From: Lucas Tanure <tanure@linux.com>
To: Conor Dooley <conor@kernel.org>, xianwei.zhao@amlogic.com
Cc: Mark Brown <broonie@kernel.org>, Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Neil Armstrong <neil.armstrong@linaro.org>,
Kevin Hilman <khilman@baylibre.com>,
Jerome Brunet <jbrunet@baylibre.com>,
Martin Blumenstingl <martin.blumenstingl@googlemail.com>,
Andrew Lunn <andrew+netdev@lunn.ch>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
linux-spi@vger.kernel.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-amlogic@lists.infradead.org, linux-kernel@vger.kernel.org,
netdev@vger.kernel.org
Subject: Re: [PATCH v2 2/3] dt-bindings: net: meson-dwmac: add T7 support
Date: Sun, 4 Oct 2026 16:35:26 +0100 [thread overview]
Message-ID: <54b064f8-8e01-44da-be40-4125620ff9d0@linux.com> (raw)
In-Reply-To: <4460ec4a-1a28-4481-a33e-3fe72f68bf58@linux.com>
On 04/10/2026 15:06, Lucas Tanure wrote:
> On 24/09/2026 18:21, Conor Dooley wrote:
>> On Thu, Sep 24, 2026 at 05:51:09AM +0000, Xianwei Zhao via B4 Relay
>> wrote:
>>> From: Xianwei Zhao <xianwei.zhao@amlogic.com>
>>>
>>> Add the T7 compatible to the Meson DWMAC binding.
>>>
>>> The T7 DWMAC controller requires the following compatible combination:
>>>
>>> amlogic,t7-dwmac
>>> amlogic,meson-axg-dwmac
>>> snps,dwmac-4.00
>>>
>>> Add a conditional schema check to enforce this compatible combination
>>> when amlogic,t7-dwmac is used.
>>>
>>> Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
>>> ---
>>> .../devicetree/bindings/net/amlogic,meson-dwmac.yaml | 17 ++++++
>>> +++++++++++
>>> 1 file changed, 17 insertions(+)
>>>
>>> diff --git a/Documentation/devicetree/bindings/net/amlogic,meson-
>>> dwmac.yaml b/Documentation/devicetree/bindings/net/amlogic,meson-
>>> dwmac.yaml
>>> index 5c91716d1f21..b529ca5577a9 100644
>>> --- a/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml
>>> +++ b/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml
>>> @@ -23,11 +23,24 @@ select:
>>> - amlogic,meson-gxbb-dwmac
>>> - amlogic,meson-axg-dwmac
>>> - amlogic,meson-g12a-dwmac
>>> + - amlogic,t7-dwmac
>>> required:
>>> - compatible
>>> allOf:
>>> - $ref: snps,dwmac.yaml#
>>> + - if:
>>> + properties:
>>> + compatible:
>>> + contains:
>>> + const: amlogic,t7-dwmac
>>> + then:
>>> + properties:
>>> + compatible:
>>> + items:
>>> + - const: amlogic,t7-dwmac
>>> + - const: amlogic,meson-axg-dwmac
>>> + - const: snps,dwmac-4.00
>>
>> This is not how fallback compatibles are described.
>>
>> Instead of doing this, which affects all other compatibles in the file
>> by allowing dwmac-4.00 for all devices, please do this the normal way.
>> dwmac isn't special, it's just this binding that's weird!
>> Can whats currently in the binding (before this patch) be largely
>> replaced by just doing:
>> compatible:
>> oneOf:
>> - items:
>> - enum:
>> - amlogic,meson8b-dwmac
>> - amlogic,meson-gxbb-dwmac
>> - amlogic,meson-axg-dwmac
>> - amlogic,meson-g12a-dwmac
>> - const: snps,dwmac-3.70a
>> - const: snps,dwmac
>> - items:
>> - enum:
>> - amlogic,meson6-dwmac
>> - amlogic,meson8m2-dwmac
>> - const: snps,dwmac
>>
>> You'll have to check this yourself against the amlogic devicetrees and
>> see if this is correct, but with this you should be able to add your new
>> device without doing anything special.
