From: "Milan Roubal" <roubm9am@barbora.ms.mff.cuni.cz>
To: "Samuel Flory" <sflory@rackable.com>,
"Alan Cox" <alan@lxorguk.ukuu.org.uk>,
"David van Hoose" <davidvh@cox.net>
Cc: <linux-kernel@vger.kernel.org>, <mru@users.sourceforge.net>
Subject: Re: Promise SATA 150 TX2 plus
Date: Thu, 10 Jul 2003 04:36:55 +0200 [thread overview]
Message-ID: <05d901c3468c$20f133f0$401a71c3@izidor> (raw)
In-Reply-To: <3F0CB842.2050102@rackable.com>
Some new info about my problem - when there is no disk drive connected,
the drives loads cleanly. But when I connect the PATA drive (I don't have
currently
SATA disk drive free for testing) I got this message. I got clean SuSE 8.0
installed.
I will write this to promise, any idea what could be wrong? This is the
original promise
driver, now I am going to try the other driver.
Thank you for the answer
Milan Roubal
PROMISE SATA150 Series Linux Driver v1.00.0.6
PCI: Found IRQ 10 for device 02:04.0
Drive 5 - WDC WD1000JB-32CWE0 195371567s 100030MB UDMA5
scsi1 : pdc-ultra
scsi: unknown type 31
Vendor: ST 0123 Model: 456789ABCDEFGHIJ Rev: KLMN
Type: Unknown ANSI SCSI revision: 07
scsi: unknown type 31
Vendor: ST 0123 Model: 456789ABCDEFGHIJ Rev: KLMN
Type: Unknown ANSI SCSI revision: 07
scsi: unknown type 31
Vendor: ST 0123 Model: 456789ABCDEFGHIJ Rev: KLMN
Type: Unknown ANSI SCSI revision: 07
scsi: unknown type 31
Vendor: ST 0123 Model: 456789ABCDEFGHIJ Rev: KLMN
Type: Unknown ANSI SCSI revision: 07
Vendor: Model: WDC WD1000JB-32C Rev:
Type: Direct-Access ANSI SCSI revision: 02
Vendor: Model: WDC WD1000JB-32C Rev:
Type: Direct-Access ANSI SCSI revision: 02
Vendor: Model: WDC WD1000JB-32C Rev:
Type: Direct-Access ANSI SCSI revision: 02
Vendor: Model: WDC WD1000JB-32C Rev:
Type: Direct-Access ANSI SCSI revision: 02
Attached scsi generic sg1 at scsi1, channel 0, id 0, lun 0, type 31
Attached scsi generic sg2 at scsi1, channel 0, id 1, lun 0, type 31
Attached scsi generic sg3 at scsi1, channel 0, id 2, lun 0, type 31
Attached scsi generic sg4 at scsi1, channel 0, id 3, lun 0, type 31
Attached scsi disk sda at scsi1, channel 0, id 4, lun 0
Attached scsi disk sdb at scsi1, channel 0, id 5, lun 0
Attached scsi disk sdc at scsi1, channel 0, id 6, lun 0
Attached scsi disk sdd at scsi1, channel 0, id 7, lun 0
resize_dma_pool: unknown device type 31
resize_dma_pool: unknown device type 31
resize_dma_pool: unknown device type 31
resize_dma_pool: unknown device type 31
SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB)
sda:kernel BUG at <bad filename>:14979!
invalid operand: 0000
CPU: 0
EIP: 0010:[<c6880146>] Not tainted
EFLAGS: 00010046
eax: 0685a000 ebx: 00000018 ecx: c009e000 edx: c009e018
esi: 00000003 edi: 00000004 ebp: c685b400 esp: c69afc44
ds: 0018 es: 0018 ss: 0018
Process modprobe (pid: 443, stackpage=c69af000)
Stack: c685b400 c033f000 c009e000 c31ea61c c1000020 00000004 c688296c
c1792800
c685b400 00000293 c686dc58 c685b400 c31ea5a0 00000000 c68cf480
c1818000
c009e000 c01b45ea c686dc00 00000001 00000002 00000800 c68cf480
c009e000
Call Trace: [<c688296c>] [<c01b45ea>] [<c01e3f7d>] [<c01e0b82>] [<c01e56e8>]
[<c01e6f2f>] [<c01b3c88>] [<c011d02c>] [<c013aa9e>] [<c0129508>]
[<c012954c>]
[<c012b7f6>] [<c0157fe6>] [<c013c22c>] [<c0158e2e>] [<c0159022>]
[<c014947a>]
[<c013c5ae>] [<c0157e14>] [<c01195f3>] [<c01eb731>] [<c0157f79>]
[<c0157eb7>]
[<c01ebdb5>] [<c688006a>] [<c01e1bdf>] [<c688a2a0>] [<c688006a>]
[<c688006a>]
[<c01e2206>] [<c688a2a0>] [<c6882e1e>] [<c688a2a0>] [<c011a10d>]
[<c6880060>]
[<c0108833>]
Code: 0f 0b 83 3a 00 74 13 8b 02 05 00 00 00 40 89 42 0c c7 42 10
next prev parent reply other threads:[~2003-07-10 2:22 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-07-09 13:16 Mitch
2003-07-09 13:34 ` Milan Roubal
2003-07-09 14:11 ` mru
2003-07-09 14:51 ` Milan Roubal
2003-07-09 17:58 ` Matthias Schniedermeyer
2003-07-10 0:06 ` Milan Roubal
2003-07-10 0:20 ` Alan Cox
2003-07-10 0:37 ` Milan Roubal
2003-07-10 6:35 ` Matthias Schniedermeyer
2003-07-09 18:22 ` Samuel Flory
2003-07-09 23:54 ` Milan Roubal
2003-07-10 0:15 ` Samuel Flory
2003-07-10 0:30 ` Milan Roubal
2003-07-10 0:50 ` Samuel Flory
2003-07-10 2:36 ` Milan Roubal [this message]
2003-07-09 15:08 ` Larry McVoy
2003-07-09 15:19 ` mru
2003-07-09 16:16 ` Larry McVoy
2003-07-10 0:08 ` Milan Roubal
2003-07-09 19:56 ` Marcel J.E. Mol
2003-07-09 23:48 ` Milan Roubal
-- strict thread matches above, loose matches on Subject: below --
2003-07-09 12:57 Milan Roubal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='05d901c3468c$20f133f0$401a71c3@izidor' \
--to=roubm9am@barbora.ms.mff.cuni.cz \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=davidvh@cox.net \
--cc=linux-kernel@vger.kernel.org \
--cc=mru@users.sourceforge.net \
--cc=sflory@rackable.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®