mirror of https://lore.kernel.org/linux-amlogic/
 help / color / mirror / Atom feed
From: Lucas Tanure <tanure@linux.com>
To: Conor Dooley <conor@kernel.org>, xianwei.zhao@amlogic.com
Cc: Mark Brown <broonie@kernel.org>, Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Neil Armstrong <neil.armstrong@linaro.org>,
	Kevin Hilman <khilman@baylibre.com>,
	Jerome Brunet <jbrunet@baylibre.com>,
	Martin Blumenstingl <martin.blumenstingl@googlemail.com>,
	Andrew Lunn <andrew+netdev@lunn.ch>,
	"David S. Miller" <davem@davemloft.net>,
	Eric Dumazet <edumazet@google.com>,
	Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
	linux-spi@vger.kernel.org, devicetree@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-amlogic@lists.infradead.org, linux-kernel@vger.kernel.org,
	netdev@vger.kernel.org
Subject: Re: [PATCH v2 2/3] dt-bindings: net: meson-dwmac: add T7 support
Date: Sun, 4 Oct 2026 15:06:43 +0100	[thread overview]
Message-ID: <4460ec4a-1a28-4481-a33e-3fe72f68bf58@linux.com> (raw)
In-Reply-To: <20260924-stinger-stoplight-7c327c3225fa@spud>

On 24/09/2026 18:21, Conor Dooley wrote:
> On Thu, Sep 24, 2026 at 05:51:09AM +0000, Xianwei Zhao via B4 Relay wrote:
>> From: Xianwei Zhao <xianwei.zhao@amlogic.com>
>>
>> Add the T7 compatible to the Meson DWMAC binding.
>>
>> The T7 DWMAC controller requires the following compatible combination:
>>
>> amlogic,t7-dwmac
>> amlogic,meson-axg-dwmac
>> snps,dwmac-4.00
>>
>> Add a conditional schema check to enforce this compatible combination
>> when amlogic,t7-dwmac is used.
>>
>> Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
>> ---
>>   .../devicetree/bindings/net/amlogic,meson-dwmac.yaml    | 17 +++++++++++++++++
>>   1 file changed, 17 insertions(+)
>>
>> diff --git a/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml b/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml
>> index 5c91716d1f21..b529ca5577a9 100644
>> --- a/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml
>> +++ b/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml
>> @@ -23,11 +23,24 @@ select:
>>             - amlogic,meson-gxbb-dwmac
>>             - amlogic,meson-axg-dwmac
>>             - amlogic,meson-g12a-dwmac
>> +          - amlogic,t7-dwmac
>>     required:
>>       - compatible
>>   
>>   allOf:
>>     - $ref: snps,dwmac.yaml#
>> +  - if:
>> +      properties:
>> +        compatible:
>> +          contains:
>> +            const: amlogic,t7-dwmac
>> +    then:
>> +      properties:
>> +        compatible:
>> +          items:
>> +            - const: amlogic,t7-dwmac
>> +            - const: amlogic,meson-axg-dwmac
>> +            - const: snps,dwmac-4.00
> 
> This is not how fallback compatibles are described.
> 
> Instead of doing this, which affects all other compatibles in the file
> by allowing dwmac-4.00 for all devices, please do this the normal way.
> dwmac isn't special, it's just this binding that's weird!
> Can whats currently in the binding (before this patch) be largely
> replaced by just doing:
>    compatible:
>      oneOf:
>        - items:
>            - enum:
>                - amlogic,meson8b-dwmac
>                - amlogic,meson-gxbb-dwmac
>                - amlogic,meson-axg-dwmac
>                - amlogic,meson-g12a-dwmac
>            - const: snps,dwmac-3.70a
>            - const: snps,dwmac
>        - items:
>            - enum:
>                - amlogic,meson6-dwmac
>                - amlogic,meson8m2-dwmac
>            - const: snps,dwmac
> 
> You'll have to check this yourself against the amlogic devicetrees and
> see if this is correct, but with this you should be able to add your new
> device without doing anything special.

