* [PATCH v5] HID: i2c-hid: Refactor _DSM helper and add i2c-hid-acpi-prp0001 driver
[not found] <20260609110608.3F4C21F00898@smtp.kernel.org>
@ 2026-06-12 10:38 ` 谢致邦 (XIE Zhibang)
2026-06-24 17:46 ` [PATCH v6] " 谢致邦 (XIE Zhibang)
0 siblings, 1 reply; 6+ messages in thread
From: 谢致邦 (XIE Zhibang) @ 2026-06-12 10:38 UTC (permalink / raw)
To: linux-input, hansg, dmitry.torokhov, bentiss, sashiko-bot
Cc: sashiko-reviews, 谢致邦 (XIE Zhibang),
Jiri Kosina, Mario Limonciello (AMD),
Douglas Anderson, linux-kernel
Move the _DSM call that gets the HID descriptor address from
i2c-hid-acpi.c into i2c-hid-acpi.h as a static inline so both the ACPI
and the new PRP0001 driver can use it. While refactoring, move the
blacklist check and the _DSM call to the top of probe() to avoid a
pointless alloc when the device is blacklisted or does not implement the
_DSM.
Some devices, for example the Lenovo KaiTian N60d and Inspur CP300L3,
are declared with _HID "PRP0001" and _DSD compatible "hid-over-i2c" but
lack "hid-descr-addr" from the _DSD and provide the HID descriptor
address only through an ACPI _DSM. The OF driver fails to probe them
because it requires hid-descr-addr. Add a new driver that handles these
devices by calling the shared _DSM helper.
Fixes: b33752c30023 ("HID: i2c-hid: Reorganize so ACPI and OF are separate modules")
Signed-off-by: 谢致邦 (XIE Zhibang) <Yeking@Red54.com>
---
v2: Name the unused parameter and document why
acpi_device_fix_up_power() is skipped.
v3: Add a dev_warn() asking users to contact vendors for firmware
updates, and use existing locals in devm_kzalloc() and
acpi_device_fix_up_power().
v4: Double the power-up delay from 250ms to 500ms.
v5: Document why of_match_ptr() on the of_match_table is safe when
CONFIG_OF=n.
drivers/hid/i2c-hid/Kconfig | 18 ++++
drivers/hid/i2c-hid/Makefile | 1 +
drivers/hid/i2c-hid/i2c-hid-acpi-prp0001.c | 104 +++++++++++++++++++++
drivers/hid/i2c-hid/i2c-hid-acpi.c | 52 +++--------
drivers/hid/i2c-hid/i2c-hid-acpi.h | 32 +++++++
5 files changed, 169 insertions(+), 38 deletions(-)
create mode 100644 drivers/hid/i2c-hid/i2c-hid-acpi-prp0001.c
create mode 100644 drivers/hid/i2c-hid/i2c-hid-acpi.h
diff --git a/drivers/hid/i2c-hid/Kconfig b/drivers/hid/i2c-hid/Kconfig
index e8d51f410cc1..7db8b2abff78 100644
--- a/drivers/hid/i2c-hid/Kconfig
+++ b/drivers/hid/i2c-hid/Kconfig
@@ -22,6 +22,24 @@ config I2C_HID_ACPI
will be called i2c-hid-acpi. It will also build/depend on the
module i2c-hid.
+config I2C_HID_ACPI_PRP0001
+ tristate "Driver for PRP0001 devices missing hid-descr-addr"
+ depends on ACPI
+ depends on DRM || !DRM
+ select I2C_HID_CORE
+ help
+ Say Y here if you want support for I2C HID touchpads that
+ are declared with _HID "PRP0001" and _DSD compatible
+ "hid-over-i2c" but lack the "hid-descr-addr" property from
+ the _DSD. The HID descriptor address is instead provided
+ through an ACPI _DSM. Known affected devices include the
+ Lenovo KaiTian N60d and Inspur CP300L3.
+
+ If unsure, say N.
+
+ This support is also available as a module. If so, the
+ module will be called i2c-hid-acpi-prp0001.
+
config I2C_HID_OF
tristate "HID over I2C transport layer Open Firmware driver"
# No "depends on OF" because this can also be used for manually
diff --git a/drivers/hid/i2c-hid/Makefile b/drivers/hid/i2c-hid/Makefile
index 55bd5e0f35af..da420c1a8ec6 100644
--- a/drivers/hid/i2c-hid/Makefile
+++ b/drivers/hid/i2c-hid/Makefile
@@ -9,6 +9,7 @@ i2c-hid-objs = i2c-hid-core.o
i2c-hid-$(CONFIG_DMI) += i2c-hid-dmi-quirks.o
obj-$(CONFIG_I2C_HID_ACPI) += i2c-hid-acpi.o
+obj-$(CONFIG_I2C_HID_ACPI_PRP0001) += i2c-hid-acpi-prp0001.o
obj-$(CONFIG_I2C_HID_OF) += i2c-hid-of.o
obj-$(CONFIG_I2C_HID_OF_ELAN) += i2c-hid-of-elan.o
obj-$(CONFIG_I2C_HID_OF_GOODIX) += i2c-hid-of-goodix.o
diff --git a/drivers/hid/i2c-hid/i2c-hid-acpi-prp0001.c b/drivers/hid/i2c-hid/i2c-hid-acpi-prp0001.c
new file mode 100644
index 000000000000..05469d220c39
--- /dev/null
+++ b/drivers/hid/i2c-hid/i2c-hid-acpi-prp0001.c
@@ -0,0 +1,104 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * HID over I2C driver for PRP0001 devices missing hid-descr-addr
+ *
+ * Some devices, for example the Lenovo KaiTian N60d and Inspur CP300L3, use
+ * _HID "PRP0001" with _DSD compatible "hid-over-i2c" but lack "hid-descr-addr"
+ * from the _DSD. The HID descriptor address is provided only through an ACPI
+ * _DSM. The TPD0 node in the DSDT shows _DSM Function 1 returning 0x20.
+ *
+ * Copyright (C) 2026 谢致邦 (XIE Zhibang) <Yeking@Red54.com>
+ */
+
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/of.h>
+
+#include "i2c-hid.h"
+#include "i2c-hid-acpi.h"
+
+static int i2c_hid_acpi_prp0001_power_up(struct i2chid_ops *ops)
+{
+ /* give the device time to power up */
+ msleep(500);
+ return 0;
+}
+
+static struct i2chid_ops i2c_hid_acpi_prp0001_ops = {
+ .power_up = i2c_hid_acpi_prp0001_power_up,
+ /*
+ * No .restore_sequence needed: the _DSM on these devices returns a
+ * constant (0x20) with no side effects, unlike some PNP0C50 _DSM
+ * implementations that switch the hardware between PS/2 and I2C modes.
