* [PATCH]: x86: print APIC data a little later during boot
@ 2011-07-08 8:36 Naga Chumbalkar
2011-07-08 12:58 ` [tip:x86/apic] " tip-bot for Naga Chumbalkar
0 siblings, 1 reply; 2+ messages in thread
From: Naga Chumbalkar @ 2011-07-08 8:36 UTC (permalink / raw)
To: x86; +Cc: Naga Chumbalkar, mingo, tglx, linux-kernel, hpa
To view IOAPIC data you could boot with "apic=debug".
For example:
NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect:
00 000 1 0 0 0 0 0 0 00
01 000 0 0 0 0 0 0 0 31
02 000 0 0 0 0 0 0 0 30
03 000 0 0 0 0 0 0 0 33
04 000 0 0 0 0 0 0 0 34
05 000 0 0 0 0 0 0 0 35
06 000 0 0 0 0 0 0 0 36
07 000 0 0 0 0 0 0 0 37
08 000 0 0 0 0 0 0 0 38
09 000 0 1 0 0 0 0 0 39
0a 000 0 0 0 0 0 0 0 3A
0b 000 0 0 0 0 0 0 0 3B
0c 000 0 0 0 0 0 0 0 3C
0d 000 0 0 0 0 0 0 0 3D
0e 000 0 0 0 0 0 0 0 3E
0f 000 0 0 0 0 0 0 0 3F
10 000 1 0 0 0 0 0 0 00
11 000 1 0 0 0 0 0 0 00
12 000 1 0 0 0 0 0 0 00
13 000 1 0 0 0 0 0 0 00
14 000 1 0 0 0 0 0 0 00
15 000 1 0 0 0 0 0 0 00
16 000 1 0 0 0 0 0 0 00
17 000 1 0 0 0 0 0 0 00
Delaying the call to print APIC data gives better results:
NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect:
00 000 1 0 0 0 0 0 0 00
01 000 0 0 0 0 0 0 0 31
02 000 0 0 0 0 0 0 0 30
03 000 1 0 0 0 0 0 0 33
04 000 1 0 0 0 0 0 0 34
05 000 1 0 0 0 0 0 0 35
06 000 1 0 0 0 0 0 0 36
07 000 1 0 0 0 0 0 0 37
08 000 0 0 0 0 0 0 0 38
09 000 0 1 0 0 0 0 0 39
0a 000 1 0 0 0 0 0 0 3A
0b 000 1 0 0 0 0 0 0 3B
0c 000 0 0 0 0 0 0 0 3C
0d 000 1 0 0 0 0 0 0 3D
0e 000 1 0 0 0 0 0 0 3E
0f 000 1 0 0 0 0 0 0 3F
10 000 1 1 0 1 0 0 0 29
11 000 1 0 0 0 0 0 0 00
12 000 1 0 0 0 0 0 0 00
13 000 1 0 0 0 0 0 0 00
14 000 0 1 0 1 0 0 0 51
15 000 1 0 0 0 0 0 0 00
16 000 0 1 0 1 0 0 0 61
17 000 0 1 0 1 0 0 0 59
Notice that the entries beyond interrupt input signal 0x0f also
get populated.
Signed-off-by: Naga Chumbalkar <nagananda.chumbalkar@hp.com>
diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index e529339..98c8d7e 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -1792,7 +1792,7 @@ __apicdebuginit(int) print_ICs(void)
return 0;
}
-fs_initcall(print_ICs);
+late_initcall(print_ICs);
/* Where if anywhere is the i8259 connect in external int mode */
^ permalink raw reply [flat|nested] 2+ messages in thread
* [tip:x86/apic] x86: print APIC data a little later during boot
2011-07-08 8:36 [PATCH]: x86: print APIC data a little later during boot Naga Chumbalkar
@ 2011-07-08 12:58 ` tip-bot for Naga Chumbalkar
0 siblings, 0 replies; 2+ messages in thread
From: tip-bot for Naga Chumbalkar @ 2011-07-08 12:58 UTC (permalink / raw)
To: linux-tip-commits
Cc: linux-kernel, hpa, mingo, nagananda.chumbalkar, tglx, mingo
Commit-ID: ded1f6ab43a03be74a53649cf388b5424d447584
Gitweb: http://git.kernel.org/tip/ded1f6ab43a03be74a53649cf388b5424d447584
Author: Naga Chumbalkar <nagananda.chumbalkar@hp.com>
AuthorDate: Fri, 8 Jul 2011 08:36:34 +0000
Committer: Ingo Molnar <mingo@elte.hu>
CommitDate: Fri, 8 Jul 2011 13:20:14 +0200
x86: print APIC data a little later during boot
To view IOAPIC data you could boot with "apic=debug".
