From: martin.blumenstingl@googlemail.com (Martin Blumenstingl)
To: linus-amlogic@lists.infradead.org
Subject: [PATCH 0/5] meson-gx: reset RGMII PHYs and configure TX delay
Date: Sat, 3 Dec 2016 00:47:34 +0100 [thread overview]
Message-ID: <20161202234739.22929-1-martin.blumenstingl@googlemail.com> (raw)
This partially fixes the 1000Mbit/s ethernet TX throughput issues (on
networks which are not affected by the EEE problem, as reported here:
[1]).
The actual problem for the TX throughput issues was that the TX delay
was applied twice:
- once "accidentally" by the PHY (this was fixed with [2])
- once by the MAC because there was a hardcoded TX delay (of 2ns),
this will be configurable with the changes from [0]
These are the dts changes which belong to my other series (in v2
these patches were part of the other series, upon request of the
net maintainers I have split the .dts changes into their own series so
we are able to take both through different trees):
"[PATCH net-next v3 0/2] stmmac: dwmac-meson8b: configurable
RGMII TX delay": [0].
Thus this series depends on the ACK for the binding changes in the
other series!
I based these changes on my other series "[PATCH v2 0/2] GXL and GXM
SCPI improvements": [3]
[0] http://lists.infradead.org/pipermail/linux-amlogic/2016-December/001834.html
[1] http://lists.infradead.org/pipermail/linux-amlogic/2016-November/001607.html
[2] http://lists.infradead.org/pipermail/linux-amlogic/2016-November/001707.html
[3] http://lists.infradead.org/pipermail/linux-amlogic/2016-December/001831.html
Martin Blumenstingl (5):
ARM64: dts: meson-gx: move the MDIO node to meson-gx
ARM64: dts: meson-gxbb-odroidc2: add reset for the ethernet PHY
ARM64: dts: meson-gxbb-p20x: add reset for the ethernet PHY
ARM64: dts: meson-gxbb-vega-s95: add reset for the ethernet PHY
ARM64: dts: amlogic: add the ethernet TX delay configuration
arch/arm64/boot/dts/amlogic/meson-gx.dtsi | 6 ++++++
arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts | 17 +++++++++++++++++
arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi | 17 +++++++++++++++++
arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi | 17 +++++++++++++++++
arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts | 2 ++
arch/arm64/boot/dts/amlogic/meson-gxl.dtsi | 6 ------
arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts | 2 ++
arch/arm64/boot/dts/amlogic/meson-gxm-s912-q200.dts | 2 ++
8 files changed, 63 insertions(+), 6 deletions(-)
--
2.10.2
next reply other threads:[~2016-12-02 23:47 UTC|newest]
Thread overview: 78+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-12-02 23:47 Martin Blumenstingl [this message]
2016-12-02 23:47 ` [PATCH 1/5] ARM64: dts: meson-gx: move the MDIO node to meson-gx Martin Blumenstingl
2016-12-02 23:47 ` [PATCH 2/5] ARM64: dts: meson-gxbb-odroidc2: add reset for the ethernet PHY Martin Blumenstingl