+ */
+};
+
+static int i2c_hid_acpi_prp0001_probe(struct i2c_client *client)
+{
+ struct device *dev = &client->dev;
+ struct acpi_device *adev;
+ u16 hid_descriptor_address;
+ int ret;
+
+ /* If hid-descr-addr is present, let i2c-hid-of handle it */
+ if (device_property_present(dev, "hid-descr-addr"))
+ return -ENODEV;
+
+ adev = ACPI_COMPANION(dev);
+ if (!adev)
+ return -ENODEV;
+
+ ret = i2c_hid_acpi_get_descriptor(adev);
+ if (ret < 0)
+ return ret;
+ dev_warn(dev,
+ "hid-descr-addr device property NOT found, using ACPI _DSM fallback. Contact vendor for firmware update!\n");
+ hid_descriptor_address = ret;
+
+ /*
+ * No acpi_device_fix_up_power() needed: TPD0 has no _PS0, _PS3, _PSC
+ * or _PRx methods and follows I2C bus power.
+ */
+ return i2c_hid_core_probe(client, &i2c_hid_acpi_prp0001_ops,
+ hid_descriptor_address, 0);
+}
+
+static const struct of_device_id i2c_hid_acpi_prp0001_of_match[] = {
+ { .compatible = "hid-over-i2c" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, i2c_hid_acpi_prp0001_of_match);
+
+static const struct i2c_device_id i2c_hid_acpi_prp0001_id[] = {
+ { .name = "hid-over-i2c" },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, i2c_hid_acpi_prp0001_id);
+
+static struct i2c_driver i2c_hid_acpi_prp0001_driver = {
+ .driver = {
+ .name = "i2c_hid_acpi_prp0001",
+ .pm = &i2c_hid_core_pm,
+ .probe_type = PROBE_PREFER_ASYNCHRONOUS,
+ /*
+ * of_match_ptr() makes this NULL when CONFIG_OF=n, but that's
+ * fine: the I2C id_table with "hid-over-i2c" handles matching
+ * via client->name (set by acpi_set_modalias() from the _DSD
+ * compatible property).
+ */
+ .of_match_table = of_match_ptr(i2c_hid_acpi_prp0001_of_match),
+ },
+
+ .probe = i2c_hid_acpi_prp0001_probe,
+ .remove = i2c_hid_core_remove,
+ .shutdown = i2c_hid_core_shutdown,
+ .id_table = i2c_hid_acpi_prp0001_id,
+};
+
+module_i2c_driver(i2c_hid_acpi_prp0001_driver);
+
+MODULE_DESCRIPTION("HID over I2C driver for PRP0001 devices missing hid-descr-addr");
+MODULE_AUTHOR("谢致邦 (XIE Zhibang) <Yeking@Red54.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/hid/i2c-hid/i2c-hid-acpi.c b/drivers/hid/i2c-hid/i2c-hid-acpi.c
index abd700a101f4..13f977d6aab6 100644
--- a/drivers/hid/i2c-hid/i2c-hid-acpi.c
+++ b/drivers/hid/i2c-hid/i2c-hid-acpi.c
@@ -25,9 +25,9 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pm.h>
-#include <linux/uuid.h>
#include "i2c-hid.h"
+#include "i2c-hid-acpi.h"
struct i2c_hid_acpi {
struct i2chid_ops ops;
@@ -48,39 +48,11 @@ static const struct acpi_device_id i2c_hid_acpi_blacklist[] = {
{ }
};
-/* HID I²C Device: 3cdff6f7-4267-4555-ad05-b30a3d8938de */
-static guid_t i2c_hid_guid =
- GUID_INIT(0x3CDFF6F7, 0x4267, 0x4555,
- 0xAD, 0x05, 0xB3, 0x0A, 0x3D, 0x89, 0x38, 0xDE);
-
-static int i2c_hid_acpi_get_descriptor(struct i2c_hid_acpi *ihid_acpi)
-{
- struct acpi_device *adev = ihid_acpi->adev;
- acpi_handle handle = acpi_device_handle(adev);
- union acpi_object *obj;
- u16 hid_descriptor_address;
-
- if (acpi_match_device_ids(adev, i2c_hid_acpi_blacklist) == 0)
- return -ENODEV;
-
- obj = acpi_evaluate_dsm_typed(handle, &i2c_hid_guid, 1, 1, NULL,
- ACPI_TYPE_INTEGER);
- if (!obj) {
- acpi_handle_err(handle, "Error _DSM call to get HID descriptor address failed\n");
- return -ENODEV;
- }
-
- hid_descriptor_address = obj->integer.value;
- ACPI_FREE(obj);
-
- return hid_descriptor_address;
-}
-
static void i2c_hid_acpi_restore_sequence(struct i2chid_ops *ops)
{
struct i2c_hid_acpi *ihid_acpi = container_of(ops, struct i2c_hid_acpi, ops);
- i2c_hid_acpi_get_descriptor(ihid_acpi);
+ i2c_hid_acpi_get_descriptor(ihid_acpi->adev);
}
static void i2c_hid_acpi_shutdown_tail(struct i2chid_ops *ops)
@@ -93,24 +65,28 @@ static void i2c_hid_acpi_shutdown_tail(struct i2chid_ops *ops)
static int i2c_hid_acpi_probe(struct i2c_client *client)
{
struct device *dev = &client->dev;
+ struct acpi_device *adev = ACPI_COMPANION(dev);
struct i2c_hid_acpi *ihid_acpi;
u16 hid_descriptor_address;
int ret;
- ihid_acpi = devm_kzalloc(&client->dev, sizeof(*ihid_acpi), GFP_KERNEL);
+ if (acpi_match_device_ids(adev, i2c_hid_acpi_blacklist) == 0)
+ return -ENODEV;
+
+ ret = i2c_hid_acpi_get_descriptor(adev);
+ if (ret < 0)
+ return ret;
+ hid_descriptor_address = ret;
+
+ ihid_acpi = devm_kzalloc(dev, sizeof(*ihid_acpi), GFP_KERNEL);
if (!ihid_acpi)
return -ENOMEM;
- ihid_acpi->adev = ACPI_COMPANION(dev);
+ ihid_acpi->adev = adev;
ihid_acpi->ops.shutdown_tail = i2c_hid_acpi_shutdown_tail;
ihid_acpi->ops.restore_sequence = i2c_hid_acpi_restore_sequence;
- ret = i2c_hid_acpi_get_descriptor(ihid_acpi);
