[PATCH v3 8/9] ARM64: dts: amlogic: add the ethernet TX delay configuration

mirror of https://lore.kernel.org/linux-amlogic/
 help / color / mirror / Atom feed

From: narmstrong@baylibre.com (Neil Armstrong)
To: linus-amlogic@lists.infradead.org
Subject: [PATCH v3 8/9] ARM64: dts: amlogic: add the ethernet TX delay configuration
Date: Fri, 20 Jan 2017 17:34:44 +0100	[thread overview]
Message-ID: <1845313e-d90d-4426-e41c-ac72673f7339@baylibre.com> (raw)
In-Reply-To: <20170120152232.13943-9-martin.blumenstingl@googlemail.com>

On 01/20/2017 04:22 PM, Martin Blumenstingl wrote:
> This adds the amlogic,tx-delay-ns property with the old (hardcoded)
> default value of 2ns to all boards which are using an RGMII ethernet
> PHY.
> 
> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
> ---
>  arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts    | 2 ++
>  arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts        | 2 ++
>  arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi   | 2 ++
>  arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dts   | 2 ++
>  arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts | 2 ++
>  arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts   | 2 ++
>  arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts    | 2 ++
>  arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts         | 2 ++
>  8 files changed, 16 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
> index 6b5579522587..e63ed98d6c25 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
> @@ -154,6 +154,8 @@
>  	phy-handle = <&eth_phy0>;
>  	phy-mode = "rgmii";
>  
> +	amlogic,tx-delay-ns = <2>;
> +
>  	snps,reset-gpio = <&gpio GPIOZ_14 0>;
>  	snps,reset-delays-us = <0 10000 1000000>;
>  	snps,reset-active-low;
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts
> index fa0f84cfeaa9..6c7e914e9bd9 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts
> @@ -58,6 +58,8 @@
>  	phy-handle = <&eth_phy0>;
>  	phy-mode = "rgmii";
>  
> +	amlogic,tx-delay-ns = <2>;
> +
>  	snps,reset-gpio = <&gpio GPIOZ_14 0>;
>  	snps,reset-delays-us = <0 10000 1000000>;
>  	snps,reset-active-low;
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
> index 358ab5159bd5..4301ad860a76 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
> @@ -131,6 +131,8 @@
>  	phy-handle = <&eth_phy0>;
>  	phy-mode = "rgmii";
>  
> +	amlogic,tx-delay-ns = <2>;
> +
>  	snps,reset-gpio = <&gpio GPIOZ_14 0>;
>  	snps,reset-delays-us = <0 10000 1000000>;
>  	snps,reset-active-low;
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dts
> index 47fe4e444f33..f6d8c70a26a2 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dts
> @@ -72,6 +72,8 @@
>  	phy-handle = <&eth_phy0>;
>  	phy-mode = "rgmii";
>  
> +	amlogic,tx-delay-ns = <2>;
> +
>  	snps,reset-gpio = <&gpio GPIOZ_14 0>;
>  	snps,reset-delays-us = <0 10000 1000000>;
>  	snps,reset-active-low;
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts
> index 9a8e2f492b97..1a222ce60a30 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts
> @@ -94,6 +94,8 @@
>  	phy-handle = <&eth_phy0>;
>  	phy-mode = "rgmii";
>  
> +	amlogic,tx-delay-ns = <2>;
> +
>  	snps,reset-gpio = <&gpio GPIOZ_14 0>;
>  	snps,reset-delays-us = <0 10000 1000000>;
>  	snps,reset-active-low;
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts
> index f66939cacd37..7663d6775823 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts
> @@ -59,6 +59,8 @@
>  	/* Select external PHY by default */
>  	phy-handle = <&external_phy>;
>  
> +	amlogic,tx-delay-ns = <2>;
> +
>  	/* External PHY reset is shared with internal PHY Led signals */
>  	snps,reset-gpio = <&gpio GPIOZ_14 0>;
>  	snps,reset-delays-us = <0 10000 1000000>;
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts
> index 5a337d339df1..a0bc746adb42 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts
> @@ -162,6 +162,8 @@
>  	/* Select external PHY by default */
>  	phy-handle = <&external_phy>;
>  
> +	amlogic,tx-delay-ns = <2>;
> +
>  	snps,reset-gpio = <&gpio GPIOZ_14 0>;
>  	snps,reset-delays-us = <0 10000 1000000>;
>  	snps,reset-active-low;
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts
> index 5dbc66088355..e6ac39b712b7 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts
> @@ -59,6 +59,8 @@
>  	/* Select external PHY by default */
>  	phy-handle = <&external_phy>;
>  
> +	amlogic,tx-delay-ns = <2>;
> +
>  	/* External PHY reset is shared with internal PHY Led signals */
>  	snps,reset-gpio = <&gpio GPIOZ_14 0>;
>  	snps,reset-delays-us = <0 10000 1000000>;
> 