2016-12-02 23:47 ` [PATCH 3/5] ARM64: dts: meson-gxbb-p20x: " Martin Blumenstingl
2017-01-17 19:22 ` Jerome Brunet
2017-01-17 21:26 ` Martin Blumenstingl
2017-01-18 10:36 ` Jerome Brunet
2017-01-18 14:26 ` Martin Blumenstingl
2016-12-02 23:47 ` [PATCH 4/5] ARM64: dts: meson-gxbb-vega-s95: " Martin Blumenstingl
2016-12-02 23:47 ` [PATCH 5/5] ARM64: dts: amlogic: add the ethernet TX delay configuration Martin Blumenstingl
2016-12-17 20:36 ` [PATCH 0/5] meson-gx: reset RGMII PHYs and configure TX delay Martin Blumenstingl
2017-01-09 22:52 ` Kevin Hilman
2017-01-17 19:23 ` Jerome Brunet
2017-01-17 21:09 ` Martin Blumenstingl
2017-01-17 22:26 ` Jerome Brunet
2017-01-17 22:44 ` Martin Blumenstingl
2017-01-18 19:28 ` Kevin Hilman
2017-01-18 19:40 ` Martin Blumenstingl
2017-01-19 9:47 ` Jerome Brunet
2017-01-20 13:26 ` [PATCH v2 0/9] " Martin Blumenstingl
2017-01-20 13:26 ` [PATCH v2 1/9] ARM64: dts: meson-gxbb-odroidc2: add the ethernet PHY's reset GPIO Martin Blumenstingl
2017-01-20 13:26 ` [PATCH v2 2/9] ARM64: dts: meson-gxbb-p201: " Martin Blumenstingl
2017-01-20 13:31 ` Neil Armstrong
2017-01-20 13:33 ` Martin Blumenstingl
2017-01-20 13:26 ` [PATCH v2 3/9] ARM64: dts: meson-gxbb-vega-s95: " Martin Blumenstingl
2017-01-20 13:26 ` [PATCH v2 4/9] ARM64: dts: meson-gxbb-nexbox-a95x: " Martin Blumenstingl
2017-01-20 13:26 ` [PATCH v2 5/9] ARM64: dts: meson-gxbb-wetek-hub: " Martin Blumenstingl
2017-01-20 13:26 ` [PATCH v2 6/9] ARM64: dts: meson-gxbb-wetek-play2: " Martin Blumenstingl
2017-01-20 13:26 ` [PATCH v2 7/9] ARM64: dts: meson-gxbb-p20x: remove the ethernet node Martin Blumenstingl
2017-01-20 13:26 ` [PATCH v2 8/9] ARM64: dts: amlogic: add the ethernet TX delay configuration Martin Blumenstingl
2017-01-20 13:26 ` [PATCH v2 9/9] ARM64: dts: meson-gx: remove the phy-mode property from meson-gx Martin Blumenstingl
2017-01-20 15:22 ` [PATCH v3 0/9] meson-gx: reset RGMII PHYs and configure TX delay Martin Blumenstingl
2017-01-20 15:22 ` [PATCH v3 1/9] ARM64: dts: meson-gxbb-odroidc2: add the ethernet PHY's reset GPIO Martin Blumenstingl
2017-01-20 16:23 ` Neil Armstrong
2017-01-20 15:22 ` [PATCH v3 2/9] ARM64: dts: meson-gxbb-p200: " Martin Blumenstingl
2017-01-20 16:18 ` Andrew Lunn
2017-01-20 16:21 ` Andrew Lunn
2017-01-20 17:07 ` Martin Blumenstingl
2017-01-20 17:46 ` Andrew Lunn
2017-01-22 16:48 ` Martin Blumenstingl
2017-01-20 16:23 ` Neil Armstrong
2017-01-20 15:22 ` [PATCH v3 3/9] ARM64: dts: meson-gxbb-vega-s95: " Martin Blumenstingl
2017-01-20 15:22 ` [PATCH v3 4/9] ARM64: dts: meson-gxbb-nexbox-a95x: " Martin Blumenstingl
2017-01-20 16:23 ` Neil Armstrong
2017-01-20 15:22 ` [PATCH v3 5/9] ARM64: dts: meson-gxbb-wetek-hub: " Martin Blumenstingl
2017-01-20 15:22 ` [PATCH v3 6/9] ARM64: dts: meson-gxbb-wetek-play2: " Martin Blumenstingl
2017-01-20 16:23 ` Neil Armstrong
2017-01-20 15:22 ` [PATCH v3 7/9] ARM64: dts: meson-gxbb-p201: fix ethernet support Martin Blumenstingl
