Re: [PATCH] firmware/raspberrypi: raise timeout to 3s

[Stefan Wahren <wahrenst@gmx.net>]

Am 16.05.25 um 00:27 schrieb Etienne Buira:
> Hi Stefan
>
> On Thu, May 15, 2025 at 07:48:04PM +0200, Stefan Wahren wrote:
>> Hi Etienne,
>>
>> Am 15.05.25 um 13:48 schrieb Etienne Buira:
>>> On Thu, May 15, 2025 at 12:31:38PM +0200, Stefan Wahren wrote:
>>>> Am 15.05.25 um 11:44 schrieb Etienne Buira:
>>>>> Hi Stefan, and thank you for your interest.
>>>>>
>>>>> On Thu, May 15, 2025 at 09:42:43AM +0200, Stefan Wahren wrote:
>>>>>> Hi Etienne,
>>>>>>
>>>>>> Am 15.05.25 um 08:41 schrieb Etienne Buira:
>>>>>>> On Wed, May 14, 2025 at 06:20:32PM +0200, Stefan Wahren wrote:
>>>>>>>> Hi Etienne,
>>>>>>>>
>>>>>>>> Am 12.05.25 um 18:30 schrieb Etienne Buira:
>>>>>>> ../..
>>>>>>>> Out of curiosity and because i never saw this issue, could you please
>>>>>>>> provide more details?
>>>>>>>> There is nothing connected to HDMI 0 & 1 ?
>>>>>>>> Which firmware version are you running?
>>>>>> Please provide the dmesg output, so we can extract the firmware version.
>>>>> Firmware version is 2025-02-17T20:03:07, i also attach the full gzipped
>>>>> dmesg, as long as a patch of extra traces used.
>>>>> I did not specifically test other firmware versions for the timeout
>>>>> issue (but i did for video output).
>>>> Thanks, i'll try to reproduce.
>>>>
>>>> Sorry, i forgot but is this reproducible with a recent stable 6.12.x kernel?
>>> Just reproduced with pristine 6.12.28.
>>>
>> okay, i've update the firmware on my older Raspberry Pi 4 to the same
>> version as yours. But even with your configuration i don't see this kind
>> of fallout. So I think we shouldn't apply this patch until we really
>> know what's going on.
> Ok, thank you, did you make sure a powered hdmi sink were connected? I
> noticed there is no timeout if no hdmi is plugged (but there were when
> monitor were powered off, maybe specific to my monitor).
Yes, HDMI monitor was connected to HDMI 0 and powered on. Raspberry Pi 
OS started as expected.

The fact that your SDIO interface triggers a warning, which I also don't 
get let me think this is not just related to HDMI interface.

[    3.603736] mmc0: sdhci: ============ SDHCI REGISTER DUMP ===========
[    3.603739] mmc0: sdhci: Sys addr:  0x00000000 | Version: 0x00009902
[    3.646852] mmc0: sdhci: Blk size:  0x00000000 | Blk cnt: 0x00000000
[    3.646856] mmc0: sdhci: Argument:  0x00000000 | Trn mode: 0x00000000
[    3.646859] mmc0: sdhci: Present:   0x01ff0001 | Host ctl: 0x00000000
[    3.665697] mmc0: sdhci: Power:     0x0000000f | Blk gap: 0x00000000
[    3.672214] mmc0: sdhci: Wake-up:   0x00000000 | Clock: 0x00003947
[    3.678736] mmc0: sdhci: Timeout:   0x00000000 | Int stat: 0x00000000
[    3.685254] mmc0: sdhci: Int enab:  0x00ff0003 | Sig enab: 0x00ff0003
[    3.685257] mmc0: sdhci: ACmd stat: 0x00000000 | Slot int: 0x00000000
[    3.685260] mmc0: sdhci: Caps:      0x00000000 | Caps_1: 0x00000000
[    3.712672] mmc0: sdhci: Cmd:       0x00000000 | Max curr: 0x00000001
[    3.719186] mmc0: sdhci: Resp[0]:   0x00000000 | Resp[1]: 0x00000000
[    3.725708] mmc0: sdhci: Resp[2]:   0x00000000 | Resp[3]: 0x00000000
[    3.732230] mmc0: sdhci: Host ctl2: 0x00000000
[    3.736724] mmc0: sdhci: ============================================
[    3.819205] mmc0: new high speed SDIO card at address 0001
>
>> You don't have another Raspberry Pi 4 by any chance?
> No, i don't.
>
>> Another cause might be the toolchain. Currently I use a not so fresh gcc
>> 11.3.1 from Linaro.
> Previous tries were cross built. I tried a native build with (Gentoo
> packages) gcc 14.2.1_p20241221, binutils 2.44, and glibc 2.40-r8; but
> got same result.
> Will do a software upgrade overnight to try with more up to date build
> system.
I will try to update my toolchain, but this will take some time.
>
>> Except of this, I noticed that your configuration doesn't enable
>> DWC2_DUAL_ROLE and the LEDS_TRIGGER.
> I have no use of them (and i have a lot of things to disable, but i
> prefer to do that starting with a working system).
I this case you can disable DWC2 completely, because USB host is 
provided by xhci driver. LEDS_TRIGGER is used for the ACT LED as heartbeat.
>
> Regards.
>