[PATCH v7 0/2] Add support for Amlogic S4 PWM

[PATCH v7 0/2] Add support for Amlogic S4 PWM

[Kelvin Zhang via B4 Relay]

Add support for Amlogic S4 PWM, including the driver and DTS.

Signed-off-by: Kelvin Zhang <kelvin.zhang@amlogic.com>
---
Changes in v7:
- Put devm_add_action_or_reset() into the for loop.
- Remove the error handling of meson_pwm_init_channels_s4().
- Remove the repeated device node 'pwm-a-pins'.
- Some minor fixes and improvements.
- Link to v6: https://lore.kernel.org/r/20240529-s4-pwm-v6-0-270f63049f20@amlogic.com

Changes in v6:
- Rename 'pwm_meson_s4_data' to 'pwm_s4_data'.
- Rename 'meson_pwm_init_channels_meson_s4' to 'meson_pwm_init_channels_s4'.
- Adjust the order of the device nodes according to their unit addresses.
- Some minor improvements.
- Link to v5: https://lore.kernel.org/r/20240521-s4-pwm-v5-0-0c91f5fa32cd@amlogic.com

Changes in v5:
- Add devm_add_action_or_reset for free clk when unloading.
- Replace the underscores of node name with dashes.
- Link to v4: https://lore.kernel.org/r/20240424-s4-pwm-v4-0-ee22effd40d0@amlogic.com

---
Junyi Zhao (2):
      pwm: meson: Add support for Amlogic S4 PWM
      arm64: dts: amlogic: Add Amlogic S4 PWM

 arch/arm64/boot/dts/amlogic/meson-s4.dtsi | 199 ++++++++++++++++++++++++++++++
 drivers/pwm/pwm-meson.c                   |  36 ++++++
 2 files changed, 235 insertions(+)
---
base-commit: 9d99040b1bc8dbf385a8aa535e9efcdf94466e19
change-id: 20240424-s4-pwm-2d709986caee

Best regards,
-- 
Kelvin Zhang <kelvin.zhang@amlogic.com>



_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

[PATCH v7 1/2] pwm: meson: Add support for Amlogic S4 PWM

[Kelvin Zhang via B4 Relay]

From: Junyi Zhao <junyi.zhao@amlogic.com>

Add support for Amlogic S4 PWM.

Signed-off-by: Junyi Zhao <junyi.zhao@amlogic.com>
Signed-off-by: Kelvin Zhang <kelvin.zhang@amlogic.com>
---
 drivers/pwm/pwm-meson.c | 36 ++++++++++++++++++++++++++++++++++++
 1 file changed, 36 insertions(+)

diff --git a/drivers/pwm/pwm-meson.c b/drivers/pwm/pwm-meson.c
index b2f97dfb01bb..4f01847525b2 100644
--- a/drivers/pwm/pwm-meson.c
+++ b/drivers/pwm/pwm-meson.c
@@ -460,6 +460,34 @@ static int meson_pwm_init_channels_meson8b_v2(struct pwm_chip *chip)
 	return meson_pwm_init_clocks_meson8b(chip, mux_parent_data);
 }
 
+static void meson_pwm_s4_put_clk(void *data)
+{
+	struct clk *clk = data;
+
+	clk_put(clk);
+}
+
+static int meson_pwm_init_channels_s4(struct pwm_chip *chip)
+{
+	struct device *dev = pwmchip_parent(chip);
+	struct device_node *np = dev->of_node;
+	struct meson_pwm *meson = to_meson_pwm(chip);
+	int i, ret;
+
+	for (i = 0; i < MESON_NUM_PWMS; i++) {
+		meson->channels[i].clk = of_clk_get(np, i);
+		if (IS_ERR(meson->channels[i].clk)) {
+			ret = PTR_ERR(meson->channels[i].clk);
+			dev_err_probe(dev, ret, "Failed to get clk\n");
+			return ret;
+		}
+		devm_add_action_or_reset(dev, meson_pwm_s4_put_clk,
+					 meson->channels[i].clk);
+	}
+
+	return 0;
+}
+
 static const struct meson_pwm_data pwm_meson8b_data = {
 	.parent_names = { "xtal", NULL, "fclk_div4", "fclk_div3" },
 	.channels_init = meson_pwm_init_channels_meson8b_legacy,
@@ -498,6 +526,10 @@ static const struct meson_pwm_data pwm_meson8_v2_data = {
 	.channels_init = meson_pwm_init_channels_meson8b_v2,
 };
 