2017-01-20 15:22 ` [PATCH v3 8/9] ARM64: dts: amlogic: add the ethernet TX delay configuration Martin Blumenstingl
2017-01-20 16:34 ` Neil Armstrong
2017-01-20 15:22 ` [PATCH v3 9/9] ARM64: dts: meson-gx: remove the phy-mode property from meson-gx Martin Blumenstingl
2017-01-20 15:27 ` [PATCH v3 0/9] meson-gx: reset RGMII PHYs and configure TX delay Jerome Brunet
2017-01-20 15:32 ` Martin Blumenstingl
2017-01-20 19:46 ` Kevin Hilman
2017-01-22 18:10 ` [PATCH v4 " Martin Blumenstingl
2017-01-22 18:10 ` [PATCH v4 1/9] ARM64: dts: meson-gxbb-odroidc2: add the ethernet PHY's reset GPIO Martin Blumenstingl
2017-01-22 18:10 ` [PATCH v4 2/9] ARM64: dts: meson-gxbb-p200: " Martin Blumenstingl
2017-01-22 18:10 ` [PATCH v4 3/9] ARM64: dts: meson-gxbb-vega-s95: " Martin Blumenstingl
2017-01-22 18:10 ` [PATCH v4 4/9] ARM64: dts: meson-gxbb-nexbox-a95x: " Martin Blumenstingl
2017-01-22 18:10 ` [PATCH v4 5/9] ARM64: dts: meson-gxbb-wetek-hub: " Martin Blumenstingl
2017-01-22 18:10 ` [PATCH v4 6/9] ARM64: dts: meson-gxbb-wetek-play2: " Martin Blumenstingl
2017-01-22 18:10 ` [PATCH v4 7/9] ARM64: dts: meson-gxbb-p201: fix ethernet support Martin Blumenstingl
2017-01-22 18:10 ` [PATCH v4 8/9] ARM64: dts: amlogic: add the ethernet TX delay configuration Martin Blumenstingl
2017-01-22 18:10 ` [PATCH v4 9/9] ARM64: dts: meson-gx: remove the phy-mode property from meson-gx Martin Blumenstingl
2017-01-23 18:55 ` [PATCH v4 0/9] meson-gx: reset RGMII PHYs and configure TX delay Kevin Hilman
2017-01-23 19:02 ` Martin Blumenstingl
2017-02-19 21:41 ` [PATCH v5 " Martin Blumenstingl
2017-02-19 21:41 ` [PATCH v5 1/9] ARM64: dts: meson-gxbb-odroidc2: add the ethernet PHY's reset GPIO Martin Blumenstingl
2017-02-19 21:41 ` [PATCH v5 2/9] ARM64: dts: meson-gxbb-p200: " Martin Blumenstingl
2017-02-19 21:41 ` [PATCH v5 3/9] ARM64: dts: meson-gxbb-vega-s95: " Martin Blumenstingl
2017-02-19 21:41 ` [PATCH v5 4/9] ARM64: dts: meson-gxbb-nexbox-a95x: " Martin Blumenstingl
2017-02-19 21:41 ` [PATCH v5 5/9] ARM64: dts: meson-gxbb-wetek-hub: " Martin Blumenstingl
2017-02-19 21:41 ` [PATCH v5 6/9] ARM64: dts: meson-gxbb-wetek-play2: " Martin Blumenstingl
2017-02-19 21:41 ` [PATCH v5 7/9] ARM64: dts: meson-gxbb-p201: fix ethernet support Martin Blumenstingl
2017-02-19 21:41 ` [PATCH v5 8/9] ARM64: dts: amlogic: add the ethernet TX delay configuration Martin Blumenstingl
2017-02-19 21:41 ` [PATCH v5 9/9] ARM64: dts: meson-gx: remove the phy-mode property from meson-gx Martin Blumenstingl
2017-02-20 9:08 ` [PATCH v5 0/9] meson-gx: reset RGMII PHYs and configure TX delay Jerome Brunet
2017-03-02 17:02 ` Kevin Hilman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20161202234739.22929-1-martin.blumenstingl@googlemail.com \
--to=martin.blumenstingl@googlemail.com \
--cc=linus-amlogic@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®