mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Hefei <3066883572@qq.com>
To: dri-devel@lists.freedesktop.org
Cc: linux-input@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH 0/6] Add VIEWE 7" JD9365TX MIPI-DSI panel support
Date: Thu, 19 Nov 2026 10:47:59 +0800	[thread overview]
Message-ID: <tencent_31F36F1EEAC0B8EDC79A55CF772421CB1306@qq.com> (raw)

Hi,

This series adds support for the VIEWE 7KF82 7" 720x1280 in-cell MIPI-DSI
panel based on Jadard JD9365TX (2-lane video mode), plus the companion
I2C touchscreen and I2C backlight MCU used on the same FPC.

This is a different programming model from the existing JD9365DA driver
(panel-jadard-jd9365da-h3.c): page select uses 0xDE (not 0xE0), bring-up
uses 0xDF unlock, and lane config is via 0xCC rather than 0x80. The init
sequence and bindings are therefore kept separate.

Tested on Raspberry Pi 4 and Raspberry Pi 5 with a downstream dtoverlay
(not included here). A matching series is also under review for the
Raspberry Pi downstream kernel:
  https://github.com/raspberrypi/linux/pull/7633

Patches:
  1/6 dt-bindings: display: add VIEWE JD9365TX panel binding
  2/6 dt-bindings: input: add Jadard JD9365TX touchscreen binding
  3/6 dt-bindings: backlight: add VIEWE I2C backlight binding
  4/6 drm/panel: add VIEWE JD9365TX 7 inch DSI panel
  5/6 Input: add Jadard JD9365TX in-cell touchscreen driver
  6/6 backlight: add VIEWE I2C backlight driver

Signed-off-by: Hefei <3066883572@qq.com>
---
0 files changed
-- 
2.47.0


                 reply	other threads:[~2026-11-19  2:48 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=tencent_31F36F1EEAC0B8EDC79A55CF772421CB1306@qq.com \
    --to=3066883572@qq.com \
    --cc=devicetree@vger.kernel.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=linux-input@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®