- if (ret < 0)
- return ret;
- hid_descriptor_address = ret;
-
- acpi_device_fix_up_power(ihid_acpi->adev);
+ acpi_device_fix_up_power(adev);
return i2c_hid_core_probe(client, &ihid_acpi->ops,
hid_descriptor_address, 0);
diff --git a/drivers/hid/i2c-hid/i2c-hid-acpi.h b/drivers/hid/i2c-hid/i2c-hid-acpi.h
new file mode 100644
index 000000000000..8cebbeebcc23
--- /dev/null
+++ b/drivers/hid/i2c-hid/i2c-hid-acpi.h
@@ -0,0 +1,32 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#ifndef _I2C_HID_ACPI_H
+#define _I2C_HID_ACPI_H
+
+#include <linux/acpi.h>
+#include <linux/uuid.h>
+
+static inline int i2c_hid_acpi_get_descriptor(struct acpi_device *adev)
+{
+ /* HID I²C Device: 3cdff6f7-4267-4555-ad05-b30a3d8938de */
+ static const guid_t i2c_hid_guid =
+ GUID_INIT(0x3CDFF6F7, 0x4267, 0x4555,
+ 0xAD, 0x05, 0xB3, 0x0A, 0x3D, 0x89, 0x38, 0xDE);
+
+ acpi_handle handle = acpi_device_handle(adev);
+ union acpi_object *obj;
+ u16 addr;
+
+ obj = acpi_evaluate_dsm_typed(handle, &i2c_hid_guid,
+ 1, 1, NULL, ACPI_TYPE_INTEGER);
+ if (!obj) {
+ acpi_handle_err(handle, "Error _DSM call to get HID descriptor address failed\n");
+ return -ENODEV;
+ }
+
+ addr = obj->integer.value;
+ ACPI_FREE(obj);
+ return addr;
+}
+
+#endif
--
2.52.0
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH v6] HID: i2c-hid: Refactor _DSM helper and add i2c-hid-acpi-prp0001 driver
2026-06-12 10:38 ` [PATCH v5] HID: i2c-hid: Refactor _DSM helper and add i2c-hid-acpi-prp0001 driver 谢致邦 (XIE Zhibang)
@ 2026-06-24 17:46 ` 谢致邦 (XIE Zhibang)
2026-06-29 9:04 ` Jiri Kosina
0 siblings, 1 reply; 6+ messages in thread
From: 谢致邦 (XIE Zhibang) @ 2026-06-24 17:46 UTC (permalink / raw)
To: linux-input, hansg, dmitry.torokhov, bentiss, yeking
Cc: dianders, jikos, linux-kernel, sashiko-bot, sashiko-reviews,
superm1, 谢致邦 (XIE Zhibang)
Move the _DSM call that gets the HID descriptor address from
i2c-hid-acpi.c into i2c-hid-acpi.h as a static inline so both the ACPI
and the new PRP0001 driver can use it. While refactoring, move the
blacklist check and the _DSM call to the top of probe() to avoid a
pointless alloc when the device is blacklisted or does not implement the
_DSM.
Some devices, for example the Lenovo KaiTian N60d and Inspur CP300L3,
are declared with _HID "PRP0001" and _DSD compatible "hid-over-i2c" but
lack "hid-descr-addr" from the _DSD and provide the HID descriptor
address only through an ACPI _DSM. The OF driver fails to probe them
because it requires hid-descr-addr. Add a new driver that handles these
devices by calling the shared _DSM helper.
Fixes: b33752c30023 ("HID: i2c-hid: Reorganize so ACPI and OF are separate modules")
Signed-off-by: 谢致邦 (XIE Zhibang) <Yeking@Red54.com>
---
v2: Name the unused parameter and document why
acpi_device_fix_up_power() is skipped.
v3: Add a dev_warn() asking users to contact vendors for firmware
updates, and use existing locals in devm_kzalloc() and
acpi_device_fix_up_power().
v4: Double the power-up delay from 250ms to 500ms.
v5: Document why of_match_ptr() on the of_match_table is safe when
CONFIG_OF=n.
v6: Increase power-up delay from 500ms to 750ms. During cold boot on low
battery, 500ms causes non-fatal I2C transfer errors (-ENXIO). 750ms
fixes them.
drivers/hid/i2c-hid/Kconfig | 18 ++++
drivers/hid/i2c-hid/Makefile | 1 +
drivers/hid/i2c-hid/i2c-hid-acpi-prp0001.c | 104 +++++++++++++++++++++
drivers/hid/i2c-hid/i2c-hid-acpi.c | 52 +++--------
drivers/hid/i2c-hid/i2c-hid-acpi.h | 32 +++++++
5 files changed, 169 insertions(+), 38 deletions(-)
create mode 100644 drivers/hid/i2c-hid/i2c-hid-acpi-prp0001.c
create mode 100644 drivers/hid/i2c-hid/i2c-hid-acpi.h
diff --git a/drivers/hid/i2c-hid/Kconfig b/drivers/hid/i2c-hid/Kconfig
index e8d51f410cc1..7db8b2abff78 100644
--- a/drivers/hid/i2c-hid/Kconfig
+++ b/drivers/hid/i2c-hid/Kconfig
@@ -22,6 +22,24 @@ config I2C_HID_ACPI
will be called i2c-hid-acpi. It will also build/depend on the
module i2c-hid.
+config I2C_HID_ACPI_PRP0001
+ tristate "Driver for PRP0001 devices missing hid-descr-addr"
+ depends on ACPI
+ depends on DRM || !DRM
+ select I2C_HID_CORE
+ help
+ Say Y here if you want support for I2C HID touchpads that
+ are declared with _HID "PRP0001" and _DSD compatible
+ "hid-over-i2c" but lack the "hid-descr-addr" property from
+ the _DSD. The HID descriptor address is instead provided
+ through an ACPI _DSM. Known affected devices include the
+ Lenovo KaiTian N60d and Inspur CP300L3.
+
+ If unsure, say N.
+
+ This support is also available as a module. If so, the
+ module will be called i2c-hid-acpi-prp0001.
