mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
* 2.4.17smp kernel oops in nfs client
@ 2002-01-19 18:18 Steinar Hauan
  2002-01-20 18:17 ` Trond Myklebust
  0 siblings, 1 reply; 3+ messages in thread
From: Steinar Hauan @ 2002-01-19 18:18 UTC (permalink / raw)
  To: linux-kernel

[-- Attachment #1: Type: TEXT/PLAIN, Size: 400 bytes --]

hello,

  log monitoring revealed that a user processed crashed a few days
  ago and left an ooops message along with a zombie user process
  (in non-interruptible disk wait).

  the machine was still running fine with +2 extra load.

  ksymoops output attached along with other details.

regards,
--
  Steinar Hauan, dept of ChemE  --  hauan@cmu.edu
  Carnegie Mellon University, Pittsburgh PA, USA

[-- Attachment #2: Type: TEXT/PLAIN, Size: 2967 bytes --]

ksymoops 2.4.3 on i686 2.4.17.  Options used
     -v /beowulf/install/kernel/linux-2.4.17-node-p6-apollo-pro/vmlinux (specified)
     -k ksyms (specified)
     -l /proc/modules (default)
     -o /lib/modules/2.4.17/ (default)
     -m /boot/System.map-2.4.17 (default)

Jan 16 14:26:19 c1n04 kernel: invalid operand: 0000
Jan 16 14:26:19 c1n04 kernel: CPU:    1
Jan 16 14:26:19 c1n04 kernel: EIP:    0010:[clear_inode+25/160]    Not tainted
Jan 16 14:26:19 c1n04 kernel: EIP:    0010:[<c0148c89>]    Not tainted
Using defaults from ksymoops -t elf32-i386 -a i386
Jan 16 14:26:19 c1n04 kernel: EFLAGS: 00010202
Jan 16 14:26:19 c1n04 kernel: eax: 00000001   ebx: e0ff2060   ecx: e0ff2080   edx: e0ff2060
Jan 16 14:26:19 c1n04 kernel: esi: f895f320   edi: f896e880   ebp: 00000000   esp: f3ee7ee4
Jan 16 14:26:19 c1n04 kernel: ds: 0018   es: 0018   ss: 0018
Jan 16 14:26:19 c1n04 kernel: Process rm (pid: 14338, stackpage=f3ee7000)
Jan 16 14:26:19 c1n04 kernel: Stack: f7964200 f896e880 00000000 c0149651 e0ff2060 c014966a e0ff2060 e296ee20 
Jan 16 14:26:19 c1n04 kernel:        e0ff2060 e0ff2ba0 c0147ad6 e0ff2060 e0ff2060 3c45d3da e0ff2ba0 e0ff2060 
Jan 16 14:26:19 c1n04 kernel:        e296ee20 e0ff2060 e296ee20 f895e2ba e296ee20 00000001 e0ff2ba0 e296ee20 
Jan 16 14:26:19 c1n04 kernel: Call Trace: [<f896e880>] [iput+177/464] [iput+202/464] [d_delete+86/176] [<f895e2ba>] 
Jan 16 14:26:19 c1n04 kernel: Call Trace: [<f896e880>] [<c0149651>] [<c014966a>] [<c0147ad6>] [<f895e2ba>] 
Jan 16 14:26:19 c1n04 kernel:    [<f895e327>] [vfs_unlink+281/368] [lookup_hash+70/192] [sys_unlink+154/256] [system_call+51/56] 
Jan 16 14:26:19 c1n04 kernel:    [<f895e327>] [<c0140c19>] [<c013fb86>] [<c0140d0a>] [<c0106f1b>] 
Jan 16 14:26:19 c1n04 kernel: Code: 0f 0b 8b 83 08 01 00 00 a9 10 00 00 00 75 02 0f 0b a9 20 00 

>>EIP; c0148c88 <clear_inode+18/a0>   <=====
Trace; f896e880 <[nfs]nfs_sops+0/60>
Trace; f896e880 <[nfs]nfs_sops+0/60>
Trace; c0149650 <iput+b0/1d0>
Trace; c014966a <iput+ca/1d0>
Trace; c0147ad6 <d_delete+56/b0>
Trace; f895e2ba <[nfs]nfs_safe_remove+11a/140>
Trace; f895e326 <[nfs]nfs_unlink+46/60>
Trace; f895e326 <[nfs]nfs_unlink+46/60>
Trace; c0140c18 <vfs_unlink+118/170>
Trace; c013fb86 <lookup_hash+46/c0>
Trace; c0140d0a <sys_unlink+9a/100>
Trace; c0106f1a <system_call+32/38>
Code;  c0148c88 <clear_inode+18/a0>
00000000 <_EIP>:
Code;  c0148c88 <clear_inode+18/a0>   <=====
   0:   0f 0b                     ud2a      <=====
Code;  c0148c8a <clear_inode+1a/a0>
   2:   8b 83 08 01 00 00         mov    0x108(%ebx),%eax
Code;  c0148c90 <clear_inode+20/a0>
   8:   a9 10 00 00 00            test   $0x10,%eax
Code;  c0148c94 <clear_inode+24/a0>
   d:   75 02                     jne    11 <_EIP+0x11> c0148c98 <clear_inode+28/a0>
Code;  c0148c96 <clear_inode+26/a0>
   f:   0f 0b                     ud2a   
Code;  c0148c98 <clear_inode+28/a0>
  11:   a9 20 00 00 00            test   $0x20,%eax


[-- Attachment #3: Type: TEXT/PLAIN, Size: 258 bytes --]

nfs                    73692   2 (autoclean)
nfsd                   67488   8 (autoclean)
lockd                  47808   1 (autoclean) [nfs nfsd]
sunrpc                 64500   1 (autoclean) [nfs nfsd lockd]
autofs4                 8548   2 (autoclean)

[-- Attachment #4: Type: TEXT/PLAIN, Size: 631 bytes --]

If some fields are empty or look unusual you may have an old version.
Compare to the current minimal requirements in Documentation/Changes.
 
