From: ben.dooks@codethink.co.uk (Ben Dooks)
To: linus-amlogic@lists.infradead.org
Subject: [U-Boot] [PATCH v3 u-boot 1/3] usb: host: Add simple of glue driver for DWC3 USB Controllers integration
Date: Thu, 12 Apr 2018 09:07:40 +0100 [thread overview]
Message-ID: <f4963195-8279-a22d-9a9f-6ee6fa740bc7@codethink.co.uk> (raw)
In-Reply-To: <873d3df8-787e-27ec-3d66-73d723ee7ddb@baylibre.com>
On 12/04/18 09:05, Neil Armstrong wrote:
> Hi Jean-Jacques,
>
> On 11/04/2018 18:17, Jean-Jacques Hiblot wrote:
>>
>>
>> On 11/04/2018 17:08, Neil Armstrong wrote:
>>> This is a port of the dwc3-of-simple driver from Linux to enable/deassert
>>> clock and resets of a simple DWC3 Controller HW glue.
>>>
>>> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
>>> ---
>>> ? drivers/usb/host/Kconfig????????? |?? 7 +++
>>> ? drivers/usb/host/Makefile???????? |?? 1 +
>>> ? drivers/usb/host/dwc3-of-simple.c | 109 ++++++++++++++++++++++++++++++++++++++
>>> ? 3 files changed, 117 insertions(+)
>>> ? create mode 100644 drivers/usb/host/dwc3-of-simple.c
>>>
>>> diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
>>> index a7249b7..6caa615 100644
>>> --- a/drivers/usb/host/Kconfig
>>> +++ b/drivers/usb/host/Kconfig
>>> @@ -21,6 +21,13 @@ config USB_XHCI_DWC3
> [...]
>
>>> +
>>> +static int dwc3_of_simple_clk_init(struct udevice *dev,
>>> +?????????????????? struct dwc3_of_simple *simple)
>>> +{
>>> +??? int ret;
>>> +
>>> +??? ret = clk_get_bulk(dev, &simple->clks);
>>> +??? if (ret == -ENOTSUPP)
>>
>> Must be ENOSYS instead of ENOTSUPP, otherwise probe fails on platform not using the clk framework
>
> You are right, I naively used the same between reset and clock...
>
>>
>> tested-by: Jean-Jacques hiblot <jjhiblot@ti.com>
>>
>>> +??????? return 0;
>>> +??? if (ret)
>>> +??????? return ret;
>>> +
>>> +#if CONFIG_IS_ENABLED(CLK)
>>> +??? ret = clk_enable_bulk(&simple->clks);
>>> +??? if (ret) {
>>> +??????? clk_release_bulk(&simple->clks);
>>> +??????? return ret;
>>> +??? }
>>> +#endif
>>> +
>>> +??? return 0;
>>> +}
Is the above #if CONFIG_IS_ENABLED(CLK) avoidable?
>
> [...]
> Thanks,
> Neil
>
> _______________________________________________
> linux-amlogic mailing list
> linux-amlogic at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-amlogic
>
--
Ben Dooks http://www.codethink.co.uk/
Senior Engineer Codethink - Providing Genius
next prev parent reply other threads:[~2018-04-12 8:07 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-04-11 15:07 [PATCH v3 u-boot 0/3] Add USB Support for Amlogic Meson GXL SoCs Neil Armstrong
2018-04-11 15:08 ` [PATCH v3 u-boot 1/3] usb: host: Add simple of glue driver for DWC3 USB Controllers integration Neil Armstrong
2018-04-11 16:17 ` [U-Boot] " Jean-Jacques Hiblot
2018-04-12 8:05 ` Neil Armstrong
2018-04-12 8:07 ` Ben Dooks [this message]
2018-04-12 8:08 ` Neil Armstrong
2018-04-11 15:08 ` [PATCH v3 u-boot 2/3] usb: host: dwc3: Add support for multiple PHYs Neil Armstrong
2018-04-11 15:08 ` [PATCH v3 u-boot 3/3] phy: Add Amlogic Meson USB2 & USB3 Generic PHY drivers Neil Armstrong
2018-04-11 15:20 ` [PATCH v3 u-boot 0/3] Add USB Support for Amlogic Meson GXL SoCs Marek Vasut
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=f4963195-8279-a22d-9a9f-6ee6fa740bc7@codethink.co.uk \
--to=ben.dooks@codethink.co.uk \
--cc=linus-amlogic@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®