+
config I2C_HID_OF
tristate "HID over I2C transport layer Open Firmware driver"
# No "depends on OF" because this can also be used for manually
diff --git a/drivers/hid/i2c-hid/Makefile b/drivers/hid/i2c-hid/Makefile
index 55bd5e0f35af..da420c1a8ec6 100644
--- a/drivers/hid/i2c-hid/Makefile
+++ b/drivers/hid/i2c-hid/Makefile
@@ -9,6 +9,7 @@ i2c-hid-objs = i2c-hid-core.o
i2c-hid-$(CONFIG_DMI) += i2c-hid-dmi-quirks.o
obj-$(CONFIG_I2C_HID_ACPI) += i2c-hid-acpi.o
+obj-$(CONFIG_I2C_HID_ACPI_PRP0001) += i2c-hid-acpi-prp0001.o
obj-$(CONFIG_I2C_HID_OF) += i2c-hid-of.o
obj-$(CONFIG_I2C_HID_OF_ELAN) += i2c-hid-of-elan.o
obj-$(CONFIG_I2C_HID_OF_GOODIX) += i2c-hid-of-goodix.o
diff --git a/drivers/hid/i2c-hid/i2c-hid-acpi-prp0001.c b/drivers/hid/i2c-hid/i2c-hid-acpi-prp0001.c
new file mode 100644
index 000000000000..d2cf4714ae7f
--- /dev/null
+++ b/drivers/hid/i2c-hid/i2c-hid-acpi-prp0001.c
@@ -0,0 +1,104 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * HID over I2C driver for PRP0001 devices missing hid-descr-addr
+ *
+ * Some devices, for example the Lenovo KaiTian N60d and Inspur CP300L3, use
+ * _HID "PRP0001" with _DSD compatible "hid-over-i2c" but lack "hid-descr-addr"
+ * from the _DSD. The HID descriptor address is provided only through an ACPI
+ * _DSM. The TPD0 node in the DSDT shows _DSM Function 1 returning 0x20.
+ *
+ * Copyright (C) 2026 谢致邦 (XIE Zhibang) <Yeking@Red54.com>
+ */
+
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/of.h>
+
+#include "i2c-hid.h"
+#include "i2c-hid-acpi.h"
+
+static int i2c_hid_acpi_prp0001_power_up(struct i2chid_ops *ops)
+{
+ /* give the device time to power up */
+ msleep(750);
+ return 0;
+}
+
+static struct i2chid_ops i2c_hid_acpi_prp0001_ops = {
+ .power_up = i2c_hid_acpi_prp0001_power_up,
+ /*
+ * No .restore_sequence needed: the _DSM on these devices returns a
+ * constant (0x20) with no side effects, unlike some PNP0C50 _DSM
+ * implementations that switch the hardware between PS/2 and I2C modes.
+ */
+};
+
+static int i2c_hid_acpi_prp0001_probe(struct i2c_client *client)
+{
+ struct device *dev = &client->dev;
+ struct acpi_device *adev;
+ u16 hid_descriptor_address;
+ int ret;
+
+ /* If hid-descr-addr is present, let i2c-hid-of handle it */
+ if (device_property_present(dev, "hid-descr-addr"))
+ return -ENODEV;
+
+ adev = ACPI_COMPANION(dev);
+ if (!adev)
+ return -ENODEV;
+
+ ret = i2c_hid_acpi_get_descriptor(adev);
+ if (ret < 0)
+ return ret;
+ dev_warn(dev,
+ "hid-descr-addr device property NOT found, using ACPI _DSM fallback. Contact vendor for firmware update!\n");
+ hid_descriptor_address = ret;
+
+ /*
+ * No acpi_device_fix_up_power() needed: TPD0 has no _PS0, _PS3, _PSC
+ * or _PRx methods and follows I2C bus power.
+ */
+ return i2c_hid_core_probe(client, &i2c_hid_acpi_prp0001_ops,
+ hid_descriptor_address, 0);
+}
+
+static const struct of_device_id i2c_hid_acpi_prp0001_of_match[] = {
+ { .compatible = "hid-over-i2c" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, i2c_hid_acpi_prp0001_of_match);
+
+static const struct i2c_device_id i2c_hid_acpi_prp0001_id[] = {
+ { .name = "hid-over-i2c" },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, i2c_hid_acpi_prp0001_id);
+
+static struct i2c_driver i2c_hid_acpi_prp0001_driver = {
+ .driver = {
+ .name = "i2c_hid_acpi_prp0001",
+ .pm = &i2c_hid_core_pm,
+ .probe_type = PROBE_PREFER_ASYNCHRONOUS,
+ /*
+ * of_match_ptr() makes this NULL when CONFIG_OF=n, but that's
+ * fine: the I2C id_table with "hid-over-i2c" handles matching
+ * via client->name (set by acpi_set_modalias() from the _DSD
+ * compatible property).
+ */
+ .of_match_table = of_match_ptr(i2c_hid_acpi_prp0001_of_match),
+ },
+
+ .probe = i2c_hid_acpi_prp0001_probe,
+ .remove = i2c_hid_core_remove,
+ .shutdown = i2c_hid_core_shutdown,
+ .id_table = i2c_hid_acpi_prp0001_id,
+};
+
+module_i2c_driver(i2c_hid_acpi_prp0001_driver);
+
+MODULE_DESCRIPTION("HID over I2C driver for PRP0001 devices missing hid-descr-addr");
+MODULE_AUTHOR("谢致邦 (XIE Zhibang) <Yeking@Red54.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/hid/i2c-hid/i2c-hid-acpi.c b/drivers/hid/i2c-hid/i2c-hid-acpi.c
index abd700a101f4..13f977d6aab6 100644
--- a/drivers/hid/i2c-hid/i2c-hid-acpi.c
+++ b/drivers/hid/i2c-hid/i2c-hid-acpi.c
@@ -25,9 +25,9 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pm.h>
-#include <linux/uuid.h>
#include "i2c-hid.h"
+#include "i2c-hid-acpi.h"
struct i2c_hid_acpi {
struct i2chid_ops ops;
@@ -48,39 +48,11 @@ static const struct acpi_device_id i2c_hid_acpi_blacklist[] = {
{ }
};
-/* HID I²C Device: 3cdff6f7-4267-4555-ad05-b30a3d8938de */
-static guid_t i2c_hid_guid =
- GUID_INIT(0x3CDFF6F7, 0x4267, 0x4555,
- 0xAD, 0x05, 0xB3, 0x0A, 0x3D, 0x89, 0x38, 0xDE);
-
-static int i2c_hid_acpi_get_descriptor(struct i2c_hid_acpi *ihid_acpi)
-{
- struct acpi_device *adev = ihid_acpi->adev;
- acpi_handle handle = acpi_device_handle(adev);
- union acpi_object *obj;
- u16 hid_descriptor_address;
-
- if (acpi_match_device_ids(adev, i2c_hid_acpi_blacklist) == 0)
- return -ENODEV;
