From: Takashi Iwai <tiwai@suse.de>
To: Jens Taprogge <jens.taprogge@taprogge.org>
Cc: Jaroslav Kysela <perex@perex.cz>,
alsa-devel@alsa-project.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH] ALSA: Add initial support for Thinkpad T410s HDA codec.
Date: Thu, 15 Apr 2010 09:14:00 +0200 [thread overview]
Message-ID: <s5hr5mh2nnr.wl%tiwai@suse.de> (raw)
In-Reply-To: <20100414214204.GA15425@ranger.taprogge.wh>
At Wed, 14 Apr 2010 23:42:04 +0200,
Jens Taprogge wrote:
>
> Dear ALSA Maintainers,
>
> attached please find a patch that adds support for at least the T410s
> HDA codec. Most likely it will also add support for the T410 and T510
> based models.
>
>
> The patch was derived from Ideapad support. Support for the laptop's and
> docking-station output connectors as well as the docking-station microphone
> connector and the laptops internal devices has been tested. Since it has been
> developed without a data-sheet available, support for digital outputs and the
> laptop's microphone input may well be incorrect.
>
> Microphone mute functionality is not included:
> The microphone mute button seems to be reported through thinkpad_acpi key
> 0000101b. The mute button LED seems to be wired to thinkpad_acpi led
> number 15.
>
> Please apply.
>
> Signed-off-by: Jens Taprogge <jens.taprogge@taprogge.org>
Thanks, applied now. Just one fix I made in addition:
> @@ -2292,7 +2355,7 @@ static void cxt5066_set_mic_boost(struct hda_codec *codec)
> AC_VERB_SET_AMP_GAIN_MUTE,
> AC_AMP_SET_RIGHT | AC_AMP_SET_LEFT | AC_AMP_SET_OUTPUT |
> cxt5066_analog_mic_boost.items[spec->mic_boost].index);
> - if (spec->ideapad) {
> + if (spec->ideapad | spec->thinkpad) {
This should be a logical OR.
Takashi
prev parent reply other threads:[~2010-04-15 7:14 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-04-14 21:42 Jens Taprogge
2010-04-15 7:14 ` Takashi Iwai [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=s5hr5mh2nnr.wl%tiwai@suse.de \
--to=tiwai@suse.de \
--cc=alsa-devel@alsa-project.org \
--cc=jens.taprogge@taprogge.org \
--cc=linux-kernel@vger.kernel.org \
--cc=perex@perex.cz \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®