From: tip-bot for Gleb Natapov <gleb@redhat.com>
To: linux-tip-commits@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, hpa@zytor.com, mingo@redhat.com,
gleb@redhat.com, suresh.b.siddha@intel.com, tglx@linutronix.de,
sheng@linux.intel.com, mingo@elte.hu, avi@redhat.com
Subject: [tip:x86/apic] x86/apic: Enable x2APIC without interrupt remapping under KVM
Date: Wed, 5 Aug 2009 10:55:40 GMT [thread overview]
Message-ID: <tip-da5b16c8d0208eee0d0c9f427279363599ef7266@git.kernel.org> (raw)
In-Reply-To: <20090720122417.GR5638@redhat.com>
Commit-ID: da5b16c8d0208eee0d0c9f427279363599ef7266
Gitweb: http://git.kernel.org/tip/da5b16c8d0208eee0d0c9f427279363599ef7266
Author: Gleb Natapov <gleb@redhat.com>
AuthorDate: Mon, 20 Jul 2009 15:24:17 +0300
Committer: Ingo Molnar <mingo@elte.hu>
CommitDate: Wed, 5 Aug 2009 10:31:04 +0200
x86/apic: Enable x2APIC without interrupt remapping under KVM
KVM would like to provide x2APIC interface to a guest without emulating
interrupt remapping device. The reason KVM prefers guest to use x2APIC
is that x2APIC interface is better virtualizable and provides better
performance than mmio xAPIC interface:
- msr exits are faster than mmio (no page table walk, emulation)
- no need to read back ICR to look at the busy bit
- one 64 bit ICR write instead of two 32 bit writes
- shared code with the Hyper-V paravirt interface
Included patch changes x2APIC enabling logic to enable it even if IR
initialization failed, but kernel runs under KVM and no apic id is
greater than 255 (if there is one spec requires BIOS to move to x2apic
mode before starting an OS).
-v2: fix build
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Acked-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Sheng Yang <sheng@linux.intel.com>
Cc: "avi@redhat.com" <avi@redhat.com>
LKML-Reference: <20090720122417.GR5638@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
arch/x86/include/asm/apic.h | 7 +++
arch/x86/kernel/apic/apic.c | 83 +++++++++++++++++++++-----------------
arch/x86/kernel/apic/probe_64.c | 6 +-
3 files changed, 56 insertions(+), 40 deletions(-)
diff --git a/arch/x86/include/asm/apic.h b/arch/x86/include/asm/apic.h
index bb7d479..ebdbf54 100644
--- a/arch/x86/include/asm/apic.h
+++ b/arch/x86/include/asm/apic.h
@@ -183,6 +183,10 @@ static inline int x2apic_enabled(void)
}
#define x2apic_supported() (cpu_has_x2apic)
+static inline void x2apic_force_phys(void)
+{
+ x2apic_phys = 1;
+}
#else
static inline void check_x2apic(void)
{
@@ -194,6 +198,9 @@ static inline int x2apic_enabled(void)
{
return 0;
}
+static inline void x2apic_force_phys()
+{
+}
#define x2apic_preenabled 0
#define x2apic_supported() 0
diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
index 0b021c5..de039fc 100644
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -49,6 +49,7 @@
#include <asm/mtrr.h>
#include <asm/smp.h>
#include <asm/mce.h>
+#include <asm/kvm_para.h>
unsigned int num_processors;
@@ -1361,52 +1362,76 @@ void enable_x2apic(void)
}
#endif /* CONFIG_X86_X2APIC */
-void __init enable_IR_x2apic(void)
+int __init enable_IR(void)
{
#ifdef CONFIG_INTR_REMAP
int ret;
- unsigned long flags;
- struct IO_APIC_route_entry **ioapic_entries = NULL;
ret = dmar_table_init();
if (ret) {
pr_debug("dmar_table_init() failed with %d:\n", ret);
- goto ir_failed;
+ return 0;
}
if (!intr_remapping_supported()) {
pr_debug("intr-remapping not supported\n");
- goto ir_failed;
+ return 0;
}
-
if (!x2apic_preenabled && skip_ioapic_setup) {
pr_info("Skipped enabling intr-remap because of skipping "
"io-apic setup\n");
- return;
+ return 0;
}
+ if (enable_intr_remapping(x2apic_supported()))