-
- obj = acpi_evaluate_dsm_typed(handle, &i2c_hid_guid, 1, 1, NULL,
- ACPI_TYPE_INTEGER);
- if (!obj) {
- acpi_handle_err(handle, "Error _DSM call to get HID descriptor address failed\n");
- return -ENODEV;
- }
-
- hid_descriptor_address = obj->integer.value;
- ACPI_FREE(obj);
-
- return hid_descriptor_address;
-}
-
static void i2c_hid_acpi_restore_sequence(struct i2chid_ops *ops)
{
struct i2c_hid_acpi *ihid_acpi = container_of(ops, struct i2c_hid_acpi, ops);
- i2c_hid_acpi_get_descriptor(ihid_acpi);
+ i2c_hid_acpi_get_descriptor(ihid_acpi->adev);
}
static void i2c_hid_acpi_shutdown_tail(struct i2chid_ops *ops)
@@ -93,24 +65,28 @@ static void i2c_hid_acpi_shutdown_tail(struct i2chid_ops *ops)
static int i2c_hid_acpi_probe(struct i2c_client *client)
{
struct device *dev = &client->dev;
+ struct acpi_device *adev = ACPI_COMPANION(dev);
struct i2c_hid_acpi *ihid_acpi;
u16 hid_descriptor_address;
int ret;
- ihid_acpi = devm_kzalloc(&client->dev, sizeof(*ihid_acpi), GFP_KERNEL);
+ if (acpi_match_device_ids(adev, i2c_hid_acpi_blacklist) == 0)
+ return -ENODEV;
+
+ ret = i2c_hid_acpi_get_descriptor(adev);
+ if (ret < 0)
+ return ret;
+ hid_descriptor_address = ret;
+
+ ihid_acpi = devm_kzalloc(dev, sizeof(*ihid_acpi), GFP_KERNEL);
if (!ihid_acpi)
return -ENOMEM;
- ihid_acpi->adev = ACPI_COMPANION(dev);
+ ihid_acpi->adev = adev;
ihid_acpi->ops.shutdown_tail = i2c_hid_acpi_shutdown_tail;
ihid_acpi->ops.restore_sequence = i2c_hid_acpi_restore_sequence;
- ret = i2c_hid_acpi_get_descriptor(ihid_acpi);
- if (ret < 0)
- return ret;
- hid_descriptor_address = ret;
-
- acpi_device_fix_up_power(ihid_acpi->adev);
+ acpi_device_fix_up_power(adev);
return i2c_hid_core_probe(client, &ihid_acpi->ops,
hid_descriptor_address, 0);
diff --git a/drivers/hid/i2c-hid/i2c-hid-acpi.h b/drivers/hid/i2c-hid/i2c-hid-acpi.h
new file mode 100644
index 000000000000..8cebbeebcc23
--- /dev/null
+++ b/drivers/hid/i2c-hid/i2c-hid-acpi.h
@@ -0,0 +1,32 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#ifndef _I2C_HID_ACPI_H
+#define _I2C_HID_ACPI_H
+
+#include <linux/acpi.h>
+#include <linux/uuid.h>
+
+static inline int i2c_hid_acpi_get_descriptor(struct acpi_device *adev)
+{
+ /* HID I²C Device: 3cdff6f7-4267-4555-ad05-b30a3d8938de */
+ static const guid_t i2c_hid_guid =
+ GUID_INIT(0x3CDFF6F7, 0x4267, 0x4555,
+ 0xAD, 0x05, 0xB3, 0x0A, 0x3D, 0x89, 0x38, 0xDE);
+
+ acpi_handle handle = acpi_device_handle(adev);
+ union acpi_object *obj;
+ u16 addr;
+
+ obj = acpi_evaluate_dsm_typed(handle, &i2c_hid_guid,
+ 1, 1, NULL, ACPI_TYPE_INTEGER);
+ if (!obj) {
+ acpi_handle_err(handle, "Error _DSM call to get HID descriptor address failed\n");
+ return -ENODEV;
+ }
+
+ addr = obj->integer.value;
+ ACPI_FREE(obj);
+ return addr;
+}
+
+#endif
--
2.52.0
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH v6] HID: i2c-hid: Refactor _DSM helper and add i2c-hid-acpi-prp0001 driver
2026-06-24 17:46 ` [PATCH v6] " 谢致邦 (XIE Zhibang)
@ 2026-06-29 9:04 ` Jiri Kosina
2026-06-30 5:04 ` [PATCH v7] " 谢致邦 (XIE Zhibang)
0 siblings, 1 reply; 6+ messages in thread
From: Jiri Kosina @ 2026-06-29 9:04 UTC (permalink / raw)
To: 谢致邦 (XIE Zhibang)
Cc: linux-input, hansg, dmitry.torokhov, bentiss, dianders,
linux-kernel, sashiko-bot, sashiko-reviews, superm1
On Wed, 24 Jun 2026, 谢致邦 (XIE Zhibang) wrote:
> Move the _DSM call that gets the HID descriptor address from
> i2c-hid-acpi.c into i2c-hid-acpi.h as a static inline so both the ACPI
> and the new PRP0001 driver can use it. While refactoring, move the
> blacklist check and the _DSM call to the top of probe() to avoid a
> pointless alloc when the device is blacklisted or does not implement the
> _DSM.
>
> Some devices, for example the Lenovo KaiTian N60d and Inspur CP300L3,
> are declared with _HID "PRP0001" and _DSD compatible "hid-over-i2c" but
> lack "hid-descr-addr" from the _DSD and provide the HID descriptor
> address only through an ACPI _DSM. The OF driver fails to probe them
> because it requires hid-descr-addr. Add a new driver that handles these
> devices by calling the shared _DSM helper.
>
> Fixes: b33752c30023 ("HID: i2c-hid: Reorganize so ACPI and OF are separate modules")
> Signed-off-by: 谢致邦 (XIE Zhibang) <Yeking@Red54.com>
> ---
> v2: Name the unused parameter and document why
> acpi_device_fix_up_power() is skipped.
> v3: Add a dev_warn() asking users to contact vendors for firmware
> updates, and use existing locals in devm_kzalloc() and
> acpi_device_fix_up_power().
> v4: Double the power-up delay from 250ms to 500ms.
> v5: Document why of_match_ptr() on the of_match_table is safe when
> CONFIG_OF=n.
> v6: Increase power-up delay from 500ms to 750ms. During cold boot on low
> battery, 500ms causes non-fatal I2C transfer errors (-ENXIO). 750ms
> fixes them.
Thanks for all the effort you've put into this.
[ ... snip ... ]
> --- a/drivers/hid/i2c-hid/Kconfig
> +++ b/drivers/hid/i2c-hid/Kconfig
> @@ -22,6 +22,24 @@ config I2C_HID_ACPI
> will be called i2c-hid-acpi. It will also build/depend on the
> module i2c-hid.