+static const struct meson_pwm_data pwm_s4_data = {
+	.channels_init = meson_pwm_init_channels_s4,
+};
+
 static const struct of_device_id meson_pwm_matches[] = {
 	{
 		.compatible = "amlogic,meson8-pwm-v2",
@@ -536,6 +568,10 @@ static const struct of_device_id meson_pwm_matches[] = {
 		.compatible = "amlogic,meson-g12a-ao-pwm-cd",
 		.data = &pwm_g12a_ao_cd_data
 	},
+	{
+		.compatible = "amlogic,meson-s4-pwm",
+		.data = &pwm_s4_data
+	},
 	{},
 };
 MODULE_DEVICE_TABLE(of, meson_pwm_matches);

-- 
2.37.1



_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

Re: [DMARC error][DKIM error] [PATCH v7 1/2] pwm: meson: Add support for Amlogic S4 PWM

[George Stark]

Hello Kelvin, Junyi

On 6/5/24 05:44, Kelvin Zhang via B4 Relay wrote:
> From: Junyi Zhao <junyi.zhao@amlogic.com>
> 
> Add support for Amlogic S4 PWM.
> 
> Signed-off-by: Junyi Zhao <junyi.zhao@amlogic.com>
> Signed-off-by: Kelvin Zhang <kelvin.zhang@amlogic.com>
> ---
>   drivers/pwm/pwm-meson.c | 36 ++++++++++++++++++++++++++++++++++++
>   1 file changed, 36 insertions(+)
> 
> diff --git a/drivers/pwm/pwm-meson.c b/drivers/pwm/pwm-meson.c
> index b2f97dfb01bb..4f01847525b2 100644
> --- a/drivers/pwm/pwm-meson.c
> +++ b/drivers/pwm/pwm-meson.c
> @@ -460,6 +460,34 @@ static int meson_pwm_init_channels_meson8b_v2(struct pwm_chip *chip)
>   	return meson_pwm_init_clocks_meson8b(chip, mux_parent_data);
>   }
>   
> +static void meson_pwm_s4_put_clk(void *data)
> +{
> +	struct clk *clk = data;
> +
> +	clk_put(clk);
> +}
> +
> +static int meson_pwm_init_channels_s4(struct pwm_chip *chip)
> +{
> +	struct device *dev = pwmchip_parent(chip);
> +	struct device_node *np = dev->of_node;
> +	struct meson_pwm *meson = to_meson_pwm(chip);
> +	int i, ret;
> +
> +	for (i = 0; i < MESON_NUM_PWMS; i++) {
> +		meson->channels[i].clk = of_clk_get(np, i);
> +		if (IS_ERR(meson->channels[i].clk)) {
> +			ret = PTR_ERR(meson->channels[i].clk);
> +			dev_err_probe(dev, ret, "Failed to get clk\n");
> +			return ret;
> +		}
> +		devm_add_action_or_reset(dev, meson_pwm_s4_put_clk,
> +					 meson->channels[i].clk);

devm_add_action_or_reset() result should be checked

> +	}
> +
> +	return 0;
> +}

You can rewrite it a bit to always have a single allocation for devm node:

static void meson_pwm_s4_put_clk(void *data)
{
	struct meson_pwm *meson = data;
	int i;

	for (i = 0; i < MESON_NUM_PWMS; i++)
		clk_put(meson->channels[i].clk);
}

static int meson_pwm_init_channels_s4(struct pwm_chip *chip)
{
	struct device *dev = pwmchip_parent(chip);
	struct device_node *np = dev->of_node;
	struct meson_pwm *meson = to_meson_pwm(chip);
	int i, ret;

	ret = devm_add_action(dev, meson_pwm_s4_put_clk, meson);
	if (ret)
		return ret;

	for (i = 0; i < MESON_NUM_PWMS; i++) {
		meson->channels[i].clk = of_clk_get(np, i);
		if (IS_ERR(meson->channels[i].clk)) {
			ret = PTR_ERR(meson->channels[i].clk);
			dev_err_probe(dev, ret, "Failed to get clk\n");
			return ret;
		}
	}

	return 0;
}


-- 
Best regards
George

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

Re: [DMARC error][DKIM error] [PATCH v7 1/2] pwm: meson: Add support for Amlogic S4 PWM

[Jerome Brunet]

On Wed 05 Jun 2024 at 15:12, George Stark <gnstark@salutedevices.com> wrote:

> Hello Kelvin, Junyi
>
> On 6/5/24 05:44, Kelvin Zhang via B4 Relay wrote:
>> From: Junyi Zhao <junyi.zhao@amlogic.com>
>> Add support for Amlogic S4 PWM.
>> Signed-off-by: Junyi Zhao <junyi.zhao@amlogic.com>
>> Signed-off-by: Kelvin Zhang <kelvin.zhang@amlogic.com>
>> ---
>>   drivers/pwm/pwm-meson.c | 36 ++++++++++++++++++++++++++++++++++++
>>   1 file changed, 36 insertions(+)
>> diff --git a/drivers/pwm/pwm-meson.c b/drivers/pwm/pwm-meson.c
>> index b2f97dfb01bb..4f01847525b2 100644
>> --- a/drivers/pwm/pwm-meson.c
>> +++ b/drivers/pwm/pwm-meson.c
>> @@ -460,6 +460,34 @@ static int meson_pwm_init_channels_meson8b_v2(struct pwm_chip *chip)
>>   	return meson_pwm_init_clocks_meson8b(chip, mux_parent_data);
>>   }
>>   +static void meson_pwm_s4_put_clk(void *data)
>> +{
>> +	struct clk *clk = data;
>> +
>> +	clk_put(clk);
>> +}
>> +
>> +static int meson_pwm_init_channels_s4(struct pwm_chip *chip)
>> +{
>> +	struct device *dev = pwmchip_parent(chip);
>> +	struct device_node *np = dev->of_node;
>> +	struct meson_pwm *meson = to_meson_pwm(chip);
>> +	int i, ret;
>> +
>> +	for (i = 0; i < MESON_NUM_PWMS; i++) {
>> +		meson->channels[i].clk = of_clk_get(np, i);
>> +		if (IS_ERR(meson->channels[i].clk)) {
>> +			ret = PTR_ERR(meson->channels[i].clk);
>> +			dev_err_probe(dev, ret, "Failed to get clk\n");
>> +			return ret;
>> +		}
>> +		devm_add_action_or_reset(dev, meson_pwm_s4_put_clk,
>> +					 meson->channels[i].clk);
>
> devm_add_action_or_reset() result should be checked
>
>> +	}
>> +
>> +	return 0;
>> +}
>
> You can rewrite it a bit to always have a single allocation for devm node:
>
> static void meson_pwm_s4_put_clk(void *data)
> {
> 	struct meson_pwm *meson = data;
> 	int i;
>
> 	for (i = 0; i < MESON_NUM_PWMS; i++)
> 		clk_put(meson->channels[i].clk);
> }

This has already been discussed on v6.

This make the code un-necessarily complex and potentially put clock that
have not even been claimed.

>
> static int meson_pwm_init_channels_s4(struct pwm_chip *chip)
> {
> 	struct device *dev = pwmchip_parent(chip);
> 	struct device_node *np = dev->of_node;
> 	struct meson_pwm *meson = to_meson_pwm(chip);
> 	int i, ret;
>
> 	ret = devm_add_action(dev, meson_pwm_s4_put_clk, meson);
> 	if (ret)
> 		return ret;
>
> 	for (i = 0; i < MESON_NUM_PWMS; i++) {
> 		meson->channels[i].clk = of_clk_get(np, i);
> 		if (IS_ERR(meson->channels[i].clk)) {
> 			ret = PTR_ERR(meson->channels[i].clk);
> 			dev_err_probe(dev, ret, "Failed to get clk\n");
> 			return ret;
> 		}
> 	}
>
> 	return 0;
> }

-- 
Jerome

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

[PATCH v7 2/2] arm64: dts: amlogic: Add Amlogic S4 PWM

[Kelvin Zhang via B4 Relay]

From: Junyi Zhao <junyi.zhao@amlogic.com>

Add device nodes for PWM_AB, PWM_CD, PWM_EF, PWM_GH and PWM_IJ
along with GPIO PIN configs of each channel.

