[PATCH] Bluetooth: btusb: Add RTL8852BE device 0489:e125 to device tables

[PATCH] Bluetooth: btusb: Add RTL8852BE device 0489:e125 to device tables

[Hilda Wu]

Add the support ID(0489:e125) to usb_device_id table for
Realtek RTL8852B chip.

The device info from /sys/kernel/debug/usb/devices as below.

T:  Bus=01 Lev=01 Prnt=01 Port=07 Cnt=03 Dev#=  5 Spd=12   MxCh= 0
D:  Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=0489 ProdID=e125 Rev= 0.00
S:  Manufacturer=Realtek
S:  Product=Bluetooth Radio
S:  SerialNumber=00e04c000001
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms

Signed-off-by: Hilda Wu <hildawu@realtek.com>
---
 drivers/bluetooth/btusb.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 79aefdb3324d..2d7d47f9d007 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -555,6 +555,8 @@ static const struct usb_device_id quirks_table[] = {
 						     BTUSB_WIDEBAND_SPEECH },
 	{ USB_DEVICE(0x13d3, 0x3572), .driver_info = BTUSB_REALTEK |
 						     BTUSB_WIDEBAND_SPEECH },
+	{ USB_DEVICE(0x0489, 0xe125), .driver_info = BTUSB_REALTEK |
+						     BTUSB_WIDEBAND_SPEECH },
 
 	/* Realtek 8852BT/8852BE-VT Bluetooth devices */
 	{ USB_DEVICE(0x0bda, 0x8520), .driver_info = BTUSB_REALTEK |
-- 
2.34.1

Re: [PATCH] Bluetooth: btusb: Add RTL8852BE device 0489:e125 to device tables

[Paul Menzel]

Dear Hilda,


Thank you for your patch.

Am 17.06.24 um 10:21 schrieb Hilda Wu:
> Add the support ID(0489:e125) to usb_device_id table for

Please add a space before (.

> Realtek RTL8852B chip.
> 
> The device info from /sys/kernel/debug/usb/devices as below.

[…]

> Signed-off-by: Hilda Wu <hildawu@realtek.com>
> ---
>   drivers/bluetooth/btusb.c | 2 ++
>   1 file changed, 2 insertions(+)
> 
> diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
> index 79aefdb3324d..2d7d47f9d007 100644
> --- a/drivers/bluetooth/btusb.c
> +++ b/drivers/bluetooth/btusb.c
> @@ -555,6 +555,8 @@ static const struct usb_device_id quirks_table[] = {
>   						     BTUSB_WIDEBAND_SPEECH },
>   	{ USB_DEVICE(0x13d3, 0x3572), .driver_info = BTUSB_REALTEK |
>   						     BTUSB_WIDEBAND_SPEECH },
> +	{ USB_DEVICE(0x0489, 0xe125), .driver_info = BTUSB_REALTEK |
> +						     BTUSB_WIDEBAND_SPEECH },

Please put it at the beginning of the list for the 8852BE devices to 
kind of sort it.

>   
>   	/* Realtek 8852BT/8852BE-VT Bluetooth devices */
>   	{ USB_DEVICE(0x0bda, 0x8520), .driver_info = BTUSB_REALTEK |


Kind regards,

Paul