[PATCH] scsi: mpt3sas: Reduce log level of `set ignore_delay_remove for handle(0x%04x)` to info

[PATCH] scsi: mpt3sas: Reduce log level of `set ignore_delay_remove for handle(0x%04x)` to info

[Paul Menzel]

On several systems with Dell HBA controller Linux prints the warning below:

    $ dmesg | grep -e "Linux version" -e "DMI: Dell"  -e "ignore_delay_remove"
    [    0.000000] Linux version 6.12.11.mx64.479 (root@lucy.molgen.mpg.de) (gcc (GCC) 12.3.0, GNU ld (GNU Binutils) 2.41) #1 SMP PREEMPT_DYNAMIC Fri Jan 24 13:30:47 CET 2025
    [    0.000000] DMI: Dell Inc. PowerEdge R7625/0M7YXP, BIOS 1.10.6 12/06/2024
    [    9.386551] scsi 0:0:4:0: set ignore_delay_remove for handle(0x0012)

A user does not know, what to do about it, and everything seems to work as
expected. Therefore, remove the log level from warning to info.

Device information:

    $ dmesg | grep -e 0:4:0 -e '12)'
    [    8.857606] mpt3sas_cm0: config page(0x00000000db0e4179) - dma(0xfd5f6000): size(512)
    [    9.133856] scsi 0:0:0:0: SATA: handle(0x0017), sas_addr(0x3c0470e0d40cc20c), phy(12), device_name(0x5000039db8d2284b)
    [    9.366341] mpt3sas_cm0: handle(0x12) sas_address(0x3c0570e0d40cc208) port_type(0x0)
    [    9.378867] scsi 0:0:4:0: Enclosure         DP       BP_PSV           7.10 PQ: 0 ANSI: 7
    [    9.386551] scsi 0:0:4:0: set ignore_delay_remove for handle(0x0012)
    [    9.387465] scsi 0:0:4:0: SES: handle(0x0012), sas_addr(0x3c0570e0d40cc208), phy(17), device_name(0x3c0570e0d40cc208)
    [    9.387465] scsi 0:0:4:0: enclosure logical id (0x3c0470e0d4092108), slot(8)
    [    9.387465] scsi 0:0:4:0: enclosure level(0x0001), connector name( C0  )
    [    9.390495] scsi 0:0:4:0: qdepth(1), tagged(0), scsi_level(8), cmd_que(0)
    [    9.401700]  end_device-0:4: add: handle(0x0012), sas_addr(0x3c0570e0d40cc208)
    [    9.471916] ses 0:0:4:0: Attached Enclosure device
    [    9.480088] ses 0:0:4:0: Attached scsi generic sg4 type 13
    $ lspci -nn -k -s 41:
    41:00.0 Serial Attached SCSI controller [0107]: Broadcom / LSI Fusion-MPT 12GSAS/PCIe Secure SAS38xx [1000:00e6]
    	DeviceName: SL3 NonRAID
    	Subsystem: Dell HBA355i Front [1028:200c]
    	Kernel driver in use: mpt3sas

Fixes: 30158dc9bbc9 ("mpt3sas: Never block the Enclosure device")
Cc: Tomas Henzl <thenzl@redhat.com>
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
---
If a more knowledgable person can also improve the log message to be more
useful for the user, that’d be much appreciated.

 drivers/scsi/mpt3sas/mpt3sas_scsih.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
index a456e5ec74d8..9c2d3178f384 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
@@ -2703,7 +2703,7 @@ scsih_sdev_configure(struct scsi_device *sdev, struct queue_limits *lim)
 		ssp_target = 1;
 		if (sas_device->device_info &
 				MPI2_SAS_DEVICE_INFO_SEP) {
-			sdev_printk(KERN_WARNING, sdev,
+			sdev_printk(KERN_INFO, sdev,
 			"set ignore_delay_remove for handle(0x%04x)\n",
 			sas_device_priv_data->sas_target->handle);
 			sas_device_priv_data->ignore_delay_remove = 1;
-- 
2.47.2

Re: [PATCH] scsi: mpt3sas: Reduce log level of `set ignore_delay_remove for handle(0x%04x)` to info

[Martin K. Petersen]

Paul,

> On several systems with Dell HBA controller Linux prints the warning below:
>
>     $ dmesg | grep -e "Linux version" -e "DMI: Dell"  -e "ignore_delay_remove"
>     [    0.000000] Linux version 6.12.11.mx64.479 (root@lucy.molgen.mpg.de) (gcc (GCC) 12.3.0, GNU ld (GNU Binutils) 2.41) #1 SMP PREEMPT_DYNAMIC Fri Jan 24 13:30:47 CET 2025
>     [    0.000000] DMI: Dell Inc. PowerEdge R7625/0M7YXP, BIOS 1.10.6 12/06/2024
>     [    9.386551] scsi 0:0:4:0: set ignore_delay_remove for handle(0x0012)
>
> A user does not know, what to do about it, and everything seems to work as
> expected. Therefore, remove the log level from warning to info.

Applied to 6.15/scsi-staging, thanks!

-- 
Martin K. Petersen	Oracle Linux Engineering

Re: [PATCH] scsi: mpt3sas: Reduce log level of `set ignore_delay_remove for handle(0x%04x)` to info

[Martin K. Petersen]

On Fri, 31 Jan 2025 18:16:40 +0100, Paul Menzel wrote:

> On several systems with Dell HBA controller Linux prints the warning below:
> 
>     $ dmesg | grep -e "Linux version" -e "DMI: Dell"  -e "ignore_delay_remove"
>     [    0.000000] Linux version 6.12.11.mx64.479 (root@lucy.molgen.mpg.de) (gcc (GCC) 12.3.0, GNU ld (GNU Binutils) 2.41) #1 SMP PREEMPT_DYNAMIC Fri Jan 24 13:30:47 CET 2025
>     [    0.000000] DMI: Dell Inc. PowerEdge R7625/0M7YXP, BIOS 1.10.6 12/06/2024
>     [    9.386551] scsi 0:0:4:0: set ignore_delay_remove for handle(0x0012)
> 
> [...]

Applied to 6.15/scsi-queue, thanks!

[1/1] scsi: mpt3sas: Reduce log level of `set ignore_delay_remove for handle(0x%04x)` to info
      https://git.kernel.org/mkp/scsi/c/fb27da6e06a0

-- 
Martin K. Petersen	Oracle Linux Engineering