+ return 0;
+
+ pr_info("Enabled Interrupt-remapping\n");
+
+ return 1;
+
+#endif
+ return 0;
+}
+
+void __init enable_IR_x2apic(void)
+{
+ unsigned long flags;
+ struct IO_APIC_route_entry **ioapic_entries = NULL;
+ int ret, x2apic_enabled = 0;
+
ioapic_entries = alloc_ioapic_entries();
if (!ioapic_entries) {
- pr_info("Allocate ioapic_entries failed: %d\n", ret);
- goto end;
+ pr_err("Allocate ioapic_entries failed\n");
+ goto out;
}
ret = save_IO_APIC_setup(ioapic_entries);
if (ret) {
pr_info("Saving IO-APIC state failed: %d\n", ret);
- goto end;
+ goto out;
}
local_irq_save(flags);
- mask_IO_APIC_setup(ioapic_entries);
mask_8259A();
+ mask_IO_APIC_setup(ioapic_entries);
- ret = enable_intr_remapping(x2apic_supported());
- if (ret)
- goto end_restore;
+ ret = enable_IR();
+ if (!ret) {
+ /* IR is required if there is APIC ID > 255 even when running
+ * under KVM
+ */
+ if (max_physical_apicid > 255 || !kvm_para_available())
+ goto nox2apic;
+ /*
+ * without IR all CPUs can be addressed by IOAPIC/MSI
+ * only in physical mode
+ */
+ x2apic_force_phys();
+ }
- pr_info("Enabled Interrupt-remapping\n");
+ x2apic_enabled = 1;
if (x2apic_supported() && !x2apic_mode) {
x2apic_mode = 1;
@@ -1414,41 +1439,25 @@ void __init enable_IR_x2apic(void)
pr_info("Enabled x2apic\n");
}
-end_restore:
- if (ret)
- /*
- * IR enabling failed
- */
+nox2apic:
+ if (!ret) /* IR enabling failed */
restore_IO_APIC_setup(ioapic_entries);
-
unmask_8259A();
local_irq_restore(flags);
-end:
+out:
if (ioapic_entries)
free_ioapic_entries(ioapic_entries);
- if (!ret)
+ if (x2apic_enabled)
return;
-ir_failed:
if (x2apic_preenabled)
- panic("x2apic enabled by bios. But IR enabling failed");
+ panic("x2apic: enabled by BIOS but kernel init failed.");
else if (cpu_has_x2apic)
- pr_info("Not enabling x2apic,Intr-remapping\n");
-#else
- if (!cpu_has_x2apic)
- return;
-
- if (x2apic_preenabled)
- panic("x2apic enabled prior OS handover,"
- " enable CONFIG_X86_X2APIC, CONFIG_INTR_REMAP");
-#endif
-
- return;
+ pr_info("Not enabling x2apic, Intr-remapping init failed.\n");
}
-
#ifdef CONFIG_X86_64
/*
* Detect and enable local APICs on non-SMP boards.
diff --git a/arch/x86/kernel/apic/probe_64.c b/arch/x86/kernel/apic/probe_64.c
index bc3e880..f3b1037 100644
--- a/arch/x86/kernel/apic/probe_64.c
+++ b/arch/x86/kernel/apic/probe_64.c
@@ -50,11 +50,11 @@ static struct apic *apic_probe[] __initdata = {
void __init default_setup_apic_routing(void)
{
#ifdef CONFIG_X86_X2APIC
- if (x2apic_mode && (apic != &apic_x2apic_phys &&
+ if (x2apic_mode
#ifdef CONFIG_X86_UV
- apic != &apic_x2apic_uv_x &&
+ && apic != &apic_x2apic_uv_x
#endif
- apic != &apic_x2apic_cluster)) {
+ ) {
if (x2apic_phys)
apic = &apic_x2apic_phys;
else
next prev parent reply other threads:[~2009-08-05 10:56 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-07-20 12:24 [PATCH] enable " Gleb Natapov
2009-08-04 13:15 ` [tip:x86/apic] x86/apic: Enable " tip-bot for Gleb Natapov
2009-08-04 13:37 ` Ingo Molnar
2009-08-04 16:57 ` Gleb Natapov
2009-08-05 12:16 ` Ingo Molnar
2009-08-05 12:19 ` Gleb Natapov
2009-08-05 12:26 ` Gleb Natapov
2009-08-05 10:55 ` tip-bot for Gleb Natapov [this message]
2009-08-05 12:30 ` tip-bot for Gleb Natapov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=tip-da5b16c8d0208eee0d0c9f427279363599ef7266@git.kernel.org \
--to=gleb@redhat.com \
--cc=avi@redhat.com \
--cc=hpa@zytor.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-tip-commits@vger.kernel.org \
--cc=mingo@elte.hu \
--cc=mingo@redhat.com \
--cc=sheng@linux.intel.com \
--cc=suresh.b.siddha@intel.com \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome