mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
* [PATCH] mmc: dw_mmc: fix card threshold control configuration
@ 2018-05-29 10:38 Qing Xia
  2018-06-11 12:20 ` Ulf Hansson
  0 siblings, 1 reply; 5+ messages in thread
From: Qing Xia @ 2018-05-29 10:38 UTC (permalink / raw)
  To: jh80.chung, ulf.hansson; +Cc: linux-mmc, linux-kernel, x00270170

From: x00270170 <xiaqing17@hisilicon.com>

Card write threshold control is supposed to be set since controller
version 2.80a for data write in HS400 mode and data read in
HS200/HS400/SDR104 mode. However the current code returns without
configuring it in the case of data writing in HS400 mode.
Meanwhile the patch fixes that the current code goes to
'disable' when doing data reading in HS400 mode.

Signed-off-by: Qing Xia <xiaqing17@hisilicon.com>
---
 drivers/mmc/host/dw_mmc.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
index 29a1afa..3ee8f57 100644
--- a/drivers/mmc/host/dw_mmc.c
+++ b/drivers/mmc/host/dw_mmc.c
@@ -1065,8 +1065,8 @@ static void dw_mci_ctrl_thld(struct dw_mci *host, struct mmc_data *data)
 	 * It's used when HS400 mode is enabled.
 	 */
 	if (data->flags & MMC_DATA_WRITE &&
-		!(host->timing != MMC_TIMING_MMC_HS400))
-		return;
+		host->timing != MMC_TIMING_MMC_HS400)
+		goto disable;
 
 	if (data->flags & MMC_DATA_WRITE)
 		enable = SDMMC_CARD_WR_THR_EN;
@@ -1074,7 +1074,8 @@ static void dw_mci_ctrl_thld(struct dw_mci *host, struct mmc_data *data)
 		enable = SDMMC_CARD_RD_THR_EN;
 
 	if (host->timing != MMC_TIMING_MMC_HS200 &&
-	    host->timing != MMC_TIMING_UHS_SDR104)
+	    host->timing != MMC_TIMING_UHS_SDR104 &&
+	    host->timing != MMC_TIMING_MMC_HS400)
 		goto disable;
 
 	blksz_depth = blksz / (1 << host->data_shift);
-- 
2.8.1

^ permalink raw reply	[flat|nested] 5+ messages in thread

* Re: [PATCH] mmc: dw_mmc: fix card threshold control configuration
  2018-05-29 10:38 [PATCH] mmc: dw_mmc: fix card threshold control configuration Qing Xia
@ 2018-06-11 12:20 ` Ulf Hansson
  2018-06-11 14:17   ` Shawn Lin
  2018-07-02 13:16   ` Ulf Hansson
  0 siblings, 2 replies; 5+ messages in thread
From: Ulf Hansson @ 2018-06-11 12:20 UTC (permalink / raw)
  To: Shawn Lin, Evgeniy Didin, Doug Anderson
  Cc: Jaehoon Chung, Qing Xia, linux-mmc, Linux Kernel Mailing List

+ Shawn Lin, Evgeniy Didin, Doug Andersson

On 29 May 2018 at 12:38, Qing Xia <xiaqing17@hisilicon.com> wrote:
> From: x00270170 <xiaqing17@hisilicon.com>
>
> Card write threshold control is supposed to be set since controller
> version 2.80a for data write in HS400 mode and data read in
> HS200/HS400/SDR104 mode. However the current code returns without
> configuring it in the case of data writing in HS400 mode.
> Meanwhile the patch fixes that the current code goes to
> 'disable' when doing data reading in HS400 mode.
>
> Signed-off-by: Qing Xia <xiaqing17@hisilicon.com>

This looks good to me. However, it seems like Jaehoon has been busy,
no response yet.

I have looped in a few more people to see if they thinks this makes sense.

Kind regards
Uffe

> ---
>  drivers/mmc/host/dw_mmc.c | 7 ++++---
>  1 file changed, 4 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
> index 29a1afa..3ee8f57 100644
> --- a/drivers/mmc/host/dw_mmc.c
> +++ b/drivers/mmc/host/dw_mmc.c
> @@ -1065,8 +1065,8 @@ static void dw_mci_ctrl_thld(struct dw_mci *host, struct mmc_data *data)
>          * It's used when HS400 mode is enabled.
>          */
>         if (data->flags & MMC_DATA_WRITE &&
> -               !(host->timing != MMC_TIMING_MMC_HS400))
> -               return;
> +               host->timing != MMC_TIMING_MMC_HS400)
> +               goto disable;
>
>         if (data->flags & MMC_DATA_WRITE)
>                 enable = SDMMC_CARD_WR_THR_EN;
> @@ -1074,7 +1074,8 @@ static void dw_mci_ctrl_thld(struct dw_mci *host, struct mmc_data *data)
>                 enable = SDMMC_CARD_RD_THR_EN;
>
>         if (host->timing != MMC_TIMING_MMC_HS200 &&
> -           host->timing != MMC_TIMING_UHS_SDR104)
> +           host->timing != MMC_TIMING_UHS_SDR104 &&
> +           host->timing != MMC_TIMING_MMC_HS400)
>                 goto disable;
>
>         blksz_depth = blksz / (1 << host->data_shift);
> --
> 2.8.1
>

^ permalink raw reply	[flat|nested] 5+ messages in thread

* Re: [PATCH] mmc: dw_mmc: fix card threshold control configuration
  2018-06-11 12:20 ` Ulf Hansson
@ 2018-06-11 14:17   ` Shawn Lin
  2018-07-02 17:00     ` Doug Anderson
  2018-07-02 13:16   ` Ulf Hansson
  1 sibling, 1 reply; 5+ messages in thread
From: Shawn Lin @ 2018-06-11 14:17 UTC (permalink / raw)
  To: Ulf Hansson
  Cc: Evgeniy Didin, Doug Anderson, shawn.lin, Jaehoon Chung, Qing Xia,
	linux-mmc, Linux Kernel Mailing List

On 2018/6/11 20:20, Ulf Hansson wrote:
> + Shawn Lin, Evgeniy Didin, Doug Andersson
> 
> On 29 May 2018 at 12:38, Qing Xia <xiaqing17@hisilicon.com> wrote:
>> From: x00270170 <xiaqing17@hisilicon.com>
>>
>> Card write threshold control is supposed to be set since controller
>> version 2.80a for data write in HS400 mode and data read in
>> HS200/HS400/SDR104 mode. However the current code returns without
>> configuring it in the case of data writing in HS400 mode.
>> Meanwhile the patch fixes that the current code goes to
>> 'disable' when doing data reading in HS400 mode.
>>

I'm more or less unable to review this, as I don't have 2.80a databook,
nor a such platform to verify it. :(

>> Signed-off-by: Qing Xia <xiaqing17@hisilicon.com>
> 
> This looks good to me. However, it seems like Jaehoon has been busy,
> no response yet.
> 
> I have looped in a few more people to see if they thinks this makes sense.
> 
> Kind regards
> Uffe
> 
>> ---
>>   drivers/mmc/host/dw_mmc.c | 7 ++++---
>>   1 file changed, 4 insertions(+), 3 deletions(-)
>>
>> diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
>> index 29a1afa..3ee8f57 100644
>> --- a/drivers/mmc/host/dw_mmc.c
>> +++ b/drivers/mmc/host/dw_mmc.c
>> @@ -1065,8 +1065,8 @@ static void dw_mci_ctrl_thld(struct dw_mci *host, struct mmc_data *data)
>>           * It's used when HS400 mode is enabled.
>>           */
>>          if (data->flags & MMC_DATA_WRITE &&
>> -               !(host->timing != MMC_TIMING_MMC_HS400))
>> -               return;
>> +               host->timing != MMC_TIMING_MMC_HS400)
>> +               goto disable;
>>
>>          if (data->flags & MMC_DATA_WRITE)
>>                  enable = SDMMC_CARD_WR_THR_EN;
>> @@ -1074,7 +1074,8 @@ static void dw_mci_ctrl_thld(struct dw_mci *host, struct mmc_data *data)
>>                  enable = SDMMC_CARD_RD_THR_EN;
>>
>>          if (host->timing != MMC_TIMING_MMC_HS200 &&
>> -           host->timing != MMC_TIMING_UHS_SDR104)
>> +           host->timing != MMC_TIMING_UHS_SDR104 &&
>> +           host->timing != MMC_TIMING_MMC_HS400)
>>                  goto disable;
>>
>>          blksz_depth = blksz / (1 << host->data_shift);
>> --
>> 2.8.1
>>
> 
> 
> 


