac97#0-0 and > > ac97#0-0+regs files again? oops, the patch was wrong. could you try this one (and remove /etc/asound.state before starting ALSA?) also, if it still doesn't work, try to change the ADC VRA. for example, run "arecord -fS16_LE -r44100 foo.wav" once before playing 44100 samples. also, to make sure that it's a hardware problem, please avoid mono samples but use 16bit stereo samples only. Takashi [-- Attachment #2: Type: text/plain, Size: 828 bytes --] --- linux/sound/pci/ac97/ac97_patch.c 9 Feb 2004 11:38:03 -0000 1.35 +++ linux/sound/pci/ac97/ac97_patch.c 11 Feb 2004 12:08:20 -0000 1.36 @@ -652,7 +652,7 @@ static const snd_kcontrol_new_t snd_ac97_controls_ad1885[] = { AC97_SINGLE("Digital Mono Direct", AC97_AD_MISC, 11, 1, 0), - AC97_SINGLE("Digital Audio Mode", AC97_AD_MISC, 12, 1, 0), + /* AC97_SINGLE("Digital Audio Mode", AC97_AD_MISC, 12, 1, 0), */ /* seems problematic */ AC97_SINGLE("Low Power Mixer", AC97_AD_MISC, 14, 1, 0), AC97_SINGLE("Zero Fill DAC", AC97_AD_MISC, 15, 1, 0), }; @@ -682,6 +682,9 @@ jack = snd_ac97_read(ac97, AC97_AD_JACK_SPDIF); snd_ac97_write_cache(ac97, AC97_AD_JACK_SPDIF, jack | 0x0300); + /* set default */ + snd_ac97_write_cache(ac97, AC97_AD_MISC, 0x0404); + ac97->build_ops = &patch_ad1885_build_ops; return 0; } ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: 2.6.3-rc1: snd_intel8x0 still too fast 2004-02-11 19:26 ` Takashi Iwai @ 2004-02-12 13:40 ` Meelis Roos 0 siblings, 0 replies; 15+ messages in thread From: Meelis Roos @ 2004-02-12 13:40 UTC (permalink / raw) To: Takashi Iwai; +Cc: linux-kernel > oops, the patch was wrong. could you try this one (and remove > /etc/asound.state before starting ALSA?) This one works, thanks! -- Meelis Roos (mroos@linux.ee) ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: 2.6.3-rc1: snd_intel8x0 still too fast 2004-02-10 11:22 ` Meelis Roos 2004-02-10 11:43 ` Takashi Iwai @ 2004-02-10 22:34 ` Peter Chubb 1 sibling, 0 replies; 15+ messages in thread From: Peter Chubb @ 2004-02-10 22:34 UTC (permalink / raw) To: Meelis Roos; +Cc: Takashi Iwai, linux-kernel >>>>> "Meelis" == Meelis Roos <mroos@linux.ee> writes: >> > Today mplayer was OK when I tested, didn't retry KDE login. But >> the > kernel is the same, I have not rebooted inbetween. >> >> weird... cpufreq is running? Meelis> mplayer /usr/share/sounds/KDE_Startup.wav gives the same very Meelis> fast sound since it's a 22 KHz mono sample. It's a mono/stereo thing. I've seen the same problem here: the quick workaround is to convert mono to stereo before playing. -- Dr Peter Chubb http://www.gelato.unsw.edu.au peterc AT gelato.unsw.edu.au The technical we do immediately, the political takes *forever* ^ permalink raw reply [flat|nested] 15+ messages in thread
end of thread, other threads:[~2004-02-12 13:40 UTC | newest] Thread overview: 15+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2004-02-07 15:10 2.6.3-rc1: snd_intel8x0 still too fast Meelis Roos 2004-02-08 23:11 ` Bill Davidsen 2004-02-09 18:23 ` Takashi Iwai 2004-02-09 18:35 ` Meelis Roos 2004-02-09 18:46 ` Takashi Iwai 2004-02-10 11:22 ` Meelis Roos 2004-02-10 11:43 ` Takashi Iwai 2004-02-10 12:03 ` Meelis Roos 2004-02-11 11:58 ` Takashi Iwai 2004-02-11 16:40 ` Meelis Roos 2004-02-11 16:43 ` Takashi Iwai 2004-02-11 16:49 ` Meelis Roos 2004-02-11 19:26 ` Takashi Iwai 2004-02-12 13:40 ` Meelis Roos 2004-02-10 22:34 ` Peter Chubb
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®