>
> +config I2C_HID_ACPI_PRP0001
> + tristate "Driver for PRP0001 devices missing hid-descr-addr"
> + depends on ACPI
> + depends on DRM || !DRM
> + select I2C_HID_CORE
> + help
> + Say Y here if you want support for I2C HID touchpads that
> + are declared with _HID "PRP0001" and _DSD compatible
> + "hid-over-i2c" but lack the "hid-descr-addr" property from
> + the _DSD. The HID descriptor address is instead provided
> + through an ACPI _DSM. Known affected devices include the
> + Lenovo KaiTian N60d and Inspur CP300L3.
> +
> + If unsure, say N.
> +
> + This support is also available as a module. If so, the
> + module will be called i2c-hid-acpi-prp0001.
The only question I have -- do we really want to have this build-time
selectable by the endusers? It's unlikely that the description will make
sense to most of the people, being very low-level technical, and they'd be
unsure what to chose.
Is there a reason not to include it alwyas under the I2C_HID_CORE
umbrella?
Thanks,
--
Jiri Kosina
SUSE Labs
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH v7] HID: i2c-hid: Refactor _DSM helper and add i2c-hid-acpi-prp0001 driver
2026-06-29 9:04 ` Jiri Kosina
@ 2026-06-30 5:04 ` 谢致邦 (XIE Zhibang)
2026-07-27 13:22 ` 谢致邦 (XIE Zhibang)
2026-08-03 17:31 ` Jiri Kosina
0 siblings, 2 replies; 6+ messages in thread
From: 谢致邦 (XIE Zhibang) @ 2026-06-30 5:04 UTC (permalink / raw)
To: linux-input, hansg, dmitry.torokhov, bentiss, jikos
Cc: Yeking, dianders, linux-kernel, sashiko-bot, sashiko-reviews, superm1
Move the _DSM call that gets the HID descriptor address from
i2c-hid-acpi.c into i2c-hid-acpi.h as a static inline so both the ACPI
and the new PRP0001 driver can use it. While refactoring, move the
blacklist check and the _DSM call to the top of probe() to avoid a
pointless alloc when the device is blacklisted or does not implement the
_DSM.
Some devices, for example the Lenovo KaiTian N60d and Inspur CP300L3,
are declared with _HID "PRP0001" and _DSD compatible "hid-over-i2c" but
lack "hid-descr-addr" from the _DSD and provide the HID descriptor
address only through an ACPI _DSM. The OF driver fails to probe them
because it requires hid-descr-addr. Add a new driver that handles these
devices by calling the shared _DSM helper.
Link: https://lore.kernel.org/tencent_F6FC553D1BB737FC00062AD0FEF43C580F0A@qq.com
Fixes: b33752c30023 ("HID: i2c-hid: Reorganize so ACPI and OF are separate modules")
Signed-off-by: 谢致邦 (XIE Zhibang) <Yeking@Red54.com>
---
v2: Name the unused parameter and document why
acpi_device_fix_up_power() is skipped.
v3: Add a dev_warn() asking users to contact vendors for firmware
updates, and use existing locals in devm_kzalloc() and
acpi_device_fix_up_power().
v4: Double the power-up delay from 250ms to 500ms.
v5: Document why of_match_ptr() on the of_match_table is safe when
CONFIG_OF=n.
v6: Increase power-up delay from 500ms to 750ms. During cold boot on low
battery, 500ms causes non-fatal I2C transfer errors (-ENXIO). 750ms
fixes them.
v7: Drop I2C_HID_ACPI_PRP0001 Kconfig entry and build the driver under
CONFIG_I2C_HID_ACPI instead. Also wrap acpi_handle_err parameters across
two lines.
drivers/hid/i2c-hid/Makefile | 2 +-
drivers/hid/i2c-hid/i2c-hid-acpi-prp0001.c | 104 +++++++++++++++++++++
drivers/hid/i2c-hid/i2c-hid-acpi.c | 52 +++--------
drivers/hid/i2c-hid/i2c-hid-acpi.h | 33 +++++++
4 files changed, 152 insertions(+), 39 deletions(-)
create mode 100644 drivers/hid/i2c-hid/i2c-hid-acpi-prp0001.c
create mode 100644 drivers/hid/i2c-hid/i2c-hid-acpi.h
diff --git a/drivers/hid/i2c-hid/Makefile b/drivers/hid/i2c-hid/Makefile
index 55bd5e0f35af..38d5d827f3ce 100644
--- a/drivers/hid/i2c-hid/Makefile
+++ b/drivers/hid/i2c-hid/Makefile
@@ -8,7 +8,7 @@ obj-$(CONFIG_I2C_HID_CORE) += i2c-hid.o
i2c-hid-objs = i2c-hid-core.o
i2c-hid-$(CONFIG_DMI) += i2c-hid-dmi-quirks.o
-obj-$(CONFIG_I2C_HID_ACPI) += i2c-hid-acpi.o
+obj-$(CONFIG_I2C_HID_ACPI) += i2c-hid-acpi.o i2c-hid-acpi-prp0001.o
obj-$(CONFIG_I2C_HID_OF) += i2c-hid-of.o
obj-$(CONFIG_I2C_HID_OF_ELAN) += i2c-hid-of-elan.o
obj-$(CONFIG_I2C_HID_OF_GOODIX) += i2c-hid-of-goodix.o
diff --git a/drivers/hid/i2c-hid/i2c-hid-acpi-prp0001.c b/drivers/hid/i2c-hid/i2c-hid-acpi-prp0001.c
new file mode 100644
index 000000000000..d2cf4714ae7f
--- /dev/null
+++ b/drivers/hid/i2c-hid/i2c-hid-acpi-prp0001.c
@@ -0,0 +1,104 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * HID over I2C driver for PRP0001 devices missing hid-descr-addr
+ *
+ * Some devices, for example the Lenovo KaiTian N60d and Inspur CP300L3, use
+ * _HID "PRP0001" with _DSD compatible "hid-over-i2c" but lack "hid-descr-addr"
+ * from the _DSD. The HID descriptor address is provided only through an ACPI
+ * _DSM. The TPD0 node in the DSDT shows _DSM Function 1 returning 0x20.