On :
- Odroid-C2 rev 0.2
- P200
- Wetek Play 2
- Amlogic P230
- Nexbox A1
Tested-by: Neil Armstrong <narmstrong@baylibre.com>

next prev parent reply	other threads:[~2017-01-20 16:34 UTC|newest]

Thread overview: 78+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-12-02 23:47 [PATCH 0/5] meson-gx: reset RGMII PHYs and configure TX delay Martin Blumenstingl
2016-12-02 23:47 ` [PATCH 1/5] ARM64: dts: meson-gx: move the MDIO node to meson-gx Martin Blumenstingl
2016-12-02 23:47 ` [PATCH 2/5] ARM64: dts: meson-gxbb-odroidc2: add reset for the ethernet PHY Martin Blumenstingl
2016-12-02 23:47 ` [PATCH 3/5] ARM64: dts: meson-gxbb-p20x: " Martin Blumenstingl
2017-01-17 19:22   ` Jerome Brunet
2017-01-17 21:26     ` Martin Blumenstingl
2017-01-18 10:36       ` Jerome Brunet
2017-01-18 14:26         ` Martin Blumenstingl
2016-12-02 23:47 ` [PATCH 4/5] ARM64: dts: meson-gxbb-vega-s95: " Martin Blumenstingl
2016-12-02 23:47 ` [PATCH 5/5] ARM64: dts: amlogic: add the ethernet TX delay configuration Martin Blumenstingl
2016-12-17 20:36 ` [PATCH 0/5] meson-gx: reset RGMII PHYs and configure TX delay Martin Blumenstingl
2017-01-09 22:52   ` Kevin Hilman
2017-01-17 19:23 ` Jerome Brunet
2017-01-17 21:09   ` Martin Blumenstingl
2017-01-17 22:26     ` Jerome Brunet
2017-01-17 22:44       ` Martin Blumenstingl
2017-01-18 19:28 ` Kevin Hilman
2017-01-18 19:40   ` Martin Blumenstingl
2017-01-19  9:47     ` Jerome Brunet
2017-01-20 13:26 ` [PATCH v2 0/9] " Martin Blumenstingl
2017-01-20 13:26   ` [PATCH v2 1/9] ARM64: dts: meson-gxbb-odroidc2: add the ethernet PHY's reset GPIO Martin Blumenstingl
2017-01-20 13:26   ` [PATCH v2 2/9] ARM64: dts: meson-gxbb-p201: " Martin Blumenstingl
2017-01-20 13:31     ` Neil Armstrong
2017-01-20 13:33       ` Martin Blumenstingl
2017-01-20 13:26   ` [PATCH v2 3/9] ARM64: dts: meson-gxbb-vega-s95: " Martin Blumenstingl
2017-01-20 13:26   ` [PATCH v2 4/9] ARM64: dts: meson-gxbb-nexbox-a95x: " Martin Blumenstingl
2017-01-20 13:26   ` [PATCH v2 5/9] ARM64: dts: meson-gxbb-wetek-hub: " Martin Blumenstingl
2017-01-20 13:26   ` [PATCH v2 6/9] ARM64: dts: meson-gxbb-wetek-play2: " Martin Blumenstingl
2017-01-20 13:26   ` [PATCH v2 7/9] ARM64: dts: meson-gxbb-p20x: remove the ethernet node Martin Blumenstingl
2017-01-20 13:26   ` [PATCH v2 8/9] ARM64: dts: amlogic: add the ethernet TX delay configuration Martin Blumenstingl
2017-01-20 13:26   ` [PATCH v2 9/9] ARM64: dts: meson-gx: remove the phy-mode property from meson-gx Martin Blumenstingl
2017-01-20 15:22   ` [PATCH v3 0/9] meson-gx: reset RGMII PHYs and configure TX delay Martin Blumenstingl
2017-01-20 15:22     ` [PATCH v3 1/9] ARM64: dts: meson-gxbb-odroidc2: add the ethernet PHY's reset GPIO Martin Blumenstingl
2017-01-20 16:23       ` Neil Armstrong
2017-01-20 15:22     ` [PATCH v3 2/9] ARM64: dts: meson-gxbb-p200: " Martin Blumenstingl
2017-01-20 16:18       ` Andrew Lunn
2017-01-20 16:21       ` Andrew Lunn
2017-01-20 17:07         ` Martin Blumenstingl
2017-01-20 17:46           ` Andrew Lunn
2017-01-22 16:48             ` Martin Blumenstingl
2017-01-20 16:23       ` Neil Armstrong
2017-01-20 15:22     ` [PATCH v3 3/9] ARM64: dts: meson-gxbb-vega-s95: " Martin Blumenstingl
2017-01-20 15:22     ` [PATCH v3 4/9] ARM64: dts: meson-gxbb-nexbox-a95x: " Martin Blumenstingl
2017-01-20 16:23       ` Neil Armstrong
2017-01-20 15:22     ` [PATCH v3 5/9] ARM64: dts: meson-gxbb-wetek-hub: " Martin Blumenstingl