Linux c1n04 2.4.17 #1 SMP Wed Dec 26 11:56:55 EST 2001 i686 unknown
 
Gnu C                  2.96
Gnu make               3.79.1
util-linux             2.11f
mount                  2.11g
modutils               2.4.12
e2fsprogs              1.25
Linux C Library        2.2.4
Dynamic linker (ldd)   2.2.4
Procps                 2.0.7
Net-tools              1.60
Console-tools          0.3.3
Sh-utils               2.0.11
Modules Loaded         nfs nfsd lockd sunrpc autofs4

[-- Attachment #5: Type: TEXT/PLAIN, Size: 3886 bytes --]

00:00.0 Host bridge: VIA Technologies, Inc. VT8633 [Apollo Pro266] (rev 01)
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
	Latency: 8
	Region 0: Memory at d0000000 (32-bit, prefetchable) [size=16M]
	Capabilities: [a0] AGP version 2.0
		Status: RQ=31 SBA+ 64bit- FW- Rate=x1,x2
		Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>
	Capabilities: [c0] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:01.0 PCI bridge: VIA Technologies, Inc. VT8633 [Apollo Pro266 AGP] (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
	Latency: 0
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
	I/O behind bridge: 0000f000-00000fff
	Memory behind bridge: fff00000-000fffff
	Prefetchable memory behind bridge: fff00000-000fffff
	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
	Capabilities: [80] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:0a.0 VGA compatible controller: Silicon Integrated Systems [SiS] 86C326 (rev 0b) (prog-if 00 [VGA])
	Subsystem: Silicon Integrated Systems [SiS] SiS6326 GUI Accelerator
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 32 (500ns min)
	Interrupt: pin A routed to IRQ 11
	Region 0: Memory at d2000000 (32-bit, prefetchable) [size=8M]
	Region 1: Memory at d2800000 (32-bit, non-prefetchable) [size=64K]
	Region 2: I/O ports at d000 [size=128]
	Expansion ROM at <unassigned> [disabled] [size=64K]
	Capabilities: [40] Power Management version 1
		Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:0b.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139 (rev 10)
	Subsystem: Realtek Semiconductor Co., Ltd. RT8139
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 32 (8000ns min, 16000ns max)
	Interrupt: pin A routed to IRQ 10
	Region 0: I/O ports at d400 [size=256]
	Region 1: Memory at d2810000 (32-bit, non-prefetchable) [size=256]
	Expansion ROM at <unassigned> [disabled] [size=64K]

00:11.0 ISA bridge: VIA Technologies, Inc. VT8233 PCI to ISA Bridge
	Subsystem: VIA Technologies, Inc.: Unknown device 0000
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Capabilities: [c0] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:11.1 IDE interface: VIA Technologies, Inc. Bus Master IDE (rev 06) (prog-if 8a [Master SecP PriP])
	Subsystem: VIA Technologies, Inc. Bus Master IDE
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 32
	Region 4: I/O ports at d800 [size=16]
	Capabilities: [c0] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-


[-- Attachment #6: Type: TEXT/PLAIN, Size: 804 bytes --]

processor	: 0
vendor_id	: GenuineIntel
cpu family	: 6
model		: 8
model name	: Pentium III (Coppermine)
stepping	: 6
cpu MHz		: 1011.230
cache size	: 256 KB
fdiv_bug	: no
hlt_bug		: no
f00f_bug	: no
coma_bug	: no
fpu		: yes
fpu_exception	: yes
cpuid level	: 2
wp		: yes
flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr sse
bogomips	: 2018.50

processor	: 1
vendor_id	: GenuineIntel
cpu family	: 6
model		: 8
model name	: Pentium III (Coppermine)
stepping	: 6
cpu MHz		: 1011.230
cache size	: 256 KB
fdiv_bug	: no
hlt_bug		: no
f00f_bug	: no
coma_bug	: no
fpu		: yes
fpu_exception	: yes
cpuid level	: 2
wp		: yes
flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr sse
bogomips	: 2018.50


[-- Attachment #7: Type: TEXT/PLAIN, Size: 125 bytes --]

Linux version 2.4.17 (root@fs) (gcc version 2.96 20000731 (Red Hat Linux 7.1 2.96-101)) #1 SMP Wed Dec 26 11:56:55 EST 2001

^ permalink raw reply	[flat|nested] 3+ messages in thread

end of thread, other threads:[~2002-01-21 14:27 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2002-01-19 18:18 2.4.17smp kernel oops in nfs client Steinar Hauan
2002-01-20 18:17 ` Trond Myklebust
2002-01-21 14:26   ` Steinar Hauan

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®