I have the same patch in my T7 work and checked it against the amlogic 
device trees: meson6 and meson8m2 use the two entry form, the rest add 
snps,dwmac-3.70a. dt_binding_check and dtbs_check are clean. The example 
needs fixing.

Xianwei, from my VIM4: the MAC reports Synopsys ID 0x51, DWMAC_CORE_5_10
in common.h, so the core is 5.10a, not 4.00. And the controller reaches
DRAM through a pipeline stage. Nothing claims its gate, sys_ampipe_eth,
so clk_disable_unused switches it off. My node lists it as a fourth
clock. Does the AN400 differ?

I will send my series today so the code is on the list. Not a race: I
will drop or rebase whatever overlaps once you tell me.

Thanks,
Lucas

> 
> pw-bot: changes-requested
> 
> Thanks,
> Conor.
> 
>>     - if:
>>         properties:
>>           compatible:
>> @@ -38,6 +51,7 @@ allOf:
>>                 - amlogic,meson-gxbb-dwmac
>>                 - amlogic,meson-axg-dwmac
>>                 - amlogic,meson-g12a-dwmac
>> +              - amlogic,t7-dwmac
>>   
>>       then:
>>         properties:
>> @@ -93,6 +107,7 @@ allOf:
>>                 - amlogic,meson8m2-dwmac
>>                 - amlogic,meson-gxbb-dwmac
>>                 - amlogic,meson-axg-dwmac
>> +              - amlogic,t7-dwmac
>>       then:
>>         properties:
>>           rx-internal-delay-ps:
>> @@ -139,8 +154,10 @@ properties:
>>             - amlogic,meson-gxbb-dwmac
>>             - amlogic,meson-axg-dwmac
>>             - amlogic,meson-g12a-dwmac
>> +          - amlogic,t7-dwmac
>>       contains:
>>         enum:
>> +        - snps,dwmac-4.00
>>           - snps,dwmac-3.70a
>>           - snps,dwmac
>>   
>>
>> -- 
>> 2.52.0
>>
>>

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

  reply	other threads:[~2026-10-04 14:06 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-09-24  5:51 [PATCH v2 0/3] t7: add some nodes for Amlogc t7 Xianwei Zhao via B4 Relay
2026-09-24  5:51 ` [PATCH v2 1/3] spi: dt-bindings: amlogic,meson-gx-spicc: add T7 compatible Xianwei Zhao via B4 Relay
2026-09-24  5:51 ` [PATCH v2 2/3] dt-bindings: net: meson-dwmac: add T7 support Xianwei Zhao via B4 Relay
2026-09-24 17:21   ` Conor Dooley
2026-10-04 14:06     ` Lucas Tanure [this message]
2026-10-04 15:35       ` Lucas Tanure
2026-09-24  5:51 ` [PATCH v2 3/3] arm64: dts: amlogic: add T7 peripheral nodes Xianwei Zhao via B4 Relay
2026-09-24 11:33   ` Ronald Claveau
2026-09-25  5:51   ` sashiko-bot
2026-09-28 16:29 ` (subset) [PATCH v2 0/3] t7: add some nodes for Amlogc t7 Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4460ec4a-1a28-4481-a33e-3fe72f68bf58@linux.com \
    --to=tanure@linux.com \
    --cc=andrew+netdev@lunn.ch \
    --cc=broonie@kernel.org \
    --cc=conor+dt@kernel.org \
    --cc=conor@kernel.org \
    --cc=davem@davemloft.net \
    --cc=devicetree@vger.kernel.org \
    --cc=edumazet@google.com \
    --cc=jbrunet@baylibre.com \
    --cc=khilman@baylibre.com \
    --cc=krzk+dt@kernel.org \
    --cc=kuba@kernel.org \
    --cc=linux-amlogic@lists.infradead.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-spi@vger.kernel.org \
    --cc=martin.blumenstingl@googlemail.com \
    --cc=neil.armstrong@linaro.org \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=robh@kernel.org \
    --cc=xianwei.zhao@amlogic.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®