-- 
Best Regards
Shawn Lin

^ permalink raw reply	[flat|nested] 5+ messages in thread

* Re: [PATCH] mmc: dw_mmc: fix card threshold control configuration
  2018-06-11 12:20 ` Ulf Hansson
  2018-06-11 14:17   ` Shawn Lin
@ 2018-07-02 13:16   ` Ulf Hansson
  1 sibling, 0 replies; 5+ messages in thread
From: Ulf Hansson @ 2018-07-02 13:16 UTC (permalink / raw)
  To: Shawn Lin, Evgeniy Didin, Doug Anderson
  Cc: Jaehoon Chung, Qing Xia, linux-mmc, Linux Kernel Mailing List

On 11 June 2018 at 14:20, Ulf Hansson <ulf.hansson@linaro.org> wrote:
> + Shawn Lin, Evgeniy Didin, Doug Andersson
>
> On 29 May 2018 at 12:38, Qing Xia <xiaqing17@hisilicon.com> wrote:
>> From: x00270170 <xiaqing17@hisilicon.com>
>>
>> Card write threshold control is supposed to be set since controller
>> version 2.80a for data write in HS400 mode and data read in
>> HS200/HS400/SDR104 mode. However the current code returns without
>> configuring it in the case of data writing in HS400 mode.
>> Meanwhile the patch fixes that the current code goes to
>> 'disable' when doing data reading in HS400 mode.
>>
>> Signed-off-by: Qing Xia <xiaqing17@hisilicon.com>
>
> This looks good to me. However, it seems like Jaehoon has been busy,
> no response yet.
>
> I have looped in a few more people to see if they thinks this makes sense.

It sounds this should be a fix for regression (also confirmed
off-list). Could you please resend and by adding a fixes tag?

In the meantime, I have applied this for my next branch, as to get it
tested. I can move it later to fixes if needed.

[...]

Kind regards
Uffe

^ permalink raw reply	[flat|nested] 5+ messages in thread

* Re: [PATCH] mmc: dw_mmc: fix card threshold control configuration
  2018-06-11 14:17   ` Shawn Lin
@ 2018-07-02 17:00     ` Doug Anderson
  0 siblings, 0 replies; 5+ messages in thread
From: Doug Anderson @ 2018-07-02 17:00 UTC (permalink / raw)
  To: Shawn Lin
  Cc: Ulf Hansson, Evgeniy Didin, Jaehoon Chung, Qing Xia, linux-mmc,
	Linux Kernel Mailing List

Hi,

On Mon, Jun 11, 2018 at 7:17 AM, Shawn Lin <shawn.lin@rock-chips.com> wrote:
> On 2018/6/11 20:20, Ulf Hansson wrote:
>>
>> + Shawn Lin, Evgeniy Didin, Doug Andersson
>>
>> On 29 May 2018 at 12:38, Qing Xia <xiaqing17@hisilicon.com> wrote:
>>>
>>> From: x00270170 <xiaqing17@hisilicon.com>
>>>
>>> Card write threshold control is supposed to be set since controller
>>> version 2.80a for data write in HS400 mode and data read in
>>> HS200/HS400/SDR104 mode. However the current code returns without
>>> configuring it in the case of data writing in HS400 mode.
>>> Meanwhile the patch fixes that the current code goes to
>>> 'disable' when doing data reading in HS400 mode.
>>>
>
> I'm more or less unable to review this, as I don't have 2.80a databook,
> nor a such platform to verify it. :(

Sorry for not responding earlier.  I didn't have a lot of context here
so reviewing it never made it to the top of my queue.  ...but quickly
checking what I can...

I'm in almost the same boat as Shawn.  I don't have any HS400 hardware
using dw_mmc available to me, but I do seem to have the 2.80a databook
hanging around and it agrees that we need to enable the card write
threshold for HS400 writes.  That also matches the comments, so the
patch seems right to me.  Probably Jaehoon would make a better
reviewer since he submitted the original code and also has more
familiarity with HS400 on dw_mmc.

I don't think I have enough context to give a full Reviewed-by, but in
the very least I can confirm that the patch seems sane.

-Doug

^ permalink raw reply	[flat|nested] 5+ messages in thread

end of thread, other threads:[~2018-07-02 17:00 UTC | newest]

Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-05-29 10:38 [PATCH] mmc: dw_mmc: fix card threshold control configuration Qing Xia
2018-06-11 12:20 ` Ulf Hansson
2018-06-11 14:17   ` Shawn Lin
2018-07-02 17:00     ` Doug Anderson
2018-07-02 13:16   ` Ulf Hansson

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®