Re: [PATCH] firmware/raspberrypi: raise timeout to 3s

[Stefan Wahren <wahrenst@gmx.net>]

Hi Etienne,

Am 15.05.25 um 13:48 schrieb Etienne Buira:
> On Thu, May 15, 2025 at 12:31:38PM +0200, Stefan Wahren wrote:
>> Am 15.05.25 um 11:44 schrieb Etienne Buira:
>>> Hi Stefan, and thank you for your interest.
>>>
>>> On Thu, May 15, 2025 at 09:42:43AM +0200, Stefan Wahren wrote:
>>>> Hi Etienne,
>>>>
>>>> Am 15.05.25 um 08:41 schrieb Etienne Buira:
>>>>> On Wed, May 14, 2025 at 06:20:32PM +0200, Stefan Wahren wrote:
>>>>>> Hi Etienne,
>>>>>>
>>>>>> Am 12.05.25 um 18:30 schrieb Etienne Buira:
>>>>> ../..
>>>>>> Out of curiosity and because i never saw this issue, could you please
>>>>>> provide more details?
>>>>>> There is nothing connected to HDMI 0 & 1 ?
>>>>>> Which firmware version are you running?
>>>> Please provide the dmesg output, so we can extract the firmware version.
>>> Firmware version is 2025-02-17T20:03:07, i also attach the full gzipped
>>> dmesg, as long as a patch of extra traces used.
>>> I did not specifically test other firmware versions for the timeout
>>> issue (but i did for video output).
>> Thanks, i'll try to reproduce.
>>
>> Sorry, i forgot but is this reproducible with a recent stable 6.12.x kernel?
> Just reproduced with pristine 6.12.28.
>
okay, i've update the firmware on my older Raspberry Pi 4 to the same 
version as yours. But even with your configuration i don't see this kind 
of fallout. So I think we shouldn't apply this patch until we really 
know what's going on.

You don't have another Raspberry Pi 4 by any chance?
Another cause might be the toolchain. Currently I use a not so fresh gcc 
11.3.1 from Linaro.

Except of this, I noticed that your configuration doesn't enable 
DWC2_DUAL_ROLE and the LEDS_TRIGGER.

Best regards