mirror of https://lore.kernel.org/linux-amlogic/
 help / color / mirror / Atom feed
From: narmstrong@baylibre.com (Neil Armstrong)
To: linus-amlogic@lists.infradead.org
Subject: [PATCH v3 u-boot 1/3] usb: host: Add simple of glue driver for DWC3 USB Controllers integration
Date: Wed, 11 Apr 2018 17:08:00 +0200	[thread overview]
Message-ID: <1523459282-12235-2-git-send-email-narmstrong@baylibre.com> (raw)
In-Reply-To: <1523459282-12235-1-git-send-email-narmstrong@baylibre.com>

This is a port of the dwc3-of-simple driver from Linux to enable/deassert
clock and resets of a simple DWC3 Controller HW glue.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 drivers/usb/host/Kconfig          |   7 +++
 drivers/usb/host/Makefile         |   1 +
 drivers/usb/host/dwc3-of-simple.c | 109 ++++++++++++++++++++++++++++++++++++++
 3 files changed, 117 insertions(+)
 create mode 100644 drivers/usb/host/dwc3-of-simple.c

diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index a7249b7..6caa615 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -21,6 +21,13 @@ config USB_XHCI_DWC3
 	  Say Y or if your system has a Dual Role SuperSpeed
 	  USB controller based on the DesignWare USB3 IP Core.
 
+config USB_XHCI_DWC3_OF_SIMPLE
+	bool "DesignWare USB3 DRD Generic OF Simple Glue Layer"
+	select MISC
+	help
+	  Support USB2/3 functionality in simple SoC integrations with
+	  USB controller based on the DesignWare USB3 IP Core.
+
 config USB_XHCI_MVEBU
 	bool "MVEBU USB 3.0 support"
 	default y
diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
index 9819489..abe4f90 100644
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -49,6 +49,7 @@ obj-$(CONFIG_USB_EHCI_ZYNQ) += ehci-zynq.o
 # xhci
 obj-$(CONFIG_USB_XHCI_HCD) += xhci.o xhci-mem.o xhci-ring.o
 obj-$(CONFIG_USB_XHCI_DWC3) += xhci-dwc3.o
+obj-$(CONFIG_USB_XHCI_DWC3_OF_SIMPLE) += dwc3-of-simple.o
 obj-$(CONFIG_USB_XHCI_ROCKCHIP) += xhci-rockchip.o
 obj-$(CONFIG_USB_XHCI_ZYNQMP) += xhci-zynqmp.o
 obj-$(CONFIG_USB_XHCI_KEYSTONE) += xhci-keystone.o
diff --git a/drivers/usb/host/dwc3-of-simple.c b/drivers/usb/host/dwc3-of-simple.c
new file mode 100644
index 0000000..54a5f60
--- /dev/null
+++ b/drivers/usb/host/dwc3-of-simple.c
@@ -0,0 +1,109 @@
+/*
+ * dwc3-of-simple.c - OF glue layer for simple integrations
+ *
+ * Copyright (c) 2015 Texas Instruments Incorporated - http://www.ti.com
+ *
+ * Author: Felipe Balbi <balbi@ti.com>
+ *
+ * Copyright (C) 2018 BayLibre, SAS
+ * Author: Neil Armstrong <narmstron@baylibre.com>
+ *
+ * SPDX-License-Identifier:     GPL-2.0+
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <fdtdec.h>
+#include <reset.h>
+#include <clk.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+struct dwc3_of_simple {
+	struct clk_bulk		clks;
+	struct reset_ctl_bulk	resets;
+};
+
+static int dwc3_of_simple_reset_init(struct udevice *dev,
+				     struct dwc3_of_simple *simple)
+{
+	int ret;
+
+	ret = reset_get_bulk(dev, &simple->resets);
+	if (ret == -ENOTSUPP)
+		return 0;
+	else if (ret)
+		return ret;
+
+	ret = reset_deassert_bulk(&simple->resets);
+	if (ret) {
+		reset_release_bulk(&simple->resets);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int dwc3_of_simple_clk_init(struct udevice *dev,
+				   struct dwc3_of_simple *simple)
+{
+	int ret;
+
+	ret = clk_get_bulk(dev, &simple->clks);
+	if (ret == -ENOTSUPP)
+		return 0;
+	if (ret)
+		return ret;
+
+#if CONFIG_IS_ENABLED(CLK)
+	ret = clk_enable_bulk(&simple->clks);
+	if (ret) {
+		clk_release_bulk(&simple->clks);
+		return ret;
+	}
+#endif
+
+	return 0;
+}
+
+static int dwc3_of_simple_probe(struct udevice *dev)
+{
+	struct dwc3_of_simple *simple = dev_get_platdata(dev);
+	int ret;
+
+	ret = dwc3_of_simple_clk_init(dev, simple);
+	if (ret)
+		return ret;
+
+	ret = dwc3_of_simple_reset_init(dev, simple);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static int dwc3_of_simple_remove(struct udevice *dev)
+{
+	struct dwc3_of_simple *simple = dev_get_platdata(dev);
+
+	reset_release_bulk(&simple->resets);
+
+	clk_release_bulk(&simple->clks);
+
+	return dm_scan_fdt_dev(dev);
+}
+
+static const struct udevice_id dwc3_of_simple_ids[] = {
+	{ .compatible = "amlogic,meson-gxl-dwc3" },
+	{ }
+};
+
+U_BOOT_DRIVER(dwc3_of_simple) = {
+	.name = "dwc3-of-simple",
+	.id = UCLASS_SIMPLE_BUS,
+	.of_match = dwc3_of_simple_ids,
+	.probe = dwc3_of_simple_probe,
+	.remove = dwc3_of_simple_remove,
+	.platdata_auto_alloc_size = sizeof(struct dwc3_of_simple),
+	.flags = DM_FLAG_ALLOC_PRIV_DMA,
+};
-- 
2.7.4

  reply	other threads:[~2018-04-11 15:08 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-04-11 15:07 [PATCH v3 u-boot 0/3] Add USB Support for Amlogic Meson GXL SoCs Neil Armstrong
2018-04-11 15:08 ` Neil Armstrong [this message]
2018-04-11 16:17   ` [U-Boot] [PATCH v3 u-boot 1/3] usb: host: Add simple of glue driver for DWC3 USB Controllers integration Jean-Jacques Hiblot
2018-04-12  8:05     ` Neil Armstrong
2018-04-12  8:07       ` Ben Dooks
2018-04-12  8:08         ` Neil Armstrong
2018-04-11 15:08 ` [PATCH v3 u-boot 2/3] usb: host: dwc3: Add support for multiple PHYs Neil Armstrong
2018-04-11 15:08 ` [PATCH v3 u-boot 3/3] phy: Add Amlogic Meson USB2 & USB3 Generic PHY drivers Neil Armstrong
2018-04-11 15:20 ` [PATCH v3 u-boot 0/3] Add USB Support for Amlogic Meson GXL SoCs Marek Vasut

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1523459282-12235-2-git-send-email-narmstrong@baylibre.com \
    --to=narmstrong@baylibre.com \
    --cc=linus-amlogic@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®