>
> I have the same patch in my T7 work and checked it against the amlogic
> device trees: meson6 and meson8m2 use the two entry form, the rest add
> snps,dwmac-3.70a. dt_binding_check and dtbs_check are clean. The example
> needs fixing.
>
> Xianwei, from my VIM4: the MAC reports Synopsys ID 0x51, DWMAC_CORE_5_10
> in common.h, so the core is 5.10a, not 4.00. And the controller reaches
> DRAM through a pipeline stage. Nothing claims its gate, sys_ampipe_eth,
> so clk_disable_unused switches it off. My node lists it as a fourth
> clock. Does the AN400 differ?
>
> I will send my series today so the code is on the list. Not a race: I
> will drop or rebase whatever overlaps once you tell me.
>
> Thanks,
> Lucas
My Ethernet patches
https://lore.kernel.org/linux-amlogic/20261004144046.391444-1-tanure@linux.com
>
>>
>> pw-bot: changes-requested
>>
>> Thanks,
>> Conor.
>>
>>> - if:
>>> properties:
>>> compatible:
>>> @@ -38,6 +51,7 @@ allOf:
>>> - amlogic,meson-gxbb-dwmac
>>> - amlogic,meson-axg-dwmac
>>> - amlogic,meson-g12a-dwmac
>>> + - amlogic,t7-dwmac
>>> then:
>>> properties:
>>> @@ -93,6 +107,7 @@ allOf:
>>> - amlogic,meson8m2-dwmac
>>> - amlogic,meson-gxbb-dwmac
>>> - amlogic,meson-axg-dwmac
>>> + - amlogic,t7-dwmac
>>> then:
>>> properties:
>>> rx-internal-delay-ps:
>>> @@ -139,8 +154,10 @@ properties:
>>> - amlogic,meson-gxbb-dwmac
>>> - amlogic,meson-axg-dwmac
>>> - amlogic,meson-g12a-dwmac
>>> + - amlogic,t7-dwmac
>>> contains:
>>> enum:
>>> + - snps,dwmac-4.00
>>> - snps,dwmac-3.70a
>>> - snps,dwmac
>>>
>>> --
>>> 2.52.0
>>>
>>>
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
next prev parent reply other threads:[~2026-10-04 15:35 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-24 5:51 [PATCH v2 0/3] t7: add some nodes for Amlogc t7 Xianwei Zhao via B4 Relay
2026-09-24 5:51 ` [PATCH v2 1/3] spi: dt-bindings: amlogic,meson-gx-spicc: add T7 compatible Xianwei Zhao via B4 Relay
2026-09-24 5:51 ` [PATCH v2 2/3] dt-bindings: net: meson-dwmac: add T7 support Xianwei Zhao via B4 Relay
2026-09-24 17:21 ` Conor Dooley
2026-10-04 14:06 ` Lucas Tanure
2026-10-04 15:35 ` Lucas Tanure [this message]
2026-09-24 5:51 ` [PATCH v2 3/3] arm64: dts: amlogic: add T7 peripheral nodes Xianwei Zhao via B4 Relay
2026-09-24 11:33 ` Ronald Claveau
2026-09-25 5:51 ` sashiko-bot
2026-09-28 16:29 ` (subset) [PATCH v2 0/3] t7: add some nodes for Amlogc t7 Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=54b064f8-8e01-44da-be40-4125620ff9d0@linux.com \
--to=tanure@linux.com \
--cc=andrew+netdev@lunn.ch \
--cc=broonie@kernel.org \
--cc=conor+dt@kernel.org \
--cc=conor@kernel.org \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=edumazet@google.com \
--cc=jbrunet@baylibre.com \
--cc=khilman@baylibre.com \
--cc=krzk+dt@kernel.org \
--cc=kuba@kernel.org \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-spi@vger.kernel.org \
--cc=martin.blumenstingl@googlemail.com \
--cc=neil.armstrong@linaro.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=robh@kernel.org \
--cc=xianwei.zhao@amlogic.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®