Re: [BUG] [REGRESSION] [BISECTED] -rc1 breaks audio over HDMI for i915

[Takashi Iwai <tiwai@suse.de>]

On Mon, 22 Feb 2016 19:58:18 +0100,
Martin Kepplinger wrote:
> 
> Am 2016-02-22 um 15:12 schrieb Takashi Iwai:
> > On Mon, 22 Feb 2016 15:02:56 +0100,
> > Martin Kepplinger wrote:
> >>> And how about my questions in the previous mail?  Does
> >>> i915_audio_component_get_eld() is called and returns 0?
> >>> And is monitor_present set true or false?
> >>
> >> i915_audio_component_get_eld() returns 0 and monitor_present is 0.
> >>>
> >>> If i915_audio_component_get_eld() is called but returns zero, track
> >>> the code flow there.  It means either intel_encoder is NULL or
> >>> intel_dig_port->audio_connector is NULL.
> >>
> >> intel_dig_port->audio_connector is NULL!
> >>
> >> (when called during boot and during HDMI plugin)
> > 
> > Interesting.  The relevant code flow should be like:
> > 
> >   intel_audio_codec_enable()
> >   -> acomp->audio_ops->pin_eld_notify()
> >     -> intel_pin_eld_notify()
> >       -> check_presence_and_report()
> >         -> hdmi_present_sense()
> > 	  -> sync_eld_via_acomp()
> > 	    -> snd_hdac_acomp_get_eld()
> > 	      -> i915_audio_component_get_eld()
> > 
> > So, at first, check whether intel_dig_port in both
> > intel_audio_codec_enable() and i915_audio_component_get_eld() points
> > to the same object address.  The audio_connector must be set in
> > intel_audio_codec_enable(), thus basically it must be non-NULL at
> > i915_audio_component_get_eld(), too.
> > 
> 
> intel_dig_port is *not* the same object in these 2 places. During
> plugin, see:
> 
> [  146.934091] in intel_audio_codec_enable: intel_dig_port is
> ffff8800a1f54000
> [  146.934121] in i915_audio_component_get_eld: intel_dig_port is
> ffff880244f7d000
> 
> sorry for the slow responses. I'll try to go back that direction unless
> again someone comes up with other suggestions.

Thanks, this makes sense.  It implies that the digital port mapping is
somehow wrong.  There are three places setting dig_port_map[], one in
intel_ddi_init(), one in intel_dp_init() and another in
intel_hdmi_init().  Try to check which function creates which object
assigned to which port number, together with drm.debug=0x0e debug
messages.


Takashi