2017-01-20 15:22     ` [PATCH v3 6/9] ARM64: dts: meson-gxbb-wetek-play2: " Martin Blumenstingl
2017-01-20 16:23       ` Neil Armstrong
2017-01-20 15:22     ` [PATCH v3 7/9] ARM64: dts: meson-gxbb-p201: fix ethernet support Martin Blumenstingl
2017-01-20 15:22     ` [PATCH v3 8/9] ARM64: dts: amlogic: add the ethernet TX delay configuration Martin Blumenstingl
2017-01-20 16:34       ` Neil Armstrong [this message]
2017-01-20 15:22     ` [PATCH v3 9/9] ARM64: dts: meson-gx: remove the phy-mode property from meson-gx Martin Blumenstingl
2017-01-20 15:27     ` [PATCH v3 0/9] meson-gx: reset RGMII PHYs and configure TX delay Jerome Brunet
2017-01-20 15:32     ` Martin Blumenstingl
2017-01-20 19:46       ` Kevin Hilman
2017-01-22 18:10     ` [PATCH v4 " Martin Blumenstingl
2017-01-22 18:10       ` [PATCH v4 1/9] ARM64: dts: meson-gxbb-odroidc2: add the ethernet PHY's reset GPIO Martin Blumenstingl
2017-01-22 18:10       ` [PATCH v4 2/9] ARM64: dts: meson-gxbb-p200: " Martin Blumenstingl
2017-01-22 18:10       ` [PATCH v4 3/9] ARM64: dts: meson-gxbb-vega-s95: " Martin Blumenstingl
2017-01-22 18:10       ` [PATCH v4 4/9] ARM64: dts: meson-gxbb-nexbox-a95x: " Martin Blumenstingl
2017-01-22 18:10       ` [PATCH v4 5/9] ARM64: dts: meson-gxbb-wetek-hub: " Martin Blumenstingl
2017-01-22 18:10       ` [PATCH v4 6/9] ARM64: dts: meson-gxbb-wetek-play2: " Martin Blumenstingl
2017-01-22 18:10       ` [PATCH v4 7/9] ARM64: dts: meson-gxbb-p201: fix ethernet support Martin Blumenstingl
2017-01-22 18:10       ` [PATCH v4 8/9] ARM64: dts: amlogic: add the ethernet TX delay configuration Martin Blumenstingl
2017-01-22 18:10       ` [PATCH v4 9/9] ARM64: dts: meson-gx: remove the phy-mode property from meson-gx Martin Blumenstingl
2017-01-23 18:55       ` [PATCH v4 0/9] meson-gx: reset RGMII PHYs and configure TX delay Kevin Hilman
2017-01-23 19:02         ` Martin Blumenstingl
2017-02-19 21:41       ` [PATCH v5 " Martin Blumenstingl
2017-02-19 21:41         ` [PATCH v5 1/9] ARM64: dts: meson-gxbb-odroidc2: add the ethernet PHY's reset GPIO Martin Blumenstingl
2017-02-19 21:41         ` [PATCH v5 2/9] ARM64: dts: meson-gxbb-p200: " Martin Blumenstingl
2017-02-19 21:41         ` [PATCH v5 3/9] ARM64: dts: meson-gxbb-vega-s95: " Martin Blumenstingl
2017-02-19 21:41         ` [PATCH v5 4/9] ARM64: dts: meson-gxbb-nexbox-a95x: " Martin Blumenstingl
2017-02-19 21:41         ` [PATCH v5 5/9] ARM64: dts: meson-gxbb-wetek-hub: " Martin Blumenstingl
2017-02-19 21:41         ` [PATCH v5 6/9] ARM64: dts: meson-gxbb-wetek-play2: " Martin Blumenstingl
2017-02-19 21:41         ` [PATCH v5 7/9] ARM64: dts: meson-gxbb-p201: fix ethernet support Martin Blumenstingl
2017-02-19 21:41         ` [PATCH v5 8/9] ARM64: dts: amlogic: add the ethernet TX delay configuration Martin Blumenstingl
2017-02-19 21:41         ` [PATCH v5 9/9] ARM64: dts: meson-gx: remove the phy-mode property from meson-gx Martin Blumenstingl
2017-02-20  9:08         ` [PATCH v5 0/9] meson-gx: reset RGMII PHYs and configure TX delay Jerome Brunet
2017-03-02 17:02           ` Kevin Hilman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1845313e-d90d-4426-e41c-ac72673f7339@baylibre.com \
    --to=narmstrong@baylibre.com \
    --cc=linus-amlogic@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Be sure your reply has a Subject: header at the top and a blank line before the message body.

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®