mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: tip-bot for Jonas Jensen <tipbot@zytor.com>
To: linux-tip-commits@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, hpa@zytor.com, mingo@kernel.org,
	jonas.jensen@gmail.com, tglx@linutronix.de
Subject: [tip:irq/urgent] irqchip: Add support for MOXA ART SoCs
Date: Fri, 5 Jul 2013 02:49:10 -0700	[thread overview]
Message-ID: <tip-4de563ae821b1935b3c467a4606e5738b0b0df87@git.kernel.org> (raw)
In-Reply-To: <1372941531-6393-1-git-send-email-jonas.jensen@gmail.com>

Commit-ID:  4de563ae821b1935b3c467a4606e5738b0b0df87
Gitweb:     http://git.kernel.org/tip/4de563ae821b1935b3c467a4606e5738b0b0df87
Author:     Jonas Jensen <jonas.jensen@gmail.com>
AuthorDate: Thu, 4 Jul 2013 14:38:51 +0200
Committer:  Thomas Gleixner <tglx@linutronix.de>
CommitDate: Fri, 5 Jul 2013 11:39:25 +0200

irqchip: Add support for MOXA ART SoCs

This patch adds an irqchip driver for the main interrupt controller
found on MOXA ART SoCs.

Signed-off-by: Jonas Jensen <jonas.jensen@gmail.com>
Cc: grant.likely@secretlab.ca
Cc: thomas.petazzoni@free-electrons.com
Cc: arnd@arndb.de
Cc: u.kleine-koenig@pengutronix.de
Cc: linux@arm.linux.org.uk
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/1372941531-6393-1-git-send-email-jonas.jensen@gmail.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
 drivers/irqchip/Makefile     |   1 +
 drivers/irqchip/irq-moxart.c | 117 +++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 118 insertions(+)

diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
index 2065ef6..e65c41a 100644
--- a/drivers/irqchip/Makefile
+++ b/drivers/irqchip/Makefile
@@ -7,6 +7,7 @@ obj-$(CONFIG_ARCH_MXS)			+= irq-mxs.o
 obj-$(CONFIG_ARCH_S3C24XX)		+= irq-s3c24xx.o
 obj-$(CONFIG_METAG)			+= irq-metag-ext.o
 obj-$(CONFIG_METAG_PERFCOUNTER_IRQS)	+= irq-metag.o
+obj-$(CONFIG_ARCH_MOXART)		+= irq-moxart.o
 obj-$(CONFIG_ORION_IRQCHIP)		+= irq-orion.o
 obj-$(CONFIG_ARCH_SUNXI)		+= irq-sun4i.o
 obj-$(CONFIG_ARCH_SPEAR3XX)		+= spear-shirq.o
diff --git a/drivers/irqchip/irq-moxart.c b/drivers/irqchip/irq-moxart.c
new file mode 100644
index 0000000..5552fc2
--- /dev/null
+++ b/drivers/irqchip/irq-moxart.c
@@ -0,0 +1,117 @@
+/*
+ * MOXA ART SoCs IRQ chip driver.
+ *
+ * Copyright (C) 2013 Jonas Jensen
+ *
+ * Jonas Jensen <jonas.jensen@gmail.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/irqdomain.h>
+
+#include <asm/exception.h>
+
+#include "irqchip.h"
+
+#define IRQ_SOURCE_REG		0
+#define IRQ_MASK_REG		0x04
+#define IRQ_CLEAR_REG		0x08
+#define IRQ_MODE_REG		0x0c
+#define IRQ_LEVEL_REG		0x10
+#define IRQ_STATUS_REG		0x14
+
+#define FIQ_SOURCE_REG		0x20
+#define FIQ_MASK_REG		0x24
+#define FIQ_CLEAR_REG		0x28
+#define FIQ_MODE_REG		0x2c
+#define FIQ_LEVEL_REG		0x30
+#define FIQ_STATUS_REG		0x34
+
+
+struct moxart_irq_data {
+	void __iomem *base;
+	struct irq_domain *domain;
+	unsigned int interrupt_mask;
+};
+
+static struct moxart_irq_data intc;
+
+static asmlinkage void __exception_irq_entry handle_irq(struct pt_regs *regs)
+{
+	u32 irqstat;
+	int hwirq;
+
+	irqstat = readl(intc.base + IRQ_STATUS_REG);
+
+	while (irqstat) {
+		hwirq = ffs(irqstat) - 1;
+		handle_IRQ(irq_linear_revmap(intc.domain, hwirq), regs);
+		irqstat &= ~(1 << hwirq);
+	}
+}
+
+static int __init moxart_of_intc_init(struct device_node *node,
+				      struct device_node *parent)
+{
+	unsigned int clr = IRQ_NOREQUEST | IRQ_NOPROBE | IRQ_NOAUTOEN;
+	int ret;
+	struct irq_chip_generic *gc;
+
+	intc.base = of_iomap(node, 0);
+	if (!intc.base) {
+		pr_err("%s: unable to map IC registers\n",
+		       node->full_name);
+		return -EINVAL;
+	}
+
+	intc.domain = irq_domain_add_linear(node, 32, &irq_generic_chip_ops,
+					    intc.base);
+	if (!intc.domain) {
+		pr_err("%s: unable to create IRQ domain\n", node->full_name);
+		return -EINVAL;
+	}
+
+	ret = irq_alloc_domain_generic_chips(intc.domain, 32, 1,
+					     "MOXARTINTC", handle_edge_irq,
+					     clr, 0, IRQ_GC_INIT_MASK_CACHE);
+	if (ret) {
+		pr_err("%s: could not allocate generic chip\n",
+		       node->full_name);
+		irq_domain_remove(intc.domain);
+		return -EINVAL;
+	}
+
+	ret = of_property_read_u32(node, "interrupt-mask",
+				   &intc.interrupt_mask);
+	if (ret)
+		pr_err("%s: could not read interrupt-mask DT property\n",
+		       node->full_name);
+
+	gc = irq_get_domain_generic_chip(intc.domain, 0);
+
+	gc->reg_base = intc.base;
+	gc->chip_types[0].regs.mask = IRQ_MASK_REG;
+	gc->chip_types[0].regs.ack = IRQ_CLEAR_REG;
+	gc->chip_types[0].chip.irq_ack = irq_gc_ack_set_bit;
+	gc->chip_types[0].chip.irq_mask = irq_gc_mask_clr_bit;
+	gc->chip_types[0].chip.irq_unmask = irq_gc_mask_set_bit;
+
+	writel(0, intc.base + IRQ_MASK_REG);
+	writel(0xffffffff, intc.base + IRQ_CLEAR_REG);
+
+	writel(intc.interrupt_mask, intc.base + IRQ_MODE_REG);
+	writel(intc.interrupt_mask, intc.base + IRQ_LEVEL_REG);
+
+	set_handle_irq(handle_irq);
+
+	return 0;
+}
+IRQCHIP_DECLARE(moxa_moxart_ic, "moxa,moxart-ic", moxart_of_intc_init);

      reply	other threads:[~2013-07-05  9:49 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-06-18  9:59 [PATCH] ARM: irqchip: add " Jonas Jensen
2013-06-18 10:35 ` Russell King - ARM Linux
2013-06-18 12:54   ` Arnd Bergmann
2013-06-18 13:41 ` Thomas Petazzoni
2013-06-20  8:58   ` [PATCH v2] " Jonas Jensen
2013-06-20 10:17     ` Arnd Bergmann
2013-06-24 13:18     ` Grant Likely
2013-06-27 13:29     ` [PATCH v3] ARM: " Jonas Jensen
2013-06-27 17:49       ` Uwe Kleine-König
2013-07-01 14:34       ` [PATCH v4] " Jonas Jensen
2013-07-04 12:38         ` [PATCH v5] " Jonas Jensen
2013-07-05  9:49           ` tip-bot for Jonas Jensen [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=tip-4de563ae821b1935b3c467a4606e5738b0b0df87@git.kernel.org \
    --to=tipbot@zytor.com \
    --cc=hpa@zytor.com \
    --cc=jonas.jensen@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-tip-commits@vger.kernel.org \
    --cc=mingo@kernel.org \
    --cc=tglx@linutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

Powered by JetHome