Signed-off-by: Junyi Zhao <junyi.zhao@amlogic.com>
Signed-off-by: Kelvin Zhang <kelvin.zhang@amlogic.com>
---
 arch/arm64/boot/dts/amlogic/meson-s4.dtsi | 199 ++++++++++++++++++++++++++++++
 1 file changed, 199 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi
index 10896f9df682..b686eacb9662 100644
--- a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi
@@ -312,6 +312,160 @@ mux {
 					};
 				};
 
+				pwm_a_pins1: pwm-a-pins1 {
+					mux {
+						groups = "pwm_a_d";
+						function = "pwm_a";
+					};
+				};
+
+				pwm_a_pins2: pwm-a-pins2 {
+					mux {
+						groups = "pwm_a_x";
+						function = "pwm_a";
+					};
+				};
+
+				pwm_b_pins1: pwm-b-pins1 {
+					mux {
+						groups = "pwm_b_d";
+						function = "pwm_b";
+					};
+				};
+
+				pwm_b_pins2: pwm-b-pins2 {
+					mux {
+						groups = "pwm_b_x";
+						function = "pwm_b";
+					};
+				};
+
+				pwm_c_pins1: pwm-c-pins1 {
+					mux {
+						groups = "pwm_c_d";
+						function = "pwm_c";
+					};
+				};
+
+				pwm_c_pins2: pwm-c-pins2 {
+					mux {
+						groups = "pwm_c_x";
+						function = "pwm_c";
+					};
+				};
+
+				pwm_d_pins1: pwm-d-pins1 {
+					mux {
+						groups = "pwm_d_d";
+						function = "pwm_d";
+					};
+				};
+
+				pwm_d_pins2: pwm-d-pins2 {
+					mux {
+						groups = "pwm_d_h";
+						function = "pwm_d";
+					};
+				};
+
+				pwm_e_pins1: pwm-e-pins1 {
+					mux {
+						groups = "pwm_e_x";
+						function = "pwm_e";
+					};
+				};
+
+				pwm_e_pins2: pwm-e-pins2 {
+					mux {
+						groups = "pwm_e_z";
+						function = "pwm_e";
+					};
+				};
+
+				pwm_f_pins1: pwm-f-pins1 {
+					mux {
+						groups = "pwm_f_x";
+						function = "pwm_f";
+					};
+				};
+
+				pwm_f_pins2: pwm-f-pins2 {
+					mux {
+						groups = "pwm_f_z";
+						function = "pwm_f";
+					};
+				};
+
+				pwm_g_pins1: pwm-g-pins1 {
+					mux {
+						groups = "pwm_g_d";
+						function = "pwm_g";
+					};
+				};
+
+				pwm_g_pins2: pwm-g-pins2 {
+					mux {
+						groups = "pwm_g_z";
+						function = "pwm_g";
+					};
+				};
+
+				pwm_h_pins: pwm-h-pins {
+					mux {
+						groups = "pwm_h";
+						function = "pwm_h";
+					};
+				};
+
+				pwm_i_pins1: pwm-i-pins1 {
+					mux {
+						groups = "pwm_i_d";
+						function = "pwm_i";
+					};
+				};
+
+				pwm_i_pins2: pwm-i-pins2 {
+					mux {
+						groups = "pwm_i_h";
+						function = "pwm_i";
+					};
+				};
+
+				pwm_j_pins: pwm-j-pins {
+					mux {
+						groups = "pwm_j";
+						function = "pwm_j";
+					};
+				};
+
+				pwm_a_hiz_pins: pwm-a-hiz-pins {
+					mux {
+						groups = "pwm_a_hiz";
+						function = "pwm_a_hiz";
+					};
+				};
+
+				pwm_b_hiz_pins: pwm-b-hiz-pins {
+					mux {
+						groups = "pwm_b_hiz";
+						function = "pwm_b_hiz";
+					};
+				};
+
+				pwm_c_hiz_pins: pwm-c-hiz-pins {
+					mux {
+						groups = "pwm_c_hiz";
+						function = "pwm_c_hiz";
+					};
+				};
+
+				pwm_g_hiz_pins: pwm-g-hiz-pins {
+					mux {
+						groups = "pwm_g_hiz";
+						function = "pwm_g_hiz";
+					};
+				};
+
 				spicc0_pins_x: spicc0-pins_x {
 					mux {
 						groups = "spi_a_mosi_x",
@@ -399,6 +553,51 @@ spicc0: spi@50000 {
 				status = "disabled";
 			};
 
