* [PATCH 0/6] Add VIEWE 7" JD9365TX MIPI-DSI panel support
@ 2026-11-19 2:47 Hefei
0 siblings, 0 replies; only message in thread
From: Hefei @ 2026-11-19 2:47 UTC (permalink / raw)
To: dri-devel; +Cc: linux-input, devicetree, linux-kernel
Hi,
This series adds support for the VIEWE 7KF82 7" 720x1280 in-cell MIPI-DSI
panel based on Jadard JD9365TX (2-lane video mode), plus the companion
I2C touchscreen and I2C backlight MCU used on the same FPC.
This is a different programming model from the existing JD9365DA driver
(panel-jadard-jd9365da-h3.c): page select uses 0xDE (not 0xE0), bring-up
uses 0xDF unlock, and lane config is via 0xCC rather than 0x80. The init
sequence and bindings are therefore kept separate.
Tested on Raspberry Pi 4 and Raspberry Pi 5 with a downstream dtoverlay
(not included here). A matching series is also under review for the
Raspberry Pi downstream kernel:
https://github.com/raspberrypi/linux/pull/7633
Patches:
1/6 dt-bindings: display: add VIEWE JD9365TX panel binding
2/6 dt-bindings: input: add Jadard JD9365TX touchscreen binding
3/6 dt-bindings: backlight: add VIEWE I2C backlight binding
4/6 drm/panel: add VIEWE JD9365TX 7 inch DSI panel
5/6 Input: add Jadard JD9365TX in-cell touchscreen driver
6/6 backlight: add VIEWE I2C backlight driver
Signed-off-by: Hefei <3066883572@qq.com>
---
0 files changed
--
2.47.0
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2026-11-19 2:48 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2026-11-19 2:47 [PATCH 0/6] Add VIEWE 7" JD9365TX MIPI-DSI panel support Hefei
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®