When booting in such a way then the kernel will dump the
IO-APIC's registers, for example:
NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect:
00 000 1 0 0 0 0 0 0 00
01 000 0 0 0 0 0 0 0 31
02 000 0 0 0 0 0 0 0 30
03 000 0 0 0 0 0 0 0 33
04 000 0 0 0 0 0 0 0 34
05 000 0 0 0 0 0 0 0 35
06 000 0 0 0 0 0 0 0 36
07 000 0 0 0 0 0 0 0 37
08 000 0 0 0 0 0 0 0 38
09 000 0 1 0 0 0 0 0 39
0a 000 0 0 0 0 0 0 0 3A
0b 000 0 0 0 0 0 0 0 3B
0c 000 0 0 0 0 0 0 0 3C
0d 000 0 0 0 0 0 0 0 3D
0e 000 0 0 0 0 0 0 0 3E
0f 000 0 0 0 0 0 0 0 3F
10 000 1 0 0 0 0 0 0 00
11 000 1 0 0 0 0 0 0 00
12 000 1 0 0 0 0 0 0 00
13 000 1 0 0 0 0 0 0 00
14 000 1 0 0 0 0 0 0 00
15 000 1 0 0 0 0 0 0 00
16 000 1 0 0 0 0 0 0 00
17 000 1 0 0 0 0 0 0 00
Delaying the call to print_ICs() gives better results:
NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect:
00 000 1 0 0 0 0 0 0 00
01 000 0 0 0 0 0 0 0 31
02 000 0 0 0 0 0 0 0 30
03 000 1 0 0 0 0 0 0 33
04 000 1 0 0 0 0 0 0 34
05 000 1 0 0 0 0 0 0 35
06 000 1 0 0 0 0 0 0 36
07 000 1 0 0 0 0 0 0 37
08 000 0 0 0 0 0 0 0 38
09 000 0 1 0 0 0 0 0 39
0a 000 1 0 0 0 0 0 0 3A
0b 000 1 0 0 0 0 0 0 3B
0c 000 0 0 0 0 0 0 0 3C
0d 000 1 0 0 0 0 0 0 3D
0e 000 1 0 0 0 0 0 0 3E
0f 000 1 0 0 0 0 0 0 3F
10 000 1 1 0 1 0 0 0 29
11 000 1 0 0 0 0 0 0 00
12 000 1 0 0 0 0 0 0 00
13 000 1 0 0 0 0 0 0 00
14 000 0 1 0 1 0 0 0 51
15 000 1 0 0 0 0 0 0 00
16 000 0 1 0 1 0 0 0 61
17 000 0 1 0 1 0 0 0 59
Notice that the entries beyond interrupt input signal 0x0f also
get populated and arent just the hw-initialization default of
all zeroes.
Signed-off-by: Naga Chumbalkar <nagananda.chumbalkar@hp.com>
Link: http://lkml.kernel.org/r/20110708083555.2598.42216.sendpatchset@nchumbalkar.americas.hpqcorp.net
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
arch/x86/kernel/apic/io_apic.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index e529339..98c8d7e 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -1792,7 +1792,7 @@ __apicdebuginit(int) print_ICs(void)
return 0;
}
-fs_initcall(print_ICs);
+late_initcall(print_ICs);
/* Where if anywhere is the i8259 connect in external int mode */
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2011-07-08 12:58 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2011-07-08 8:36 [PATCH]: x86: print APIC data a little later during boot Naga Chumbalkar
2011-07-08 12:58 ` [tip:x86/apic] " tip-bot for Naga Chumbalkar
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome