mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Stefan Richter <stefanr@s5r6.in-berlin.de>
To: linux1394-devel@lists.sourceforge.net
Cc: linux-kernel@vger.kernel.org
Subject: [PATCH 7/8] firewire: ohci: fix IR/IT context mask mixup
Date: Sun, 21 Feb 2010 17:58:52 +0100 (CET)	[thread overview]
Message-ID: <tkrat.cf421c1f87e76626@s5r6.in-berlin.de> (raw)
In-Reply-To: <tkrat.70de9801677fe5e9@s5r6.in-berlin.de>

This bug was present in firewire-ohci since day one:  The number of
available isochronous receive DMA contexts was mixed up with that of
available isochronous transmit DMA contexts.

This is harmless on a few chips which offer the same number of contexts
in both directions, but most chips nowadays implement only the standard
minimum of 4 IR contexts, but 8 IT contexts.  If a user attempted to run
a lot of IR contexts at once, results with more than four were therefore
unpredictable.  I suppose the controller would simply refuse to start
DMA of any unimplemented context.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
---
 drivers/firewire/ohci.c |   14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

Index: b/drivers/firewire/ohci.c
===================================================================
--- a/drivers/firewire/ohci.c
+++ b/drivers/firewire/ohci.c
@@ -2395,17 +2395,17 @@ static int __devinit pci_probe(struct pc
 		     OHCI1394_AsRspTrContextControlSet, handle_at_packet);
 
 	reg_write(ohci, OHCI1394_IsoRecvIntMaskSet, ~0);
-	ohci->it_context_mask = reg_read(ohci, OHCI1394_IsoRecvIntMaskSet);
+	ohci->ir_context_channels = ~0ULL;
+	ohci->ir_context_mask = reg_read(ohci, OHCI1394_IsoRecvIntMaskSet);
 	reg_write(ohci, OHCI1394_IsoRecvIntMaskClear, ~0);
-	size = sizeof(struct iso_context) * hweight32(ohci->it_context_mask);
-	ohci->it_context_list = kzalloc(size, GFP_KERNEL);
+	size = sizeof(struct iso_context) * hweight32(ohci->ir_context_mask);
+	ohci->ir_context_list = kzalloc(size, GFP_KERNEL);
 
 	reg_write(ohci, OHCI1394_IsoXmitIntMaskSet, ~0);
-	ohci->ir_context_channels = ~0ULL;
-	ohci->ir_context_mask = reg_read(ohci, OHCI1394_IsoXmitIntMaskSet);
+	ohci->it_context_mask = reg_read(ohci, OHCI1394_IsoXmitIntMaskSet);
 	reg_write(ohci, OHCI1394_IsoXmitIntMaskClear, ~0);
-	size = sizeof(struct iso_context) * hweight32(ohci->ir_context_mask);
-	ohci->ir_context_list = kzalloc(size, GFP_KERNEL);
+	size = sizeof(struct iso_context) * hweight32(ohci->it_context_mask);
+	ohci->it_context_list = kzalloc(size, GFP_KERNEL);
 
 	if (ohci->it_context_list == NULL || ohci->ir_context_list == NULL) {
 		err = -ENOMEM;

-- 
Stefan Richter
-=====-==-=- --=- =-=-=
http://arcgraph.de/sr/


  parent reply	other threads:[~2010-02-21 16:59 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-02-21 16:55 [PATCH 0/8] firewire: misc updates Stefan Richter
2010-02-21 16:56 ` [PATCH 1/8] firewire: core: change type of a data buffer Stefan Richter
2010-02-21 16:56 ` [PATCH 2/8] firewire: core: combine a bit of repeated code Stefan Richter
2010-02-21 16:57 ` [PATCH 3/8] firewire: ohci: remove unused dualbuffer IR code Stefan Richter
2010-02-21 16:57 ` [PATCH 4/8] firewire: ohci: reorder struct fw_ohci for better cache efficiency Stefan Richter
2010-02-21 16:58 ` [PATCH 5/8] firewire: ohci: use an ID table for quirks detection Stefan Richter
2010-02-21 16:58 ` [PATCH 6/8] firewire: ohci: add module parameter to activate quirk fixes Stefan Richter
2010-02-21 22:26   ` Stefan Richter
2010-02-21 16:58 ` Stefan Richter [this message]
2010-02-21 16:59 ` [PATCH 8/8] firewire: ohci: extend initialization log message Stefan Richter

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=tkrat.cf421c1f87e76626@s5r6.in-berlin.de \
    --to=stefanr@s5r6.in-berlin.de \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux1394-devel@lists.sourceforge.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®