+ *
+ * Copyright (C) 2026 谢致邦 (XIE Zhibang) <Yeking@Red54.com>
+ */
+
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/of.h>
+
+#include "i2c-hid.h"
+#include "i2c-hid-acpi.h"
+
+static int i2c_hid_acpi_prp0001_power_up(struct i2chid_ops *ops)
+{
+ /* give the device time to power up */
+ msleep(750);
+ return 0;
+}
+
+static struct i2chid_ops i2c_hid_acpi_prp0001_ops = {
+ .power_up = i2c_hid_acpi_prp0001_power_up,
+ /*
+ * No .restore_sequence needed: the _DSM on these devices returns a
+ * constant (0x20) with no side effects, unlike some PNP0C50 _DSM
+ * implementations that switch the hardware between PS/2 and I2C modes.
+ */
+};
+
+static int i2c_hid_acpi_prp0001_probe(struct i2c_client *client)
+{
+ struct device *dev = &client->dev;
+ struct acpi_device *adev;
+ u16 hid_descriptor_address;
+ int ret;
+
+ /* If hid-descr-addr is present, let i2c-hid-of handle it */
+ if (device_property_present(dev, "hid-descr-addr"))
+ return -ENODEV;
+
+ adev = ACPI_COMPANION(dev);
+ if (!adev)
+ return -ENODEV;
+
+ ret = i2c_hid_acpi_get_descriptor(adev);
+ if (ret < 0)
+ return ret;
+ dev_warn(dev,
+ "hid-descr-addr device property NOT found, using ACPI _DSM fallback. Contact vendor for firmware update!\n");
+ hid_descriptor_address = ret;
+
+ /*
+ * No acpi_device_fix_up_power() needed: TPD0 has no _PS0, _PS3, _PSC
+ * or _PRx methods and follows I2C bus power.
+ */
+ return i2c_hid_core_probe(client, &i2c_hid_acpi_prp0001_ops,
+ hid_descriptor_address, 0);
+}
+
+static const struct of_device_id i2c_hid_acpi_prp0001_of_match[] = {
+ { .compatible = "hid-over-i2c" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, i2c_hid_acpi_prp0001_of_match);
+
+static const struct i2c_device_id i2c_hid_acpi_prp0001_id[] = {
+ { .name = "hid-over-i2c" },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, i2c_hid_acpi_prp0001_id);
+
+static struct i2c_driver i2c_hid_acpi_prp0001_driver = {
+ .driver = {
+ .name = "i2c_hid_acpi_prp0001",
+ .pm = &i2c_hid_core_pm,
+ .probe_type = PROBE_PREFER_ASYNCHRONOUS,
+ /*
+ * of_match_ptr() makes this NULL when CONFIG_OF=n, but that's
+ * fine: the I2C id_table with "hid-over-i2c" handles matching
+ * via client->name (set by acpi_set_modalias() from the _DSD
+ * compatible property).
+ */
+ .of_match_table = of_match_ptr(i2c_hid_acpi_prp0001_of_match),
+ },
+
+ .probe = i2c_hid_acpi_prp0001_probe,
+ .remove = i2c_hid_core_remove,
+ .shutdown = i2c_hid_core_shutdown,
+ .id_table = i2c_hid_acpi_prp0001_id,
+};
+
+module_i2c_driver(i2c_hid_acpi_prp0001_driver);
+
+MODULE_DESCRIPTION("HID over I2C driver for PRP0001 devices missing hid-descr-addr");
+MODULE_AUTHOR("谢致邦 (XIE Zhibang) <Yeking@Red54.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/hid/i2c-hid/i2c-hid-acpi.c b/drivers/hid/i2c-hid/i2c-hid-acpi.c
index abd700a101f4..13f977d6aab6 100644
--- a/drivers/hid/i2c-hid/i2c-hid-acpi.c
+++ b/drivers/hid/i2c-hid/i2c-hid-acpi.c
@@ -25,9 +25,9 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pm.h>
-#include <linux/uuid.h>
#include "i2c-hid.h"
+#include "i2c-hid-acpi.h"
struct i2c_hid_acpi {
struct i2chid_ops ops;
@@ -48,39 +48,11 @@ static const struct acpi_device_id i2c_hid_acpi_blacklist[] = {
{ }
};
-/* HID I²C Device: 3cdff6f7-4267-4555-ad05-b30a3d8938de */
-static guid_t i2c_hid_guid =
- GUID_INIT(0x3CDFF6F7, 0x4267, 0x4555,
- 0xAD, 0x05, 0xB3, 0x0A, 0x3D, 0x89, 0x38, 0xDE);
-
-static int i2c_hid_acpi_get_descriptor(struct i2c_hid_acpi *ihid_acpi)
-{
- struct acpi_device *adev = ihid_acpi->adev;
- acpi_handle handle = acpi_device_handle(adev);
- union acpi_object *obj;
- u16 hid_descriptor_address;
-
- if (acpi_match_device_ids(adev, i2c_hid_acpi_blacklist) == 0)
- return -ENODEV;
-
- obj = acpi_evaluate_dsm_typed(handle, &i2c_hid_guid, 1, 1, NULL,
- ACPI_TYPE_INTEGER);
- if (!obj) {
- acpi_handle_err(handle, "Error _DSM call to get HID descriptor address failed\n");
- return -ENODEV;
- }
-
- hid_descriptor_address = obj->integer.value;
- ACPI_FREE(obj);
-
- return hid_descriptor_address;
-}
-
static void i2c_hid_acpi_restore_sequence(struct i2chid_ops *ops)
{
struct i2c_hid_acpi *ihid_acpi = container_of(ops, struct i2c_hid_acpi, ops);
- i2c_hid_acpi_get_descriptor(ihid_acpi);
+ i2c_hid_acpi_get_descriptor(ihid_acpi->adev);
}
static void i2c_hid_acpi_shutdown_tail(struct i2chid_ops *ops)
@@ -93,24 +65,28 @@ static void i2c_hid_acpi_shutdown_tail(struct i2chid_ops *ops)
static int i2c_hid_acpi_probe(struct i2c_client *client)
{
struct device *dev = &client->dev;
+ struct acpi_device *adev = ACPI_COMPANION(dev);
struct i2c_hid_acpi *ihid_acpi;
u16 hid_descriptor_address;
int ret;
- ihid_acpi = devm_kzalloc(&client->dev, sizeof(*ihid_acpi), GFP_KERNEL);
+ if (acpi_match_device_ids(adev, i2c_hid_acpi_blacklist) == 0)
+ return -ENODEV;
+
+ ret = i2c_hid_acpi_get_descriptor(adev);
+ if (ret < 0)
+ return ret;
+ hid_descriptor_address = ret;
+
+ ihid_acpi = devm_kzalloc(dev, sizeof(*ihid_acpi), GFP_KERNEL);
if (!ihid_acpi)
return -ENOMEM;
- ihid_acpi->adev = ACPI_COMPANION(dev);
+ ihid_acpi->adev = adev;
ihid_acpi->ops.shutdown_tail = i2c_hid_acpi_shutdown_tail;
ihid_acpi->ops.restore_sequence = i2c_hid_acpi_restore_sequence;
- ret = i2c_hid_acpi_get_descriptor(ihid_acpi);
- if (ret < 0)
- return ret;
- hid_descriptor_address = ret;
-
- acpi_device_fix_up_power(ihid_acpi->adev);
+ acpi_device_fix_up_power(adev);
return i2c_hid_core_probe(client, &ihid_acpi->ops,
hid_descriptor_address, 0);
diff --git a/drivers/hid/i2c-hid/i2c-hid-acpi.h b/drivers/hid/i2c-hid/i2c-hid-acpi.h
new file mode 100644
index 000000000000..0bbed1853313
--- /dev/null
+++ b/drivers/hid/i2c-hid/i2c-hid-acpi.h
@@ -0,0 +1,33 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#ifndef _I2C_HID_ACPI_H
+#define _I2C_HID_ACPI_H
+
+#include <linux/acpi.h>
+#include <linux/uuid.h>
+
+static inline int i2c_hid_acpi_get_descriptor(struct acpi_device *adev)
+{
+ /* HID I²C Device: 3cdff6f7-4267-4555-ad05-b30a3d8938de */
+ static const guid_t i2c_hid_guid =
+ GUID_INIT(0x3CDFF6F7, 0x4267, 0x4555,
+ 0xAD, 0x05, 0xB3, 0x0A, 0x3D, 0x89, 0x38, 0xDE);
+
+ acpi_handle handle = acpi_device_handle(adev);
+ union acpi_object *obj;
+ u16 addr;
+
+ obj = acpi_evaluate_dsm_typed(handle, &i2c_hid_guid,
+ 1, 1, NULL, ACPI_TYPE_INTEGER);
+ if (!obj) {
+ acpi_handle_err(handle,
+ "Error _DSM call to get HID descriptor address failed\n");
+ return -ENODEV;
+ }
+
+ addr = obj->integer.value;
+ ACPI_FREE(obj);
+ return addr;
+}
+
+#endif
--
2.52.0
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH v7] HID: i2c-hid: Refactor _DSM helper and add i2c-hid-acpi-prp0001 driver
2026-06-30 5:04 ` [PATCH v7] " 谢致邦 (XIE Zhibang)
@ 2026-07-27 13:22 ` 谢致邦 (XIE Zhibang)
2026-08-03 17:31 ` Jiri Kosina
1 sibling, 0 replies; 6+ messages in thread
From: 谢致邦 (XIE Zhibang) @ 2026-07-27 13:22 UTC (permalink / raw)
To: linux-input, hansg, dmitry.torokhov, bentiss, jikos, yeking
Cc: dianders, linux-kernel, sashiko-bot, sashiko-reviews, superm1
Hi Hans, hi Benjamin, hi Jiri,
Friendly ping — v7 was posted on Jun 30:
https://lore.kernel.org/all/tencent_76FCB13C1FB6FBFFA004F2D19AF6E458030A@qq.com/
No further review comments have come in.
Is there anything else you'd like changed?
Regards,
Zhibang
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH v7] HID: i2c-hid: Refactor _DSM helper and add i2c-hid-acpi-prp0001 driver
2026-06-30 5:04 ` [PATCH v7] " 谢致邦 (XIE Zhibang)
2026-07-27 13:22 ` 谢致邦 (XIE Zhibang)
@ 2026-08-03 17:31 ` Jiri Kosina
1 sibling, 0 replies; 6+ messages in thread
From: Jiri Kosina @ 2026-08-03 17:31 UTC (permalink / raw)
To: 谢致邦 (XIE Zhibang)
Cc: linux-input, hansg, dmitry.torokhov, bentiss, dianders,
linux-kernel, sashiko-bot, sashiko-reviews, superm1
On Tue, 30 Jun 2026, 谢致邦 (XIE Zhibang) wrote:
> Move the _DSM call that gets the HID descriptor address from
> i2c-hid-acpi.c into i2c-hid-acpi.h as a static inline so both the ACPI
> and the new PRP0001 driver can use it. While refactoring, move the
> blacklist check and the _DSM call to the top of probe() to avoid a
> pointless alloc when the device is blacklisted or does not implement the
> _DSM.
>
> Some devices, for example the Lenovo KaiTian N60d and Inspur CP300L3,
> are declared with _HID "PRP0001" and _DSD compatible "hid-over-i2c" but
> lack "hid-descr-addr" from the _DSD and provide the HID descriptor
> address only through an ACPI _DSM. The OF driver fails to probe them
> because it requires hid-descr-addr. Add a new driver that handles these
> devices by calling the shared _DSM helper.
>
> Link: https://lore.kernel.org/tencent_F6FC553D1BB737FC00062AD0FEF43C580F0A@qq.com
> Fixes: b33752c30023 ("HID: i2c-hid: Reorganize so ACPI and OF are separate modules")
> Signed-off-by: 谢致邦 (XIE Zhibang) <Yeking@Red54.com>
> ---
> v2: Name the unused parameter and document why
> acpi_device_fix_up_power() is skipped.
> v3: Add a dev_warn() asking users to contact vendors for firmware
> updates, and use existing locals in devm_kzalloc() and
> acpi_device_fix_up_power().
> v4: Double the power-up delay from 250ms to 500ms.
> v5: Document why of_match_ptr() on the of_match_table is safe when
> CONFIG_OF=n.
> v6: Increase power-up delay from 500ms to 750ms. During cold boot on low
> battery, 500ms causes non-fatal I2C transfer errors (-ENXIO). 750ms
> fixes them.
> v7: Drop I2C_HID_ACPI_PRP0001 Kconfig entry and build the driver under
> CONFIG_I2C_HID_ACPI instead. Also wrap acpi_handle_err parameters across
> two lines.
Applied, thanks.
--
Jiri Kosina
SUSE Labs
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2026-08-03 17:31 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
[not found] <20260609110608.3F4C21F00898@smtp.kernel.org>
2026-06-12 10:38 ` [PATCH v5] HID: i2c-hid: Refactor _DSM helper and add i2c-hid-acpi-prp0001 driver 谢致邦 (XIE Zhibang)
2026-06-24 17:46 ` [PATCH v6] " 谢致邦 (XIE Zhibang)
2026-06-29 9:04 ` Jiri Kosina
2026-06-30 5:04 ` [PATCH v7] " 谢致邦 (XIE Zhibang)
2026-07-27 13:22 ` 谢致邦 (XIE Zhibang)
2026-08-03 17:31 ` Jiri Kosina
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®