+			pwm_ab: pwm@58000 {
+				compatible = "amlogic,meson-s4-pwm";
+				reg = <0x0 0x58000 0x0 0x24>;
+				clocks = <&clkc_periphs CLKID_PWM_A>,
+					 <&clkc_periphs CLKID_PWM_B>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			pwm_cd: pwm@5a000 {
+				compatible = "amlogic,meson-s4-pwm";
+				reg = <0x0 0x5a000 0x0 0x24>;
+				clocks = <&clkc_periphs CLKID_PWM_C>,
+					 <&clkc_periphs CLKID_PWM_D>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			pwm_ef: pwm@5c000 {
+				compatible = "amlogic,meson-s4-pwm";
+				reg = <0x0 0x5c000 0x0 0x24>;
+				clocks = <&clkc_periphs CLKID_PWM_E>,
+					 <&clkc_periphs CLKID_PWM_F>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			pwm_gh: pwm@5e000 {
+				compatible = "amlogic,meson-s4-pwm";
+				reg = <0x0 0x5e000 0x0 0x24>;
+				clocks = <&clkc_periphs CLKID_PWM_G>,
+					 <&clkc_periphs CLKID_PWM_H>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			pwm_ij: pwm@60000 {
+				compatible = "amlogic,meson-s4-pwm";
+				reg = <0x0 0x60000 0x0 0x24>;
+				clocks = <&clkc_periphs CLKID_PWM_I>,
+					 <&clkc_periphs CLKID_PWM_J>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
 			i2c0: i2c@66000 {
 				compatible = "amlogic,meson-axg-i2c";
 				reg = <0x0 0x66000 0x0 0x20>;

-- 
2.37.1



_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

Re: [DMARC error][DKIM error] [PATCH v7 2/2] arm64: dts: amlogic: Add Amlogic S4 PWM

[George Stark]

Hello Kelvin, Junyi

Reviewed-by: George Stark <gnstark@salutedevices.com>

On 6/5/24 05:44, Kelvin Zhang via B4 Relay wrote:
> From: Junyi Zhao <junyi.zhao@amlogic.com>
> 
> Add device nodes for PWM_AB, PWM_CD, PWM_EF, PWM_GH and PWM_IJ
> along with GPIO PIN configs of each channel.
> 
> Signed-off-by: Junyi Zhao <junyi.zhao@amlogic.com>
> Signed-off-by: Kelvin Zhang <kelvin.zhang@amlogic.com>
> ---
>   arch/arm64/boot/dts/amlogic/meson-s4.dtsi | 199 ++++++++++++++++++++++++++++++
>   1 file changed, 199 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi
> index 10896f9df682..b686eacb9662 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi
> @@ -312,6 +312,160 @@ mux {
>   					};
>   				};
>   
> +				pwm_a_pins1: pwm-a-pins1 {
> +					mux {
> +						groups = "pwm_a_d";
> +						function = "pwm_a";
> +					};
> +				};
> +
> +				pwm_a_pins2: pwm-a-pins2 {
...


-- 
Best regards
George

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic