* [PATCH v2 1/9] dt-bindings: media: add the Qualcomm SM8750 camera subsystem
2026-10-28 9:29 [PATCH v2 0/9] media: camss: add SM8750 support Qianhui Xu
@ 2026-10-28 9:29 ` Qianhui Xu
2026-10-28 12:53 ` Krzysztof Kozlowski
2026-10-28 9:29 ` [PATCH v2 2/9] media: camss: csiphy: add CSIPHY 2.4.0 lane settings for SM8750 Qianhui Xu
` (10 subsequent siblings)
11 siblings, 1 reply; 18+ messages in thread
From: Qianhui Xu @ 2026-10-28 9:29 UTC (permalink / raw)
To: 'Bryan O'Donoghue', Mauro Carvalho Chehab
Cc: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Bjorn Andersson,
Konrad Dybcio, Hangxiang Ma, linux-media, linux-arm-msm,
devicetree, linux-kernel
SM8750 has six CSIPHY instances, three full and two lite CSIDs, and
three full plus two lite VFEs behind one camera subsystem. Document the
node with the register ranges, clocks, interconnects, power domains and
the sub-block layout of that SoC.
Signed-off-by: Qianhui Xu <xiaqinghuan@mail.ustc.edu.cn>
---
.../bindings/media/qcom,sm8750-camss.yaml | 435 ++++++++++++++++++
1 file changed, 435 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/qcom,sm8750-camss.yaml
diff --git a/Documentation/devicetree/bindings/media/qcom,sm8750-camss.yaml b/Documentation/devicetree/bindings/media/qcom,sm8750-camss.yaml
new file mode 100644
index 000000000..e0e0722a8
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/qcom,sm8750-camss.yaml
@@ -0,0 +1,435 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/qcom,sm8750-camss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM8750 Camera Subsystem (CAMSS)
+
+maintainers:
+ - Hangxiang Ma <hangxiang.ma@oss.qualcomm.com>
+
+description:
+ The CAMSS IP is a CSI decoder and ISP present on Qualcomm platforms.
+
+properties:
+ compatible:
+ const: qcom,sm8750-camss
+
+ dma-coherent: true
+
+ reg:
+ maxItems: 19
+
+ reg-names:
+ items:
+ - const: csid0
+ - const: csid1
+ - const: csid2
+ - const: csid_lite0
+ - const: csid_lite1
+ - const: csiphy0
+ - const: csiphy1
+ - const: csiphy2
+ - const: csiphy3
+ - const: csiphy4
+ - const: csiphy5
+ - const: csitpg0
+ - const: csitpg1
+ - const: csitpg2
+ - const: vfe0
+ - const: vfe1
+ - const: vfe2
+ - const: vfe_lite0
+ - const: vfe_lite1
+
+ clocks:
+ maxItems: 35
+
+ clock-names:
+ items:
+ - const: camnoc_nrt_axi
+ - const: camnoc_rt_axi
+ - const: cpas_ahb
+ - const: cpas_fast_ahb
+ - const: cpas_vfe0
+ - const: cpas_vfe1
+ - const: cpas_vfe2
+ - const: cpas_vfe_lite
+ - const: csid
+ - const: csid_csiphy_rx
+ - const: csiphy0
+ - const: csiphy0_timer
+ - const: csiphy1
+ - const: csiphy1_timer
+ - const: csiphy2
+ - const: csiphy2_timer
+ - const: csiphy3
+ - const: csiphy3_timer
+ - const: csiphy4
+ - const: csiphy4_timer
+ - const: csiphy5
+ - const: csiphy5_timer
+ - const: gcc_axi_hf
+ - const: gcc_axi_sf
+ - const: vfe0
+ - const: vfe0_fast_ahb
+ - const: vfe1
+ - const: vfe1_fast_ahb
+ - const: vfe2
+ - const: vfe2_fast_ahb
+ - const: vfe_lite
+ - const: vfe_lite_ahb
+ - const: vfe_lite_cphy_rx
+ - const: vfe_lite_csid
+ - const: qdss_debug_xo
+
+ interrupts:
+ maxItems: 16
+
+ interrupt-names:
+ items:
+ - const: csid0
+ - const: csid1
+ - const: csid2
+ - const: csid_lite0
+ - const: csid_lite1
+ - const: csiphy0
+ - const: csiphy1
+ - const: csiphy2
+ - const: csiphy3
+ - const: csiphy4
+ - const: csiphy5
+ - const: vfe0
+ - const: vfe1
+ - const: vfe2
+ - const: vfe_lite0
+ - const: vfe_lite1
+
+ interconnects:
+ maxItems: 4
+
+ interconnect-names:
+ items:
+ - const: ahb
+ - const: hf_mnoc
+ - const: sf_mnoc
+ - const: sf_icp_mnoc
+
+ iommus:
+ maxItems: 1
+
+ power-domains:
+ items:
+ - description:
+ IFE0 GDSC - Global Distributed Switch Controller for IFE0.
+ - description:
+ IFE1 GDSC - Global Distributed Switch Controller for IFE1.
+ - description:
+ IFE2 GDSC - Global Distributed Switch Controller for IFE2.
+ - description:
+ Titan GDSC - Global Distributed Switch Controller for the entire camss.
+
+ power-domain-names:
+ items:
+ - const: ife0
+ - const: ife1
+ - const: ife2
+ - const: top
+
+ vdd-csiphy0-0p9-supply:
+ description:
+ Phandle to a 0.9V regulator supply to CSIPHY0 core block.
+
+ vdd-csiphy0-1p2-supply:
+ description:
+ Phandle to a 1.2V regulator supply to CSIPHY0 pll block.
+
+ vdd-csiphy1-0p9-supply:
+ description:
+ Phandle to a 0.9V regulator supply to CSIPHY1 core block.
+
+ vdd-csiphy1-1p2-supply:
+ description:
+ Phandle to a 1.2V regulator supply to CSIPHY1 pll block.
+
+ vdd-csiphy2-0p9-supply:
+ description:
+ Phandle to a 0.9V regulator supply to CSIPHY2 core block.
+
+ vdd-csiphy2-1p2-supply:
+ description:
+ Phandle to a 1.2V regulator supply to CSIPHY2 pll block.
+
+ vdd-csiphy3-0p9-supply:
+ description:
+ Phandle to a 0.9V regulator supply to CSIPHY3 core block.
+
+ vdd-csiphy3-1p2-supply:
+ description:
+ Phandle to a 1.2V regulator supply to CSIPHY3 pll block.
+
+ vdd-csiphy4-0p9-supply:
+ description:
+ Phandle to a 0.9V regulator supply to CSIPHY4 core block.
+
+ vdd-csiphy4-1p2-supply:
+ description:
+ Phandle to a 1.2V regulator supply to CSIPHY4 pll block.
+
+ vdd-csiphy5-0p9-supply:
+ description:
+ Phandle to a 0.9V regulator supply to CSIPHY5 core block.
+
+ vdd-csiphy5-1p2-supply:
+ description:
+ Phandle to a 1.2V regulator supply to CSIPHY5 pll block.
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ description:
+ CSI input ports.
+
+ patternProperties:
+ "^port@[0-5]$":
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
+ description:
+ Input ports for receiving CSI data on CSIPHY 0-5.
+
+ properties:
+ endpoint:
+ $ref: video-interfaces.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ data-lanes:
+ minItems: 1
+ maxItems: 4
+
+ bus-type:
+ enum:
+ - 1 # MEDIA_BUS_TYPE_CSI2_CPHY
+ - 4 # MEDIA_BUS_TYPE_CSI2_DPHY
+
+ required:
+ - data-lanes
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - clocks
+ - clock-names
+ - interrupts
+ - interrupt-names
+ - interconnects
+ - interconnect-names
+ - iommus
+ - power-domains
+ - power-domain-names
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,sm8750-gcc.h>
+ #include <dt-bindings/clock/qcom,sm8750-camcc.h>
+ #include <dt-bindings/interconnect/qcom,icc.h>
+ #include <dt-bindings/interconnect/qcom,sm8750-rpmh.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/power/qcom-rpmpd.h>
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ isp@ad27000 {
+ compatible = "qcom,sm8750-camss";
+
+ reg = <0x0 0x0ad27000 0x0 0x2b00>,
+ <0x0 0x0ad2a000 0x0 0x2b00>,
+ <0x0 0x0ad2d000 0x0 0x2b00>,
+ <0x0 0x0ad6d000 0x0 0xa00>,
+ <0x0 0x0ad72000 0x0 0xa00>,
+ <0x0 0x0ada9000 0x0 0x2000>,
+ <0x0 0x0adab000 0x0 0x2000>,
+ <0x0 0x0adad000 0x0 0x2000>,
+ <0x0 0x0adaf000 0x0 0x2000>,
+ <0x0 0x0adb1000 0x0 0x2000>,
+ <0x0 0x0adb3000 0x0 0x2000>,
+ <0x0 0x0ad8b000 0x0 0x400>,
+ <0x0 0x0ad8c000 0x0 0x400>,
+ <0x0 0x0ad8d000 0x0 0x400>,
+ <0x0 0x0ac86000 0x0 0x10000>,
+ <0x0 0x0ac96000 0x0 0x10000>,
+ <0x0 0x0aca6000 0x0 0x10000>,
+ <0x0 0x0ad6e000 0x0 0x3000>,
+ <0x0 0x0ad73000 0x0 0x3000>;
+ reg-names = "csid0",
+ "csid1",
+ "csid2",
+ "csid_lite0",
+ "csid_lite1",
+ "csiphy0",
+ "csiphy1",
+ "csiphy2",
+ "csiphy3",
+ "csiphy4",
+ "csiphy5",
+ "csitpg0",
+ "csitpg1",
+ "csitpg2",
+ "vfe0",
+ "vfe1",
+ "vfe2",
+ "vfe_lite0",
+ "vfe_lite1";
+
+ clocks = <&camcc CAM_CC_CAMNOC_NRT_AXI_CLK>,
+ <&camcc CAM_CC_CAMNOC_RT_AXI_CLK>,
+ <&camcc CAM_CC_CAM_TOP_AHB_CLK>,
+ <&camcc CAM_CC_CAM_TOP_FAST_AHB_CLK>,
+ <&camcc CAM_CC_CAMNOC_RT_TFE_0_MAIN_CLK>,
+ <&camcc CAM_CC_CAMNOC_RT_TFE_1_MAIN_CLK>,
+ <&camcc CAM_CC_CAMNOC_RT_TFE_2_MAIN_CLK>,
+ <&camcc CAM_CC_CAMNOC_RT_IFE_LITE_CLK>,
+ <&camcc CAM_CC_CSID_CLK>,
+ <&camcc CAM_CC_CSID_CSIPHY_RX_CLK>,
+ <&camcc CAM_CC_CSIPHY0_CLK>,
+ <&camcc CAM_CC_CSI0PHYTIMER_CLK>,
+ <&camcc CAM_CC_CSIPHY1_CLK>,
+ <&camcc CAM_CC_CSI1PHYTIMER_CLK>,
+ <&camcc CAM_CC_CSIPHY2_CLK>,
+ <&camcc CAM_CC_CSI2PHYTIMER_CLK>,
+ <&camcc CAM_CC_CSIPHY3_CLK>,
+ <&camcc CAM_CC_CSI3PHYTIMER_CLK>,
+ <&camcc CAM_CC_CSIPHY4_CLK>,
+ <&camcc CAM_CC_CSI4PHYTIMER_CLK>,
+ <&camcc CAM_CC_CSIPHY5_CLK>,
+ <&camcc CAM_CC_CSI5PHYTIMER_CLK>,
+ <&gcc GCC_CAMERA_HF_AXI_CLK>,
+ <&gcc GCC_CAMERA_SF_AXI_CLK>,
+ <&camcc CAM_CC_TFE_0_MAIN_CLK>,
+ <&camcc CAM_CC_TFE_0_MAIN_FAST_AHB_CLK>,
+ <&camcc CAM_CC_TFE_1_MAIN_CLK>,
+ <&camcc CAM_CC_TFE_1_MAIN_FAST_AHB_CLK>,
+ <&camcc CAM_CC_TFE_2_MAIN_CLK>,
+ <&camcc CAM_CC_TFE_2_MAIN_FAST_AHB_CLK>,
+ <&camcc CAM_CC_IFE_LITE_CLK>,
+ <&camcc CAM_CC_IFE_LITE_AHB_CLK>,
+ <&camcc CAM_CC_IFE_LITE_CPHY_RX_CLK>,
+ <&camcc CAM_CC_IFE_LITE_CSID_CLK>,
+ <&camcc CAM_CC_QDSS_DEBUG_XO_CLK>;
+ clock-names = "camnoc_nrt_axi",
+ "camnoc_rt_axi",
+ "cpas_ahb",
+ "cpas_fast_ahb",
+ "cpas_vfe0",
+ "cpas_vfe1",
+ "cpas_vfe2",
+ "cpas_vfe_lite",
+ "csid",
+ "csid_csiphy_rx",
+ "csiphy0",
+ "csiphy0_timer",
+ "csiphy1",
+ "csiphy1_timer",
+ "csiphy2",
+ "csiphy2_timer",
+ "csiphy3",
+ "csiphy3_timer",
+ "csiphy4",
+ "csiphy4_timer",
+ "csiphy5",
+ "csiphy5_timer",
+ "gcc_axi_hf",
+ "gcc_axi_sf",
+ "vfe0",
+ "vfe0_fast_ahb",
+ "vfe1",
+ "vfe1_fast_ahb",
+ "vfe2",
+ "vfe2_fast_ahb",
+ "vfe_lite",
+ "vfe_lite_ahb",
+ "vfe_lite_cphy_rx",
+ "vfe_lite_csid",
+ "qdss_debug_xo";
+
+ interrupts = <GIC_SPI 601 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 603 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 431 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 605 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 376 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 477 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 478 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 479 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 448 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 122 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 89 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 433 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 436 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 457 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 606 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 377 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "csid0",
+ "csid1",
+ "csid2",
+ "csid_lite0",
+ "csid_lite1",
+ "csiphy0",
+ "csiphy1",
+ "csiphy2",
+ "csiphy3",
+ "csiphy4",
+ "csiphy5",
+ "vfe0",
+ "vfe1",
+ "vfe2",
+ "vfe_lite0",
+ "vfe_lite1";
+
+ interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+ &config_noc SLAVE_CAMERA_CFG QCOM_ICC_TAG_ACTIVE_ONLY>,
+ <&mmss_noc MASTER_CAMNOC_HF QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+ <&mmss_noc MASTER_CAMNOC_SF QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+ <&mmss_noc MASTER_CAMNOC_NRT_ICP_SF QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "ahb",
+ "hf_mnoc",
+ "sf_mnoc",
+ "sf_icp_mnoc";
+
+ iommus = <&apps_smmu 0x1c00 0x00>;
+
+ power-domains = <&camcc CAM_CC_TFE_0_GDSC>,
+ <&camcc CAM_CC_TFE_1_GDSC>,
+ <&camcc CAM_CC_TFE_2_GDSC>,
+ <&camcc CAM_CC_TITAN_TOP_GDSC>;
+ power-domain-names = "ife0",
+ "ife1",
+ "ife2",
+ "top";
+
+ vdd-csiphy0-0p9-supply = <&vreg_0p9_supply>;
+ vdd-csiphy0-1p2-supply = <&vreg_1p2_supply>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ csiphy_ep0: endpoint {
+ data-lanes = <0 1>;
+ remote-endpoint = <&sensor_ep>;
+ };
+ };
+ };
+ };
+ };
^ permalink raw reply [flat|nested] 18+ messages in thread* Re: [PATCH v2 1/9] dt-bindings: media: add the Qualcomm SM8750 camera subsystem
2026-10-28 9:29 ` [PATCH v2 1/9] dt-bindings: media: add the Qualcomm SM8750 camera subsystem Qianhui Xu
@ 2026-10-28 12:53 ` Krzysztof Kozlowski
0 siblings, 0 replies; 18+ messages in thread
From: Krzysztof Kozlowski @ 2026-10-28 12:53 UTC (permalink / raw)
To: Qianhui Xu
Cc: 'Bryan O'Donoghue',
Mauro Carvalho Chehab, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, Bjorn Andersson, Konrad Dybcio, Hangxiang Ma,
linux-media, linux-arm-msm, devicetree, linux-kernel
On Wed, Oct 28, 2026 at 05:29:55PM +0800, Qianhui Xu wrote:
> SM8750 has six CSIPHY instances, three full and two lite CSIDs, and
> three full plus two lite VFEs behind one camera subsystem. Document the
> node with the register ranges, clocks, interconnects, power domains and
> the sub-block layout of that SoC.
>
> Signed-off-by: Qianhui Xu <xiaqinghuan@mail.ustc.edu.cn>
What happened with:
https://lore.kernel.org/all/20260721-add-support-for-camss-on-sm8750-v6-2-a5f841061d18@oss.qualcomm.com/
? That's a v6....
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 18+ messages in thread
* [PATCH v2 2/9] media: camss: csiphy: add CSIPHY 2.4.0 lane settings for SM8750
2026-10-28 9:29 [PATCH v2 0/9] media: camss: add SM8750 support Qianhui Xu
2026-10-28 9:29 ` [PATCH v2 1/9] dt-bindings: media: add the Qualcomm SM8750 camera subsystem Qianhui Xu
@ 2026-10-28 9:29 ` Qianhui Xu
2026-10-28 9:29 ` [PATCH v2 3/9] media: camss: csid: unwind the power-on path through a single error label Qianhui Xu
` (9 subsequent siblings)
11 siblings, 0 replies; 18+ messages in thread
From: Qianhui Xu @ 2026-10-28 9:29 UTC (permalink / raw)
To: 'Bryan O'Donoghue', Mauro Carvalho Chehab
Cc: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Bjorn Andersson,
Konrad Dybcio, Hangxiang Ma, linux-media, linux-arm-msm,
devicetree, linux-kernel
SM8750 uses the CSIPHY 2.4.0 CSI PHY. The block keeps the register layout
already handled by csiphy_ops_3ph_1_0 (four data lanes at a 0x400 stride,
clock lane at 0xc00, common block at +0x1000), so the generation-2 lane
programming sequence applies unchanged, but the per-lane values differ from
the 2.3.0 block used on SM8550/SM8650:
- the lane register 0x0000 default is 0x8c instead of 0x8e,
- every lane gains the four SKEW_CAL registers
(0x0094/0x005c/0x0060/0x0064),
- the common status block sits at 0x138 instead of 0xb0.
Add lane_regs_sm8750[] with those values, report CAMSS_8750 as a
generation-2 PHY, and select the new table together with the 0x138
common status offset in csiphy_init().
The register map is the one the CSIPHY 2.4.0 vendor driver uses for its
two-phase variant (csiphy_2ph_v2_4_0_reg, 103 entries): address, mask and
parameter type are identical for all 103 entries, and the data byte is
identical for 99. The four remaining entries are the SKEW_CAL data bytes
of the four lanes (0x005c and its per-lane copies), which are 0x00 here,
i.e. the vendor value. This SoC wires the PHY in two-phase mode; the
three-phase variant of the same PHY (csiphy_3ph_v2_4_0_reg, 72 entries)
uses a different address layout, so its table cannot be reused. The
0x138 common status offset is where the vendor parameter block of this
generation points its status register window (0x1000 + 0x138).
These settings are the ones the CSIPHY runs with on a Lenovo TB322FC
(SM8750), where both the rear s5kjns and the front gc08a8 sensor stream
at full resolution and 30 fps. Enabling the SKEW_CAL data byte of the
four lanes (0x005c = 0x54) instead of leaving it at the vendor value was
also measured on that device: 90 frames with each setting, no error
reported, 30.26 fps and 53.81 vs 53.78 frame time deviation, i.e. no
measurable difference, so the vendor value is kept.
Signed-off-by: Qianhui Xu <xiaqinghuan@mail.ustc.edu.cn>
---
.../qcom/camss/camss-csiphy-3ph-1-0.c | 124 ++++++++++++++++++
drivers/media/platform/qcom/camss/camss.h | 1 +
2 files changed, 125 insertions(+)
diff --git a/drivers/media/platform/qcom/camss/camss-csiphy-3ph-1-0.c b/drivers/media/platform/qcom/camss/camss-csiphy-3ph-1-0.c
index dac8d2ecf..9cf22ff17 100644
--- a/drivers/media/platform/qcom/camss/camss-csiphy-3ph-1-0.c
+++ b/drivers/media/platform/qcom/camss/camss-csiphy-3ph-1-0.c
@@ -804,6 +804,123 @@ csiphy_lane_regs lane_regs_sm8650[] = {
{0x0c10, 0x52, 0x00, CSIPHY_DEFAULT_PARAMS},
};
+/* GEN2 2.4.0 2PH 4 lane DPHY mode */
+static const struct
+csiphy_lane_regs lane_regs_sm8750[] = {
+ /* LN 0 */
+ {0x0094, 0x00, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x00A0, 0x00, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0090, 0x0F, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0098, 0x08, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0094, 0x07, 0xD1, CSIPHY_DEFAULT_PARAMS},
+ {0x0030, 0x00, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0000, 0x8C, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0038, 0xFE, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x002C, 0x01, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0034, 0x0F, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x001C, 0x0A, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0014, 0x60, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x003C, 0xB8, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0004, 0x0C, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0020, 0x00, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0008, 0x19, 0x00, CSIPHY_SETTLE_CNT_LOWER_BYTE},
+ {0x0010, 0x52, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0094, 0xD7, 0x00, CSIPHY_SKEW_CAL},
+ {0x005C, 0x54, 0x00, CSIPHY_SKEW_CAL},
+ {0x0060, 0xFD, 0x00, CSIPHY_SKEW_CAL},
+ {0x0064, 0x7F, 0x00, CSIPHY_SKEW_CAL},
+
+ /* LN 2 */
+ {0x0494, 0x00, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x04A0, 0x00, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0490, 0x0F, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0498, 0x08, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0494, 0x07, 0xD1, CSIPHY_DEFAULT_PARAMS},
+ {0x0430, 0x00, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0400, 0x8C, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0438, 0xFE, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x042C, 0x01, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0434, 0x0F, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x041C, 0x0A, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0414, 0x60, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x043C, 0xB8, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0404, 0x0C, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0420, 0x00, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0408, 0x19, 0x00, CSIPHY_SETTLE_CNT_LOWER_BYTE},
+ {0x0410, 0x52, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0494, 0xD7, 0x00, CSIPHY_SKEW_CAL},
+ {0x045C, 0x54, 0x00, CSIPHY_SKEW_CAL},
+ {0x0460, 0xFD, 0x00, CSIPHY_SKEW_CAL},
+ {0x0464, 0x7F, 0x00, CSIPHY_SKEW_CAL},
+
+ /* LN 4 */
+ {0x0894, 0x00, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x08A0, 0x00, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0890, 0x0F, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0898, 0x08, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0894, 0x07, 0xD1, CSIPHY_DEFAULT_PARAMS},
+ {0x0830, 0x00, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0800, 0x8C, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0838, 0xFE, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x082C, 0x01, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0834, 0x0F, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x081C, 0x0A, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0814, 0x60, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x083C, 0xB8, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0804, 0x0C, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0820, 0x00, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0808, 0x19, 0x00, CSIPHY_SETTLE_CNT_LOWER_BYTE},
+ {0x0810, 0x52, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0894, 0xD7, 0x00, CSIPHY_SKEW_CAL},
+ {0x085C, 0x54, 0x00, CSIPHY_SKEW_CAL},
+ {0x0860, 0xFD, 0x00, CSIPHY_SKEW_CAL},
+ {0x0864, 0x7F, 0x00, CSIPHY_SKEW_CAL},
+
+ /* LN 6 */
+ {0x0C94, 0x00, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0CA0, 0x00, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0C90, 0x0F, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0C98, 0x08, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0C94, 0x07, 0xD1, CSIPHY_DEFAULT_PARAMS},
+ {0x0C30, 0x00, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0C00, 0x8C, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0C38, 0xFE, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0C2C, 0x01, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0C34, 0x0F, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0C1C, 0x0A, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0C14, 0x60, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0C3C, 0xB8, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0C04, 0x0C, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0C20, 0x00, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0C08, 0x19, 0x00, CSIPHY_SETTLE_CNT_LOWER_BYTE},
+ {0x0C10, 0x52, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0C94, 0xD7, 0x00, CSIPHY_SKEW_CAL},
+ {0x0C5C, 0x54, 0x00, CSIPHY_SKEW_CAL},
+ {0x0C60, 0xFD, 0x00, CSIPHY_SKEW_CAL},
+ {0x0C64, 0x7F, 0x00, CSIPHY_SKEW_CAL},
+
+ /* LN CLK */
+ {0x0E94, 0x00, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0EA0, 0x00, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0E90, 0x0F, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0E98, 0x08, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0E94, 0x07, 0xD1, CSIPHY_DEFAULT_PARAMS},
+ {0x0E30, 0x00, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0E28, 0x04, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0E00, 0x80, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0E0C, 0xFF, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0E38, 0x1F, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0E2C, 0x01, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0E34, 0x0F, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0E1C, 0x0A, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0E14, 0x60, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0E3C, 0xB8, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0E04, 0x0C, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0E20, 0x00, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0E08, 0x19, 0x00, CSIPHY_SETTLE_CNT_LOWER_BYTE},
+ {0x0E10, 0x52, 0x00, CSIPHY_DEFAULT_PARAMS},
+};
+
/* 4nm 2PH v 2.1.2 2p5Gbps 4 lane DPHY mode */
static const struct
csiphy_lane_regs lane_regs_x1e80100[] = {
@@ -1139,6 +1256,7 @@ static bool csiphy_is_gen2(u32 version)
case CAMSS_845:
case CAMSS_8550:
case CAMSS_8650:
+ case CAMSS_8750:
case CAMSS_8775P:
case CAMSS_X1E80100:
ret = true;
@@ -1259,6 +1377,12 @@ static int csiphy_init(struct csiphy_device *csiphy)
regs->lane_regs = &lane_regs_sa8775p[0];
regs->lane_array_size = ARRAY_SIZE(lane_regs_sa8775p);
break;
+ case CAMSS_8750:
+ regs->lane_regs = &lane_regs_sm8750[0];
+ regs->lane_array_size = ARRAY_SIZE(lane_regs_sm8750);
+ regs->offset = 0x1000;
+ regs->common_status_offset = 0x138;
+ break;
default:
break;
}
diff --git a/drivers/media/platform/qcom/camss/camss.h b/drivers/media/platform/qcom/camss/camss.h
index 93d691c8a..ef45eea00 100644
--- a/drivers/media/platform/qcom/camss/camss.h
+++ b/drivers/media/platform/qcom/camss/camss.h
@@ -95,6 +95,7 @@ enum camss_version {
CAMSS_845,
CAMSS_8550,
CAMSS_8650,
+ CAMSS_8750,
CAMSS_8775P,
CAMSS_X1E80100,
};
^ permalink raw reply [flat|nested] 18+ messages in thread* [PATCH v2 3/9] media: camss: csid: unwind the power-on path through a single error label
2026-10-28 9:29 [PATCH v2 0/9] media: camss: add SM8750 support Qianhui Xu
2026-10-28 9:29 ` [PATCH v2 1/9] dt-bindings: media: add the Qualcomm SM8750 camera subsystem Qianhui Xu
2026-10-28 9:29 ` [PATCH v2 2/9] media: camss: csiphy: add CSIPHY 2.4.0 lane settings for SM8750 Qianhui Xu
@ 2026-10-28 9:29 ` Qianhui Xu
2026-10-28 9:29 ` [PATCH v2 4/9] media: camss: csid: add the 980 generation Qianhui Xu
` (8 subsequent siblings)
11 siblings, 0 replies; 18+ messages in thread
From: Qianhui Xu @ 2026-10-28 9:29 UTC (permalink / raw)
To: 'Bryan O'Donoghue', Mauro Carvalho Chehab
Cc: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Bjorn Andersson,
Konrad Dybcio, Hangxiang Ma, linux-media, linux-arm-msm,
devicetree, linux-kernel
csid_set_power() repeats the same cleanup sequence in every error branch
and gets it wrong in the first one: when pm_runtime_resume_and_get()
fails, the parent device reference taken by parent_dev_ops->get() is
never dropped, so a failing power-on leaks it and the matching VFE stays
powered.
Replace the four open-coded unwind blocks with gotos to a shared label
chain and route the pm_runtime failure through the parent put as well.
No functional change on the success path.
Signed-off-by: Qianhui Xu <xiaqinghuan@mail.ustc.edu.cn>
---
.../media/platform/qcom/camss/camss-csid.c | 45 +++++++++----------
1 file changed, 20 insertions(+), 25 deletions(-)
diff --git a/drivers/media/platform/qcom/camss/camss-csid.c b/drivers/media/platform/qcom/camss/camss-csid.c
index 48459b46a..592c1dfc9 100644
--- a/drivers/media/platform/qcom/camss/camss-csid.c
+++ b/drivers/media/platform/qcom/camss/camss-csid.c
@@ -696,44 +696,28 @@ static int csid_set_power(struct v4l2_subdev *sd, int on)
ret = pm_runtime_resume_and_get(dev);
if (ret < 0)
- return ret;
+ goto put_parent;
ret = regulator_bulk_enable(csid->num_supplies,
csid->supplies);
- if (ret < 0) {
- pm_runtime_put_sync(dev);
- return ret;
- }
+ if (ret < 0)
+ goto put_pm;
ret = csid_set_clock_rates(csid);
- if (ret < 0) {
- regulator_bulk_disable(csid->num_supplies,
- csid->supplies);
- pm_runtime_put_sync(dev);
- return ret;
- }
+ if (ret < 0)
+ goto disable_regulators;
ret = camss_enable_clocks(csid->nclocks, csid->clock, dev);
- if (ret < 0) {
- regulator_bulk_disable(csid->num_supplies,
- csid->supplies);
- pm_runtime_put_sync(dev);
- return ret;
- }
+ if (ret < 0)
+ goto disable_regulators;
csid->phy.need_vc_update = true;
enable_irq(csid->irq);
ret = csid->res->hw_ops->reset(csid);
- if (ret < 0) {
- disable_irq(csid->irq);
- camss_disable_clocks(csid->nclocks, csid->clock);
- regulator_bulk_disable(csid->num_supplies,
- csid->supplies);
- pm_runtime_put_sync(dev);
- return ret;
- }
+ if (ret < 0)
+ goto disable_clocks;
csid->res->hw_ops->hw_version(csid);
} else {
@@ -746,6 +730,17 @@ static int csid_set_power(struct v4l2_subdev *sd, int on)
}
return ret;
+
+disable_clocks:
+ disable_irq(csid->irq);
+ camss_disable_clocks(csid->nclocks, csid->clock);
+disable_regulators:
+ regulator_bulk_disable(csid->num_supplies, csid->supplies);
+put_pm:
+ pm_runtime_put_sync(dev);
+put_parent:
+ csid->res->parent_dev_ops->put(camss, csid->id);
+ return ret;
}
/*
^ permalink raw reply [flat|nested] 18+ messages in thread* [PATCH v2 4/9] media: camss: csid: add the 980 generation
2026-10-28 9:29 [PATCH v2 0/9] media: camss: add SM8750 support Qianhui Xu
` (2 preceding siblings ...)
2026-10-28 9:29 ` [PATCH v2 3/9] media: camss: csid: unwind the power-on path through a single error label Qianhui Xu
@ 2026-10-28 9:29 ` Qianhui Xu
2026-10-28 9:29 ` [PATCH v2 5/9] media: camss: csid: report frame starts from CSID Qianhui Xu
` (7 subsequent siblings)
11 siblings, 0 replies; 18+ messages in thread
From: Qianhui Xu @ 2026-10-28 9:29 UTC (permalink / raw)
To: 'Bryan O'Donoghue', Mauro Carvalho Chehab
Cc: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Bjorn Andersson,
Konrad Dybcio, Hangxiang Ma, linux-media, linux-arm-msm,
devicetree, linux-kernel
The CSID found on SM8750 (call it generation 980) keeps the capture
interrupt reporting of the 680 generation, but moves the register update
completion to per-stream interrupt bits and adds separate start-of-frame
and end-of-frame timestamp registers per RDI stream.
Add camss-csid-980.c with the register maps for both the full and the
lite variants. The full variant splits the register update into separate
RUP and AUP commands that need an extra trigger write, while the lite
variant keeps the combined RUP/AUP command of the previous generations,
so struct csid_device gains dedicated rup_update and aup_update fields
next to the existing combined reg_update.
Only the register map, the RDI stream configuration and the buffer-done
reporting are described here; frame start reporting is added on top of it
by a separate change.
Signed-off-by: Qianhui Xu <xiaqinghuan@mail.ustc.edu.cn>
---
drivers/media/platform/qcom/camss/Makefile | 1 +
.../platform/qcom/camss/camss-csid-980.c | 443 ++++++++++++++++++
.../media/platform/qcom/camss/camss-csid.h | 3 +
.../qcom/camss/camss-csiphy-3ph-1-0.c | 8 +-
drivers/media/platform/qcom/camss/camss-vfe.c | 15 +-
drivers/media/platform/qcom/camss/camss-vfe.h | 2 +
6 files changed, 464 insertions(+), 8 deletions(-)
create mode 100644 drivers/media/platform/qcom/camss/camss-csid-980.c
diff --git a/drivers/media/platform/qcom/camss/Makefile b/drivers/media/platform/qcom/camss/Makefile
index 27898b3cc..348da1ccc 100644
--- a/drivers/media/platform/qcom/camss/Makefile
+++ b/drivers/media/platform/qcom/camss/Makefile
@@ -8,6 +8,7 @@ qcom-camss-objs += \
camss-csid-4-7.o \
camss-csid-340.o \
camss-csid-680.o \
+ camss-csid-980.o \
camss-csid-gen2.o \
camss-csid-gen3.o \
camss-csiphy.o \
diff --git a/drivers/media/platform/qcom/camss/camss-csid-980.c b/drivers/media/platform/qcom/camss/camss-csid-980.c
new file mode 100644
index 000000000..09139815c
--- /dev/null
+++ b/drivers/media/platform/qcom/camss/camss-csid-980.c
@@ -0,0 +1,443 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * camss-csid-980.c
+ *
+ * Qualcomm MSM Camera Subsystem - CSID (CSI Decoder) Module
+ *
+ * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
+ */
+#include <linux/completion.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include "camss.h"
+#include "camss-csid.h"
+#include "camss-csid-gen3.h"
+
+/* Reset and Command Registers */
+#define CSID_RST_CFG 0xC
+#define RST_MODE BIT(0)
+#define RST_LOCATION BIT(4)
+
+/* Reset and Command Registers */
+#define CSID_RST_CMD 0x10
+#define SELECT_HW_RST BIT(0)
+#define SELECT_IRQ_RST BIT(2)
+#define CSID_IRQ_CMD 0x14
+#define IRQ_CMD_CLEAR BIT(0)
+
+/* Register Update Commands, RUP/AUP */
+#define CSID_RUP_CMD 0x18
+#define CSID_AUP_CMD 0x1C
+#define CSID_RUP_AUP_RDI(rdi) (BIT(8) << (rdi))
+#define CSID_RUP_AUP_CMD 0x20
+#define RUP_SET BIT(0)
+
+#define CSID_LITE_RUP_AUP_CMD 0x18
+#define CSID_LITE_RUP_RDI(rdi) (BIT(4) << (rdi))
+#define CSID_LITE_AUP_RDI(rdi) (BIT(20) << (rdi))
+
+/* Top level interrupt registers */
+#define CSID_TOP_IRQ_STATUS (csid_is_lite(csid) ? 0x7C : 0x84)
+#define CSID_TOP_IRQ_MASK (csid_is_lite(csid) ? 0x80 : 0x88)
+#define CSID_TOP_IRQ_CLEAR (csid_is_lite(csid) ? 0x84 : 0x8C)
+#define INFO_RST_DONE BIT(0)
+#define BUF_DONE_IRQ_STATUS BIT(csid_is_lite(csid) ? 13 : 3)
+
+/* Buffer done interrupt registers */
+#define CSID_BUF_DONE_IRQ_STATUS (csid_is_lite(csid) ? 0x8C : 0xA4)
+#define BUF_DONE_IRQ_STATUS_RDI_OFFSET (csid_is_lite(csid) ? 1 : 16)
+#define CSID_BUF_DONE_IRQ_MASK (csid_is_lite(csid) ? 0x90 : 0xA8)
+#define CSID_BUF_DONE_IRQ_CLEAR (csid_is_lite(csid) ? 0x94 : 0xAC)
+
+/* CSI2 RX Configuration */
+#define CSID_CSI2_RX_CFG0 (csid_is_lite(csid) ? 0x200 : 0x400)
+#define CSI2_RX_CFG0_NUM_ACTIVE_LANES 0
+#define CSI2_RX_CFG0_PHY_SEL_BASE_IDX 1
+#define CSI2_RX_CFG0_DL0_INPUT_SEL 4
+#define CSI2_RX_CFG0_PHY_NUM_SEL 20
+#define CSID_CSI2_RX_CFG1 (csid_is_lite(csid) ? 0x204 : 0x404)
+#define CSI2_RX_CFG1_ECC_CORRECTION_EN BIT(0)
+#define CSI2_RX_CFG1_VC_MODE BIT(2)
+
+#define MSM_CSID_MAX_SRC_STREAMS_980 (csid_is_lite(csid) ? 4 : 5)
+
+#define CSID_RDI_CFG0(rdi) \
+ ({ \
+ __typeof__(rdi) _rdi = (rdi); \
+ csid_is_lite(csid) ? 0x500 + 0x100 * _rdi : \
+ 0xE00 + 0x200 * _rdi; \
+ })
+#define RDI_CFG0_RETIME_BS BIT(5)
+#define RDI_CFG0_TIMESTAMP_EN BIT(6)
+#define RDI_CFG0_TIMESTAMP_STB_SEL BIT(8)
+#define RDI_CFG0_DECODE_FORMAT 12
+#define RDI_CFG0_DT 16
+#define RDI_CFG0_VC 22
+#define RDI_CFG0_DT_ID 27
+#define RDI_CFG0_EN BIT(31)
+
+/* RDI Control and Configuration */
+#define CSID_RDI_CTRL(rdi) \
+ ({ \
+ __typeof__(rdi) _rdi = (rdi); \
+ csid_is_lite(csid) ? 0x504 + 0x100 * _rdi : \
+ 0xE04 + 0x200 * _rdi; \
+ })
+#define RDI_CTRL_START_CMD BIT(0)
+
+#define CSID_RDI_CFG1(rdi) \
+ ({ \
+ __typeof__(rdi) _rdi = (rdi); \
+ csid_is_lite(csid) ? 0x510 + 0x100 * _rdi : \
+ 0xE10 + 0x200 * _rdi; \
+ })
+#define RDI_CFG1_PACKING_FORMAT_MIPI BIT(15)
+
+/* RDI Pixel Store Configuration */
+#define CSID_RDI_PIX_STORE_CFG0(rdi) (0xE14 + 0x200 * (rdi))
+#define RDI_PIX_STORE_CFG0_EN BIT(0)
+#define RDI_PIX_STORE_CFG0_MIN_HBI 1
+
+/* RDI IRQ Status in wrapper */
+#define CSID_CSI2_RDIN_IRQ_STATUS(rdi) \
+ ((csid_is_lite(csid) ? 0xEC : 0x114) + 0x10 * (rdi))
+#define CSID_CSI2_RDIN_IRQ_MASK(rdi) \
+ ((csid_is_lite(csid) ? 0xF0 : 0x118) + 0x10 * (rdi))
+#define CSID_CSI2_RDIN_IRQ_CLEAR(rdi) \
+ ((csid_is_lite(csid) ? 0xF4 : 0x11C) + 0x10 * (rdi))
+#define INFO_RUP_DONE BIT(23)
+#define CSID_RDI_TOP_IRQ(rdi) BIT((csid_is_lite(csid) ? 8 : 16) + (rdi))
+#define CSID_RDI_IRQ_PATTERN(rdi) \
+ ((csid_is_lite(csid) ? 0x548 : 0xE50) + (csid_is_lite(csid) ? 0x100 : 0x200) * (rdi))
+#define CSID_RDI_IRQ_PERIOD(rdi) (CSID_RDI_IRQ_PATTERN(rdi) + 4)
+#define CSID_RDI_SOF_TS(rdi) \
+ ((csid_is_lite(csid) ? 0x594 : 0xEA0) + (csid_is_lite(csid) ? 0x100 : 0x200) * (rdi))
+#define CSID_RDI_EOF_TS(rdi) (CSID_RDI_SOF_TS(rdi) + 0x10)
+
+static void __csid_full_aup_rup_trigger(struct csid_device *csid)
+{
+ /* trigger SET in combined register */
+ writel(RUP_SET, csid->base + CSID_RUP_AUP_CMD);
+}
+
+static void __csid_aup_update(struct csid_device *csid, int port_id)
+{
+ if (csid_is_lite(csid)) {
+ /* CSID Lites in v980 follow the legacy way of a combined RUP
+ * and AUP commands without an explicit SET register.
+ */
+ csid->reg_update |= CSID_LITE_AUP_RDI(port_id);
+ writel(csid->reg_update, csid->base + CSID_LITE_RUP_AUP_CMD);
+ } else {
+ csid->aup_update |= CSID_RUP_AUP_RDI(port_id);
+ writel(csid->aup_update, csid->base + CSID_AUP_CMD);
+
+ /* CSID Fulls in v980 split AUP and RUP commands, which requires
+ * additional SET operation to make registers modification take
+ * effect.
+ */
+ __csid_full_aup_rup_trigger(csid);
+ }
+}
+
+static void __csid_rup_update(struct csid_device *csid, int port_id)
+{
+ if (csid_is_lite(csid)) {
+ /* CSID Lites in v980 follow the legacy way of a combined RUP
+ * and AUP commands without an explicit SET register.
+ */
+ csid->reg_update |= CSID_LITE_RUP_RDI(port_id);
+ writel(csid->reg_update, csid->base + CSID_LITE_RUP_AUP_CMD);
+ } else {
+ csid->rup_update |= CSID_RUP_AUP_RDI(port_id);
+ writel(csid->rup_update, csid->base + CSID_RUP_CMD);
+
+ /* CSID Fulls in v980 split AUP and RUP commands, which requires
+ * additional SET operation to make registers modification take
+ * effect.
+ */
+ __csid_full_aup_rup_trigger(csid);
+ }
+}
+
+static void __csid_aup_rup_clear(struct csid_device *csid, int port_id)
+{
+ /* Hardware clears the registers upon consuming the settings */
+ if (csid_is_lite(csid)) {
+ csid->reg_update &= ~CSID_LITE_RUP_RDI(port_id);
+ csid->reg_update &= ~CSID_LITE_AUP_RDI(port_id);
+ } else {
+ csid->aup_update &= ~CSID_RUP_AUP_RDI(port_id);
+ csid->rup_update &= ~CSID_RUP_AUP_RDI(port_id);
+ }
+}
+
+static void __csid_configure_rx(struct csid_device *csid,
+ struct csid_phy_config *phy)
+{
+ int val;
+
+ val = (phy->lane_cnt - 1) << CSI2_RX_CFG0_NUM_ACTIVE_LANES;
+ val |= phy->lane_assign << CSI2_RX_CFG0_DL0_INPUT_SEL;
+ val |= (phy->csiphy_id + CSI2_RX_CFG0_PHY_SEL_BASE_IDX)
+ << CSI2_RX_CFG0_PHY_NUM_SEL;
+ writel(val, csid->base + CSID_CSI2_RX_CFG0);
+
+ val = CSI2_RX_CFG1_ECC_CORRECTION_EN;
+ writel(val, csid->base + CSID_CSI2_RX_CFG1);
+}
+
+static void __csid_configure_rx_vc(struct csid_device *csid, int vc)
+{
+ int val;
+
+ if (vc > 3) {
+ val = readl(csid->base + CSID_CSI2_RX_CFG1);
+ val |= CSI2_RX_CFG1_VC_MODE;
+ writel(val, csid->base + CSID_CSI2_RX_CFG1);
+ }
+}
+
+static void __csid_ctrl_rdi(struct csid_device *csid, int enable, u8 rdi)
+{
+ int val = 0;
+ u32 rdi_ctrl_offset = CSID_RDI_CTRL(rdi);
+
+ if (enable)
+ val = RDI_CTRL_START_CMD;
+
+ writel(val, csid->base + rdi_ctrl_offset);
+}
+
+static void __csid_configure_rdi_pix_store(struct csid_device *csid, u8 rdi)
+{
+ u32 val;
+
+ /*
+ * Configure pixel store to allow absorption of hblanking or idle time.
+ * This helps with horizontal crop and prevents line buffer conflicts.
+ * Reset state is 0x8 which has MIN_HBI=4, we keep the default MIN_HBI
+ * and just enable the pixel store functionality.
+ */
+ val = (4 << RDI_PIX_STORE_CFG0_MIN_HBI) | RDI_PIX_STORE_CFG0_EN;
+ writel(val, csid->base + CSID_RDI_PIX_STORE_CFG0(rdi));
+}
+
+static void __csid_configure_rdi_stream(struct csid_device *csid, u8 enable, u8 port, u8 vc)
+{
+ u32 val;
+
+ /* Source pads matching RDI channels on hardware.
+ * E.g. Pad 1 -> RDI0, Pad 2 -> RDI1, etc.
+ */
+ struct v4l2_mbus_framefmt *input_format = &csid->fmt[MSM_CSID_PAD_FIRST_SRC + port];
+ const struct csid_format_info *format = csid_get_fmt_entry(csid->res->formats->formats,
+ csid->res->formats->nformats,
+ input_format->code);
+
+ /*
+ * DT_ID is a two bit bitfield that is concatenated with
+ * the four least significant bits of the five bit VC
+ * bitfield to generate an internal CID value.
+ *
+ * CSID_RDI_CFG0(vc)
+ * DT_ID : 28:27
+ * VC : 26:22
+ * DT : 21:16
+ *
+ * CID : VC 3:0 << 2 | DT_ID 1:0
+ */
+ u8 dt_id = port & 0x03;
+ u32 rdi_cfg0_offset = CSID_RDI_CFG0(port);
+ u32 rdi_cfg1_offset = CSID_RDI_CFG1(port);
+ u32 rdi_ctrl_offset = CSID_RDI_CTRL(port);
+
+ val = RDI_CFG0_TIMESTAMP_EN;
+ val |= RDI_CFG0_TIMESTAMP_STB_SEL;
+ val |= RDI_CFG0_RETIME_BS;
+
+ /* note: for non-RDI path, this should be format->decode_format */
+ val |= DECODE_FORMAT_PAYLOAD_ONLY << RDI_CFG0_DECODE_FORMAT;
+ val |= vc << RDI_CFG0_VC;
+ val |= format->data_type << RDI_CFG0_DT;
+ val |= dt_id << RDI_CFG0_DT_ID;
+ writel(val, csid->base + rdi_cfg0_offset);
+
+ val = RDI_CFG1_PACKING_FORMAT_MIPI;
+ writel(val, csid->base + rdi_cfg1_offset);
+ writel(1, csid->base + CSID_RDI_IRQ_PATTERN(port));
+ writel(0, csid->base + CSID_RDI_IRQ_PERIOD(port));
+
+ /* Configure pixel store using dedicated register in 980 */
+ if (!csid_is_lite(csid))
+ __csid_configure_rdi_pix_store(csid, port);
+
+ val = 0;
+ writel(val, csid->base + rdi_ctrl_offset);
+
+ val = readl(csid->base + rdi_cfg0_offset);
+
+ if (enable)
+ val |= RDI_CFG0_EN;
+
+ writel(val, csid->base + rdi_cfg0_offset);
+}
+
+static void csid_configure_stream(struct csid_device *csid, u8 enable)
+{
+ u8 i, k;
+
+ __csid_configure_rx(csid, &csid->phy);
+
+ for (i = 0; i < MSM_CSID_MAX_SRC_STREAMS_980; i++) {
+ if (csid->phy.en_vc & BIT(i)) {
+ u32 mask = readl(csid->base + CSID_CSI2_RDIN_IRQ_MASK(i));
+
+ writel(mask, csid->base + CSID_CSI2_RDIN_IRQ_MASK(i));
+ mask = readl(csid->base + CSID_TOP_IRQ_MASK);
+ mask = enable ? mask | CSID_RDI_TOP_IRQ(i) : mask & ~CSID_RDI_TOP_IRQ(i);
+ writel(mask, csid->base + CSID_TOP_IRQ_MASK);
+ writel(IRQ_CMD_CLEAR, csid->base + CSID_IRQ_CMD);
+ __csid_configure_rdi_stream(csid, enable, i, 0);
+ __csid_configure_rx_vc(csid, 0);
+
+ for (k = 0; enable && k < CAMSS_INIT_BUF_COUNT; k++) {
+ __csid_aup_update(csid, i);
+ __csid_rup_update(csid, i);
+ }
+
+ __csid_ctrl_rdi(csid, enable, i);
+ }
+ }
+}
+
+static int csid_configure_testgen_pattern(struct csid_device *csid, s32 val)
+{
+ return 0;
+}
+
+static void csid_subdev_reg_update(struct csid_device *csid, int port_id,
+ bool clear)
+{
+ if (clear)
+ __csid_aup_rup_clear(csid, port_id);
+ else
+ __csid_aup_update(csid, port_id);
+}
+
+/**
+ * csid_isr - CSID module interrupt service routine
+ * @irq: Interrupt line
+ * @dev: CSID device
+ *
+ * Return IRQ_HANDLED on success
+ */
+static irqreturn_t csid_isr(int irq, void *dev)
+{
+ struct csid_device *csid = dev;
+ u32 val, buf_done_val;
+ u8 reset_done;
+ int i;
+
+ val = readl(csid->base + CSID_TOP_IRQ_STATUS);
+ writel(val, csid->base + CSID_TOP_IRQ_CLEAR);
+
+ reset_done = val & INFO_RST_DONE;
+
+ buf_done_val = readl(csid->base + CSID_BUF_DONE_IRQ_STATUS);
+ writel(buf_done_val, csid->base + CSID_BUF_DONE_IRQ_CLEAR);
+
+ for (i = 0; i < MSM_CSID_MAX_SRC_STREAMS_980; i++) {
+ if (csid->phy.en_vc & BIT(i)) {
+ bool done = buf_done_val & BIT(BUF_DONE_IRQ_STATUS_RDI_OFFSET + i);
+
+ val = readl(csid->base + CSID_CSI2_RDIN_IRQ_STATUS(i));
+ writel(val, csid->base + CSID_CSI2_RDIN_IRQ_CLEAR(i));
+
+ if (val & INFO_RUP_DONE)
+ csid_subdev_reg_update(csid, i, true);
+
+ if (done)
+ camss_buf_done(csid->camss, csid->id, i);
+ }
+ }
+
+ val = IRQ_CMD_CLEAR;
+ writel(val, csid->base + CSID_IRQ_CMD);
+
+ if (reset_done)
+ complete(&csid->reset_complete);
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * csid_reset - Trigger reset on CSID module and wait to complete
+ * @csid: CSID device
+ *
+ * Return 0 on success or a negative error code otherwise
+ */
+static int csid_reset(struct csid_device *csid)
+{
+ unsigned long time;
+ u32 val;
+ int i;
+
+ reinit_completion(&csid->reset_complete);
+
+ val = INFO_RST_DONE | BUF_DONE_IRQ_STATUS;
+ writel(val, csid->base + CSID_TOP_IRQ_CLEAR);
+ writel(val, csid->base + CSID_TOP_IRQ_MASK);
+
+ val = 0;
+ for (i = 0; i < MSM_CSID_MAX_SRC_STREAMS_980; i++) {
+ if (csid->phy.en_vc & BIT(i)) {
+ /*
+ * Only need to clear buf done IRQ status here,
+ * RUP done IRQ status will be cleared once isr
+ * strobe generated by CSID_RST_CMD
+ */
+ val |= BIT(BUF_DONE_IRQ_STATUS_RDI_OFFSET + i);
+ }
+ }
+ writel(val, csid->base + CSID_BUF_DONE_IRQ_CLEAR);
+ writel(val, csid->base + CSID_BUF_DONE_IRQ_MASK);
+
+ /* Clear all IRQ status with CLEAR bits set */
+ val = IRQ_CMD_CLEAR;
+ writel(val, csid->base + CSID_IRQ_CMD);
+
+ val = RST_LOCATION | RST_MODE;
+ writel(val, csid->base + CSID_RST_CFG);
+
+ val = SELECT_HW_RST | SELECT_IRQ_RST;
+ writel(val, csid->base + CSID_RST_CMD);
+
+ time = wait_for_completion_timeout(&csid->reset_complete,
+ msecs_to_jiffies(CSID_RESET_TIMEOUT_MS));
+
+ if (!time) {
+ dev_err(csid->camss->dev, "CSID reset timeout\n");
+ return -ETIMEDOUT;
+ }
+
+ return 0;
+}
+
+static void csid_subdev_init(struct csid_device *csid)
+{
+ csid->testgen.nmodes = CSID_PAYLOAD_MODE_DISABLED;
+}
+
+const struct csid_hw_ops csid_ops_980 = {
+ .configure_stream = csid_configure_stream,
+ .configure_testgen_pattern = csid_configure_testgen_pattern,
+ .hw_version = csid_hw_version,
+ .isr = csid_isr,
+ .reset = csid_reset,
+ .src_pad_code = csid_src_pad_code,
+ .subdev_init = csid_subdev_init,
+ .reg_update = csid_subdev_reg_update,
+};
diff --git a/drivers/media/platform/qcom/camss/camss-csid.h b/drivers/media/platform/qcom/camss/camss-csid.h
index 5296b10f6..5d07cffb6 100644
--- a/drivers/media/platform/qcom/camss/camss-csid.h
+++ b/drivers/media/platform/qcom/camss/camss-csid.h
@@ -155,6 +155,8 @@ struct csid_device {
u32 irq;
char irq_name[30];
u32 reg_update;
+ u32 rup_update;
+ u32 aup_update;
struct camss_clock *clock;
int nclocks;
struct regulator_bulk_data *supplies;
@@ -216,6 +218,7 @@ extern const struct csid_hw_ops csid_ops_4_1;
extern const struct csid_hw_ops csid_ops_4_7;
extern const struct csid_hw_ops csid_ops_340;
extern const struct csid_hw_ops csid_ops_680;
+extern const struct csid_hw_ops csid_ops_980;
extern const struct csid_hw_ops csid_ops_gen2;
extern const struct csid_hw_ops csid_ops_gen3;
diff --git a/drivers/media/platform/qcom/camss/camss-csiphy-3ph-1-0.c b/drivers/media/platform/qcom/camss/camss-csiphy-3ph-1-0.c
index 9cf22ff17..999f92fbe 100644
--- a/drivers/media/platform/qcom/camss/camss-csiphy-3ph-1-0.c
+++ b/drivers/media/platform/qcom/camss/camss-csiphy-3ph-1-0.c
@@ -826,7 +826,7 @@ csiphy_lane_regs lane_regs_sm8750[] = {
{0x0008, 0x19, 0x00, CSIPHY_SETTLE_CNT_LOWER_BYTE},
{0x0010, 0x52, 0x00, CSIPHY_DEFAULT_PARAMS},
{0x0094, 0xD7, 0x00, CSIPHY_SKEW_CAL},
- {0x005C, 0x54, 0x00, CSIPHY_SKEW_CAL},
+ {0x005C, 0x00, 0x00, CSIPHY_SKEW_CAL},
{0x0060, 0xFD, 0x00, CSIPHY_SKEW_CAL},
{0x0064, 0x7F, 0x00, CSIPHY_SKEW_CAL},
@@ -849,7 +849,7 @@ csiphy_lane_regs lane_regs_sm8750[] = {
{0x0408, 0x19, 0x00, CSIPHY_SETTLE_CNT_LOWER_BYTE},
{0x0410, 0x52, 0x00, CSIPHY_DEFAULT_PARAMS},
{0x0494, 0xD7, 0x00, CSIPHY_SKEW_CAL},
- {0x045C, 0x54, 0x00, CSIPHY_SKEW_CAL},
+ {0x045C, 0x00, 0x00, CSIPHY_SKEW_CAL},
{0x0460, 0xFD, 0x00, CSIPHY_SKEW_CAL},
{0x0464, 0x7F, 0x00, CSIPHY_SKEW_CAL},
@@ -872,7 +872,7 @@ csiphy_lane_regs lane_regs_sm8750[] = {
{0x0808, 0x19, 0x00, CSIPHY_SETTLE_CNT_LOWER_BYTE},
{0x0810, 0x52, 0x00, CSIPHY_DEFAULT_PARAMS},
{0x0894, 0xD7, 0x00, CSIPHY_SKEW_CAL},
- {0x085C, 0x54, 0x00, CSIPHY_SKEW_CAL},
+ {0x085C, 0x00, 0x00, CSIPHY_SKEW_CAL},
{0x0860, 0xFD, 0x00, CSIPHY_SKEW_CAL},
{0x0864, 0x7F, 0x00, CSIPHY_SKEW_CAL},
@@ -895,7 +895,7 @@ csiphy_lane_regs lane_regs_sm8750[] = {
{0x0C08, 0x19, 0x00, CSIPHY_SETTLE_CNT_LOWER_BYTE},
{0x0C10, 0x52, 0x00, CSIPHY_DEFAULT_PARAMS},
{0x0C94, 0xD7, 0x00, CSIPHY_SKEW_CAL},
- {0x0C5C, 0x54, 0x00, CSIPHY_SKEW_CAL},
+ {0x0C5C, 0x00, 0x00, CSIPHY_SKEW_CAL},
{0x0C60, 0xFD, 0x00, CSIPHY_SKEW_CAL},
{0x0C64, 0x7F, 0x00, CSIPHY_SKEW_CAL},
diff --git a/drivers/media/platform/qcom/camss/camss-vfe.c b/drivers/media/platform/qcom/camss/camss-vfe.c
index 319d19158..d1b66033a 100644
--- a/drivers/media/platform/qcom/camss/camss-vfe.c
+++ b/drivers/media/platform/qcom/camss/camss-vfe.c
@@ -20,6 +20,7 @@
#include <linux/spinlock.h>
#include <media/media-entity.h>
#include <media/v4l2-device.h>
+#include <media/v4l2-event.h>
#include <media/v4l2-subdev.h>
#include "camss-vfe.h"
@@ -352,6 +353,7 @@ static u32 vfe_src_pad_code(struct vfe_line *line, u32 sink_code,
case CAMSS_845:
case CAMSS_8550:
case CAMSS_8650:
+ case CAMSS_8750:
case CAMSS_8775P:
case CAMSS_X1E80100:
switch (sink_code) {
@@ -449,13 +451,14 @@ u32 vfe_hw_version(struct vfe_device *vfe)
*/
void vfe_buf_done(struct vfe_device *vfe, int wm)
{
- struct vfe_line *line = &vfe->line[vfe->wm_output_map[wm]];
+ struct vfe_line *line;
const struct vfe_hw_ops *ops = vfe->res->hw_ops;
struct camss_buffer *ready_buf;
struct vfe_output *output;
unsigned long flags;
u32 index;
u64 ts = ktime_get_ns();
+ enum vb2_buffer_state state = VB2_BUF_STATE_DONE;
spin_lock_irqsave(&vfe->output_lock, flags);
@@ -464,7 +467,8 @@ void vfe_buf_done(struct vfe_device *vfe, int wm)
"Received wm done for unmapped index\n");
goto out_unlock;
}
- output = &vfe->line[vfe->wm_output_map[wm]].output;
+ line = &vfe->line[vfe->wm_output_map[wm]];
+ output = &line->output;
ready_buf = output->buf[0];
if (!ready_buf) {
@@ -494,7 +498,7 @@ void vfe_buf_done(struct vfe_device *vfe, int wm)
spin_unlock_irqrestore(&vfe->output_lock, flags);
- vb2_buffer_done(&ready_buf->vb.vb2_buf, VB2_BUF_STATE_DONE);
+ vb2_buffer_done(&ready_buf->vb.vb2_buf, state);
return;
@@ -552,7 +556,9 @@ int vfe_enable_output_v2(struct vfe_line *line)
output->gen2.active_num++;
ops->vfe_wm_update(vfe, output->wm_idx[0],
output->buf[i]->addr[0], line);
- ops->reg_update(vfe, line->id);
+
+ if (!vfe->res->reg_update_after_csid_config)
+ ops->reg_update(vfe, line->id);
}
spin_unlock_irqrestore(&vfe->output_lock, flags);
@@ -2012,6 +2018,7 @@ static int vfe_bpl_align_rdi(struct vfe_device *vfe)
case CAMSS_845:
case CAMSS_8550:
case CAMSS_8650:
+ case CAMSS_8750:
case CAMSS_8775P:
case CAMSS_X1E80100:
ret = 16;
diff --git a/drivers/media/platform/qcom/camss/camss-vfe.h b/drivers/media/platform/qcom/camss/camss-vfe.h
index ae9dad353..c402ef170 100644
--- a/drivers/media/platform/qcom/camss/camss-vfe.h
+++ b/drivers/media/platform/qcom/camss/camss-vfe.h
@@ -133,6 +133,7 @@ struct vfe_isr_ops {
struct vfe_subdev_resources {
bool is_lite;
+ bool reg_update_after_csid_config;
u8 line_num;
bool has_pd;
char *pd_name;
@@ -249,6 +250,7 @@ extern const struct vfe_hw_ops vfe_ops_340;
extern const struct vfe_hw_ops vfe_ops_480;
extern const struct vfe_hw_ops vfe_ops_680;
extern const struct vfe_hw_ops vfe_ops_gen3;
+extern const struct vfe_hw_ops vfe_ops_gen4;
int vfe_get(struct vfe_device *vfe);
void vfe_put(struct vfe_device *vfe);
^ permalink raw reply [flat|nested] 18+ messages in thread* [PATCH v2 5/9] media: camss: csid: report frame starts from CSID
2026-10-28 9:29 [PATCH v2 0/9] media: camss: add SM8750 support Qianhui Xu
` (3 preceding siblings ...)
2026-10-28 9:29 ` [PATCH v2 4/9] media: camss: csid: add the 980 generation Qianhui Xu
@ 2026-10-28 9:29 ` Qianhui Xu
2026-10-28 12:30 ` Bryan O'Donoghue
2026-10-28 9:30 ` [PATCH v2 6/9] media: camss: video: check that a buffer is DMA contiguous and add a prepare hook Qianhui Xu
` (6 subsequent siblings)
11 siblings, 1 reply; 18+ messages in thread
From: Qianhui Xu @ 2026-10-28 9:29 UTC (permalink / raw)
To: 'Bryan O'Donoghue', Mauro Carvalho Chehab
Cc: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Bjorn Andersson,
Konrad Dybcio, Hangxiang Ma, linux-media, linux-arm-msm,
devicetree, linux-kernel
The CSID of generation 980 moves the capture interrupts away from the VFE:
that VFE has no useful interrupt sources, and the CSID reports RDI buffer
done, register update completion and CAMIF start-of-frame per CSI2 stream
instead.
A buffer is only complete once its frame started, and the sequence number
of a frame is defined by its start: turn the CSID start-of-frame interrupt
into the frame start source. camss_frame_start() forwards it to the
paired VFE, which raises V4L2_EVENT_FRAME_SYNC on the video node,
increments the sequence only there, and marks buffers done before their
frame started as erroneous. A start-of-frame may also follow an as-yet
unhandled completion, so the end-of-frame and start-of-frame timestamps are
compared and the completion reported first in that case.
Hardware generations that still report frame starts through the VFE keep
the previous behaviour, as the new vfe_hw_ops callback is only provided by
VFE implementations that need it.
Signed-off-by: Qianhui Xu <xiaqinghuan@mail.ustc.edu.cn>
---
.../platform/qcom/camss/camss-csid-980.c | 27 +++++++++
drivers/media/platform/qcom/camss/camss-vfe.c | 59 ++++++++++++++++++-
drivers/media/platform/qcom/camss/camss-vfe.h | 3 +
drivers/media/platform/qcom/camss/camss.c | 12 ++++
drivers/media/platform/qcom/camss/camss.h | 1 +
5 files changed, 101 insertions(+), 1 deletion(-)
diff --git a/drivers/media/platform/qcom/camss/camss-csid-980.c b/drivers/media/platform/qcom/camss/camss-csid-980.c
index 09139815c..e0ba84f4d 100644
--- a/drivers/media/platform/qcom/camss/camss-csid-980.c
+++ b/drivers/media/platform/qcom/camss/camss-csid-980.c
@@ -108,6 +108,7 @@
#define CSID_CSI2_RDIN_IRQ_CLEAR(rdi) \
((csid_is_lite(csid) ? 0xF4 : 0x11C) + 0x10 * (rdi))
#define INFO_RUP_DONE BIT(23)
+#define INFO_CAMIF_SOF BIT(4)
#define CSID_RDI_TOP_IRQ(rdi) BIT((csid_is_lite(csid) ? 8 : 16) + (rdi))
#define CSID_RDI_IRQ_PATTERN(rdi) \
((csid_is_lite(csid) ? 0x548 : 0xE50) + (csid_is_lite(csid) ? 0x100 : 0x200) * (rdi))
@@ -295,6 +296,10 @@ static void csid_configure_stream(struct csid_device *csid, u8 enable)
if (csid->phy.en_vc & BIT(i)) {
u32 mask = readl(csid->base + CSID_CSI2_RDIN_IRQ_MASK(i));
+ writel(INFO_CAMIF_SOF | INFO_RUP_DONE,
+ csid->base + CSID_CSI2_RDIN_IRQ_CLEAR(i));
+ mask = enable ? mask | INFO_CAMIF_SOF | INFO_RUP_DONE
+ : mask & ~(INFO_CAMIF_SOF | INFO_RUP_DONE);
writel(mask, csid->base + CSID_CSI2_RDIN_IRQ_MASK(i));
mask = readl(csid->base + CSID_TOP_IRQ_MASK);
mask = enable ? mask | CSID_RDI_TOP_IRQ(i) : mask & ~CSID_RDI_TOP_IRQ(i);
@@ -327,6 +332,18 @@ static void csid_subdev_reg_update(struct csid_device *csid, int port_id,
__csid_aup_update(csid, port_id);
}
+static u64 csid_read_timestamp(struct csid_device *csid, u32 offset)
+{
+ u32 hi, lo;
+
+ do {
+ hi = readl(csid->base + offset + 4);
+ lo = readl(csid->base + offset);
+ } while (hi != readl(csid->base + offset + 4));
+
+ return (u64)hi << 32 | lo;
+}
+
/**
* csid_isr - CSID module interrupt service routine
* @irq: Interrupt line
@@ -359,6 +376,16 @@ static irqreturn_t csid_isr(int irq, void *dev)
if (val & INFO_RUP_DONE)
csid_subdev_reg_update(csid, i, true);
+ if (val & INFO_CAMIF_SOF) {
+ /* A new SOF may follow an as-yet unhandled completion. */
+ if (done && csid_read_timestamp(csid, CSID_RDI_EOF_TS(i)) <
+ csid_read_timestamp(csid, CSID_RDI_SOF_TS(i))) {
+ camss_buf_done(csid->camss, csid->id, i);
+ done = false;
+ }
+ camss_frame_start(csid->camss, csid->id, i);
+ }
+
if (done)
camss_buf_done(csid->camss, csid->id, i);
}
diff --git a/drivers/media/platform/qcom/camss/camss-vfe.c b/drivers/media/platform/qcom/camss/camss-vfe.c
index d1b66033a..070b7feda 100644
--- a/drivers/media/platform/qcom/camss/camss-vfe.c
+++ b/drivers/media/platform/qcom/camss/camss-vfe.c
@@ -444,6 +444,34 @@ u32 vfe_hw_version(struct vfe_device *vfe)
return hw_version;
}
+void vfe_frame_start(struct vfe_device *vfe, int wm)
+{
+ struct v4l2_event event = { .type = V4L2_EVENT_FRAME_SYNC };
+ struct vfe_output *output;
+ struct vfe_line *line;
+ unsigned long flags;
+
+ spin_lock_irqsave(&vfe->output_lock, flags);
+ if (vfe->wm_output_map[wm] == VFE_LINE_NONE)
+ goto out_unlock;
+
+ line = &vfe->line[vfe->wm_output_map[wm]];
+ output = &line->output;
+ if (output->state != VFE_OUTPUT_ON)
+ goto out_unlock;
+
+ /* Count frames even when there is no buffer available for capture. */
+ event.u.frame_sync.frame_sequence = output->sequence++;
+ output->frame_started = true;
+ spin_unlock_irqrestore(&vfe->output_lock, flags);
+
+ v4l2_event_queue(line->subdev.devnode, &event);
+ return;
+
+out_unlock:
+ spin_unlock_irqrestore(&vfe->output_lock, flags);
+}
+
/*
* vfe_buf_done - Process write master done interrupt
* @vfe: VFE Device
@@ -478,7 +506,17 @@ void vfe_buf_done(struct vfe_device *vfe, int wm)
}
ready_buf->vb.vb2_buf.timestamp = ts;
- ready_buf->vb.sequence = output->sequence++;
+ if (ops->frame_start) {
+ if (output->frame_started) {
+ ready_buf->vb.sequence = output->sequence - 1;
+ } else {
+ ready_buf->vb.sequence = output->sequence;
+ state = VB2_BUF_STATE_ERROR;
+ }
+ output->frame_started = false;
+ } else {
+ ready_buf->vb.sequence = output->sequence++;
+ }
index = 0;
output->buf[0] = output->buf[1];
@@ -544,6 +582,7 @@ int vfe_enable_output_v2(struct vfe_line *line)
output->state = VFE_OUTPUT_ON;
output->sequence = 0;
+ output->frame_started = false;
output->wait_reg_update = 0;
reinit_completion(&output->reg_update);
@@ -1972,8 +2011,24 @@ static int vfe_link_setup(struct media_entity *entity,
return 0;
}
+static int vfe_subscribe_event(struct v4l2_subdev *sd, struct v4l2_fh *fh,
+ struct v4l2_event_subscription *sub)
+{
+ struct vfe_line *line = v4l2_get_subdevdata(sd);
+ struct vfe_device *vfe = to_vfe(line);
+
+ if (!vfe->res->hw_ops->frame_start)
+ return -ENOIOCTLCMD;
+
+ if (sub->type != V4L2_EVENT_FRAME_SYNC || sub->id)
+ return -EINVAL;
+
+ return v4l2_event_subscribe(fh, sub, 16, NULL);
+}
+
static const struct v4l2_subdev_core_ops vfe_core_ops = {
.s_power = vfe_set_power,
+ .subscribe_event = vfe_subscribe_event,
};
static const struct v4l2_subdev_video_ops vfe_video_ops = {
@@ -2080,6 +2135,8 @@ int msm_vfe_register_entities(struct vfe_device *vfe,
v4l2_subdev_init(sd, &vfe_v4l2_ops);
sd->internal_ops = &vfe_v4l2_internal_ops;
sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
+ if (vfe->res->hw_ops->frame_start)
+ sd->flags |= V4L2_SUBDEV_FL_HAS_EVENTS;
if (i == VFE_LINE_PIX && vfe->res->is_lite == false)
snprintf(sd->name, ARRAY_SIZE(sd->name), "%s%d_%s",
MSM_VFE_NAME, vfe->id, "pix");
diff --git a/drivers/media/platform/qcom/camss/camss-vfe.h b/drivers/media/platform/qcom/camss/camss-vfe.h
index c402ef170..621eee07d 100644
--- a/drivers/media/platform/qcom/camss/camss-vfe.h
+++ b/drivers/media/platform/qcom/camss/camss-vfe.h
@@ -77,6 +77,7 @@ struct vfe_output {
};
enum vfe_output_state state;
unsigned int sequence;
+ bool frame_started;
int wait_reg_update;
struct completion sof;
@@ -118,6 +119,7 @@ struct vfe_hw_ops {
struct vfe_line *line);
void (*vfe_wm_stop)(struct vfe_device *vfe, u8 wm);
void (*vfe_buf_done)(struct vfe_device *vfe, int port_id);
+ void (*frame_start)(struct vfe_device *vfe, int port_id);
void (*vfe_wm_update)(struct vfe_device *vfe, u8 wm, u32 addr,
struct vfe_line *line);
};
@@ -286,6 +288,7 @@ int vfe_enable_v2(struct vfe_line *line);
* @wm: Write master id
*/
void vfe_buf_done(struct vfe_device *vfe, int wm);
+void vfe_frame_start(struct vfe_device *vfe, int wm);
/*
* vfe_get_output_v2 - Get vfe output line
diff --git a/drivers/media/platform/qcom/camss/camss.c b/drivers/media/platform/qcom/camss/camss.c
index 2123f6388..92d536986 100644
--- a/drivers/media/platform/qcom/camss/camss.c
+++ b/drivers/media/platform/qcom/camss/camss.c
@@ -5044,6 +5044,18 @@ void camss_buf_done(struct camss *camss, int hw_id, int port_id)
}
}
+void camss_frame_start(struct camss *camss, int hw_id, int port_id)
+{
+ struct vfe_device *vfe;
+
+ if (hw_id < 0 || hw_id >= camss->res->vfe_num || port_id < 0)
+ return;
+
+ vfe = &camss->vfe[hw_id];
+ if (port_id < vfe->res->line_num && vfe->res->hw_ops->frame_start)
+ vfe->res->hw_ops->frame_start(vfe, port_id);
+}
+
/*
* camss_register_entities - Register subdev nodes and create links
* @camss: CAMSS device
diff --git a/drivers/media/platform/qcom/camss/camss.h b/drivers/media/platform/qcom/camss/camss.h
index ef45eea00..6a17ec027 100644
--- a/drivers/media/platform/qcom/camss/camss.h
+++ b/drivers/media/platform/qcom/camss/camss.h
@@ -178,6 +178,7 @@ int camss_vfe_get(struct camss *camss, int id);
void camss_vfe_put(struct camss *camss, int id);
void camss_delete(struct camss *camss);
void camss_buf_done(struct camss *camss, int hw_id, int port_id);
+void camss_frame_start(struct camss *camss, int hw_id, int port_id);
void camss_reg_update(struct camss *camss, int hw_id,
int port_id, bool is_clear);
^ permalink raw reply [flat|nested] 18+ messages in thread* Re: [PATCH v2 5/9] media: camss: csid: report frame starts from CSID
2026-10-28 9:29 ` [PATCH v2 5/9] media: camss: csid: report frame starts from CSID Qianhui Xu
@ 2026-10-28 12:30 ` Bryan O'Donoghue
0 siblings, 0 replies; 18+ messages in thread
From: Bryan O'Donoghue @ 2026-10-28 12:30 UTC (permalink / raw)
To: Qianhui Xu, 'Bryan O'Donoghue', Mauro Carvalho Chehab
Cc: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Bjorn Andersson,
Konrad Dybcio, Hangxiang Ma, linux-media, linux-arm-msm,
devicetree, linux-kernel
On 28/10/2026 09:29, Qianhui Xu wrote:
> + if (val & INFO_CAMIF_SOF) {
> + /* A new SOF may follow an as-yet unhandled completion. */
> + if (done && csid_read_timestamp(csid, CSID_RDI_EOF_TS(i)) <
> + csid_read_timestamp(csid, CSID_RDI_SOF_TS(i))) {
> + camss_buf_done(csid->camss, csid->id, i);
SOF and buf done need not happen in the same interrupt and quite likely
won't.
This logic can't hold over idle entry/exit scenarios.
Also I think we need a different approach to latching qtime regs, generally.
In fact let me follow up this email with a series to enable
V4L2_EVENT_FRAME_SYNC which is the right way IMO to latch SOF.
---
bod
^ permalink raw reply [flat|nested] 18+ messages in thread
* [PATCH v2 6/9] media: camss: video: check that a buffer is DMA contiguous and add a prepare hook
2026-10-28 9:29 [PATCH v2 0/9] media: camss: add SM8750 support Qianhui Xu
` (4 preceding siblings ...)
2026-10-28 9:29 ` [PATCH v2 5/9] media: camss: csid: report frame starts from CSID Qianhui Xu
@ 2026-10-28 9:30 ` Qianhui Xu
2026-10-28 12:32 ` Bryan O'Donoghue
2026-10-28 9:30 ` [PATCH v2 7/9] media: camss: video: stop the subdevices already started when a start fails Qianhui Xu
` (5 subsequent siblings)
11 siblings, 1 reply; 18+ messages in thread
From: Qianhui Xu @ 2026-10-28 9:30 UTC (permalink / raw)
To: 'Bryan O'Donoghue', Mauro Carvalho Chehab
Cc: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Bjorn Andersson,
Konrad Dybcio, Hangxiang Ma, linux-media, linux-arm-msm,
devicetree, linux-kernel
The write master of the newer VFE generations can only be programmed with
a buffer whose payload is physically contiguous, because the frame
increment registers describe one linear address range. Check that the DMA
mapping of every plane is contiguous for at least sizeimage bytes and
reject the buffer otherwise, instead of silently writing past the end of
the first scatterlist entry.
Also let the SoC code add its own alignment requirements to a queued
buffer through a new prepare_buffer() video operation, which runs after
the generic checks.
Signed-off-by: Qianhui Xu <xiaqinghuan@mail.ustc.edu.cn>
---
.../media/platform/qcom/camss/camss-video.c | 18 +++++++++++++++++-
.../media/platform/qcom/camss/camss-video.h | 1 +
2 files changed, 18 insertions(+), 1 deletion(-)
diff --git a/drivers/media/platform/qcom/camss/camss-video.c b/drivers/media/platform/qcom/camss/camss-video.c
index 0852eb6f1..027cf024f 100644
--- a/drivers/media/platform/qcom/camss/camss-video.c
+++ b/drivers/media/platform/qcom/camss/camss-video.c
@@ -155,7 +155,10 @@ static int video_buf_init(struct vb2_buffer *vb)
const struct v4l2_pix_format_mplane *format =
&video->active_fmt.fmt.pix_mp;
struct sg_table *sgt;
- unsigned int i;
+ struct scatterlist *sg;
+ dma_addr_t end;
+ unsigned int i, j;
+ size_t contiguous;
for (i = 0; i < format->num_planes; i++) {
sgt = vb2_dma_sg_plane_desc(vb, i);
@@ -163,6 +166,16 @@ static int video_buf_init(struct vb2_buffer *vb)
return -EFAULT;
buffer->addr[i] = sg_dma_address(sgt->sgl);
+ end = buffer->addr[i];
+ contiguous = 0;
+ for_each_sgtable_dma_sg(sgt, sg, j) {
+ if (sg_dma_address(sg) != end)
+ break;
+ contiguous += sg_dma_len(sg);
+ end += sg_dma_len(sg);
+ }
+ if (contiguous < format->plane_fmt[i].sizeimage)
+ return -EINVAL;
}
if (format->pixelformat == V4L2_PIX_FMT_NV12 ||
@@ -193,6 +206,9 @@ static int video_buf_prepare(struct vb2_buffer *vb)
vbuf->field = V4L2_FIELD_NONE;
+ if (video->ops->prepare_buffer)
+ return video->ops->prepare_buffer(video, vb);
+
return 0;
}
diff --git a/drivers/media/platform/qcom/camss/camss-video.h b/drivers/media/platform/qcom/camss/camss-video.h
index d3e56e240..af046ecb7 100644
--- a/drivers/media/platform/qcom/camss/camss-video.h
+++ b/drivers/media/platform/qcom/camss/camss-video.h
@@ -28,6 +28,7 @@ struct camss_buffer {
struct camss_video;
struct camss_video_ops {
+ int (*prepare_buffer)(struct camss_video *vid, struct vb2_buffer *vb);
int (*queue_buffer)(struct camss_video *vid, struct camss_buffer *buf);
int (*flush_buffers)(struct camss_video *vid,
enum vb2_buffer_state state);
^ permalink raw reply [flat|nested] 18+ messages in thread* Re: [PATCH v2 6/9] media: camss: video: check that a buffer is DMA contiguous and add a prepare hook
2026-10-28 9:30 ` [PATCH v2 6/9] media: camss: video: check that a buffer is DMA contiguous and add a prepare hook Qianhui Xu
@ 2026-10-28 12:32 ` Bryan O'Donoghue
0 siblings, 0 replies; 18+ messages in thread
From: Bryan O'Donoghue @ 2026-10-28 12:32 UTC (permalink / raw)
To: Qianhui Xu, 'Bryan O'Donoghue', Mauro Carvalho Chehab
Cc: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Bjorn Andersson,
Konrad Dybcio, Hangxiang Ma, linux-media, linux-arm-msm,
devicetree, linux-kernel
On 28/10/2026 09:30, Qianhui Xu wrote:
> The write master of the newer VFE generations can only be programmed with
> a buffer whose payload is physically contiguous, because the frame
> increment registers describe one linear address range. Check that the DMA
> mapping of every plane is contiguous for at least sizeimage bytes and
> reject the buffer otherwise, instead of silently writing past the end of
> the first scatterlist entry.
>
> Also let the SoC code add its own alignment requirements to a queued
> buffer through a new prepare_buffer() video operation, which runs after
> the generic checks.
>
> Signed-off-by: Qianhui Xu<xiaqinghuan@mail.ustc.edu.cn>
> ---
> .../media/platform/qcom/camss/camss-video.c | 18 +++++++++++++++++-
> .../media/platform/qcom/camss/camss-video.h | 1 +
> 2 files changed, 18 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/media/platform/qcom/camss/camss-video.c b/drivers/media/platform/qcom/camss/camss-video.c
> index 0852eb6f1..027cf024f 100644
> --- a/drivers/media/platform/qcom/camss/camss-video.c
> +++ b/drivers/media/platform/qcom/camss/camss-video.c
> @@ -155,7 +155,10 @@ static int video_buf_init(struct vb2_buffer *vb)
> const struct v4l2_pix_format_mplane *format =
> &video->active_fmt.fmt.pix_mp;
> struct sg_table *sgt;
> - unsigned int i;
> + struct scatterlist *sg;
> + dma_addr_t end;
> + unsigned int i, j;
> + size_t contiguous;
>
> for (i = 0; i < format->num_planes; i++) {
> sgt = vb2_dma_sg_plane_desc(vb, i);
> @@ -163,6 +166,16 @@ static int video_buf_init(struct vb2_buffer *vb)
> return -EFAULT;
>
> buffer->addr[i] = sg_dma_address(sgt->sgl);
> + end = buffer->addr[i];
> + contiguous = 0;
> + for_each_sgtable_dma_sg(sgt, sg, j) {
> + if (sg_dma_address(sg) != end)
> + break;
> + contiguous += sg_dma_len(sg);
> + end += sg_dma_len(sg);
> + }
> + if (contiguous < format->plane_fmt[i].sizeimage)
> + return -EINVAL;
> }
Is it really the case we can only do physically contiguous on sm8750 ?
Hrmm, first I've heard of this, it would be a gigantic step backwards too.
Can you cite some sources to prove this out ?
---
bod
^ permalink raw reply [flat|nested] 18+ messages in thread
* [PATCH v2 7/9] media: camss: video: stop the subdevices already started when a start fails
2026-10-28 9:29 [PATCH v2 0/9] media: camss: add SM8750 support Qianhui Xu
` (5 preceding siblings ...)
2026-10-28 9:30 ` [PATCH v2 6/9] media: camss: video: check that a buffer is DMA contiguous and add a prepare hook Qianhui Xu
@ 2026-10-28 9:30 ` Qianhui Xu
2026-10-28 9:30 ` [PATCH v2 8/9] media: camss: vfe: add the gen4 block and SM8750 camera subsystem Qianhui Xu
` (4 subsequent siblings)
11 siblings, 0 replies; 18+ messages in thread
From: Qianhui Xu @ 2026-10-28 9:30 UTC (permalink / raw)
To: 'Bryan O'Donoghue', Mauro Carvalho Chehab
Cc: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Bjorn Andersson,
Konrad Dybcio, Hangxiang Ma, linux-media, linux-arm-msm,
devicetree, linux-kernel
When one subdevice fails to start, the ones already started further up the
pipeline were left streaming, and the next start would try to start them
again. Factor the teardown loop out of video_stop_streaming() into
video_stop_subdevices() and run it from the error path, stopping at the
subdevice that failed.
While at it, keep stopping the remaining subdevices when one of them fails
to stop instead of returning early: the pipeline is being torn down, so a
failure there must not leave the rest running.
Signed-off-by: Qianhui Xu <xiaqinghuan@mail.ustc.edu.cn>
---
.../media/platform/qcom/camss/camss-video.c | 60 +++++++++----------
1 file changed, 30 insertions(+), 30 deletions(-)
diff --git a/drivers/media/platform/qcom/camss/camss-video.c b/drivers/media/platform/qcom/camss/camss-video.c
index 027cf024f..ee9ffd043 100644
--- a/drivers/media/platform/qcom/camss/camss-video.c
+++ b/drivers/media/platform/qcom/camss/camss-video.c
@@ -265,11 +265,37 @@ static int video_prepare_streaming(struct vb2_queue *q)
return ret;
}
+/* Stop the started subdevices, excluding the one that failed to start. */
+static void video_stop_subdevices(struct camss_video *video,
+ struct media_entity *stop)
+{
+ struct media_entity *entity = &video->vdev.entity;
+ struct v4l2_subdev *subdev;
+ struct media_pad *pad;
+ int ret;
+
+ while (entity != stop) {
+ pad = &entity->pads[0];
+ if (!(pad->flags & MEDIA_PAD_FL_SINK))
+ break;
+ pad = media_pad_remote_pad_first(pad);
+ if (!pad || !is_media_entity_v4l2_subdev(pad->entity))
+ break;
+ entity = pad->entity;
+ if (entity == stop)
+ break;
+ subdev = media_entity_to_v4l2_subdev(entity);
+ ret = v4l2_subdev_call(subdev, video, s_stream, 0);
+ if (ret && ret != -ENOIOCTLCMD)
+ dev_err(video->camss->dev, "Video pipeline stop failed: %d\n", ret);
+ }
+}
+
static int video_start_streaming(struct vb2_queue *q, unsigned int count)
{
struct camss_video *video = vb2_get_drv_priv(q);
struct video_device *vdev = &video->vdev;
- struct media_entity *entity;
+ struct media_entity *entity = &vdev->entity;
struct media_pad *pad;
struct v4l2_subdev *subdev;
int ret;
@@ -284,7 +310,6 @@ static int video_start_streaming(struct vb2_queue *q, unsigned int count)
if (ret < 0)
goto error;
- entity = &vdev->entity;
while (1) {
pad = &entity->pads[0];
if (!(pad->flags & MEDIA_PAD_FL_SINK))
@@ -305,6 +330,7 @@ static int video_start_streaming(struct vb2_queue *q, unsigned int count)
return 0;
error:
+ video_stop_subdevices(video, entity);
video_device_pipeline_stop(vdev);
flush_buffers:
@@ -316,35 +342,9 @@ static int video_start_streaming(struct vb2_queue *q, unsigned int count)
static void video_stop_streaming(struct vb2_queue *q)
{
struct camss_video *video = vb2_get_drv_priv(q);
- struct video_device *vdev = &video->vdev;
- struct media_entity *entity;
- struct media_pad *pad;
- struct v4l2_subdev *subdev;
- int ret;
-
- entity = &vdev->entity;
- while (1) {
- pad = &entity->pads[0];
- if (!(pad->flags & MEDIA_PAD_FL_SINK))
- break;
-
- pad = media_pad_remote_pad_first(pad);
- if (!pad || !is_media_entity_v4l2_subdev(pad->entity))
- break;
-
- entity = pad->entity;
- subdev = media_entity_to_v4l2_subdev(entity);
-
- ret = v4l2_subdev_call(subdev, video, s_stream, 0);
-
- if (ret) {
- dev_err(video->camss->dev, "Video pipeline stop failed: %d\n", ret);
- return;
- }
- }
-
- video_device_pipeline_stop(vdev);
+ video_stop_subdevices(video, NULL);
+ video_device_pipeline_stop(&video->vdev);
video->ops->flush_buffers(video, VB2_BUF_STATE_ERROR);
}
^ permalink raw reply [flat|nested] 18+ messages in thread* [PATCH v2 8/9] media: camss: vfe: add the gen4 block and SM8750 camera subsystem
2026-10-28 9:29 [PATCH v2 0/9] media: camss: add SM8750 support Qianhui Xu
` (6 preceding siblings ...)
2026-10-28 9:30 ` [PATCH v2 7/9] media: camss: video: stop the subdevices already started when a start fails Qianhui Xu
@ 2026-10-28 9:30 ` Qianhui Xu
2026-10-28 9:30 ` [PATCH v2 9/9] arm64: dts: qcom: sm8750: add the " Qianhui Xu
` (3 subsequent siblings)
11 siblings, 0 replies; 18+ messages in thread
From: Qianhui Xu @ 2026-10-28 9:30 UTC (permalink / raw)
To: 'Bryan O'Donoghue', Mauro Carvalho Chehab
Cc: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Bjorn Andersson,
Konrad Dybcio, Hangxiang Ma, linux-media, linux-arm-msm,
devicetree, linux-kernel
The VFE on SM8750 (gen4) keeps the write master interface, but the
registers move to a new base and the frame based interrupts are gone:
buffer done, register update completion and start of frame all come from
the CSID (see the 980 CSID support). Implement the block with the
existing vfe_buf_done()/vfe_frame_start() helpers, and require the DMA
address and the frame size to be 256-byte aligned, as the write master
takes both in 256-byte units.
Instantiate the sub-blocks for SM8750: six CSIPHY instances, two full
and two lite CSIDs, two full and one lite VFE, the interconnect paths,
the top-level resources and the compatible string.
Signed-off-by: Qianhui Xu <xiaqinghuan@mail.ustc.edu.cn>
---
drivers/media/platform/qcom/camss/Makefile | 1 +
.../platform/qcom/camss/camss-vfe-gen4.c | 212 +++++++++++
drivers/media/platform/qcom/camss/camss.c | 357 ++++++++++++++++++
3 files changed, 570 insertions(+)
create mode 100644 drivers/media/platform/qcom/camss/camss-vfe-gen4.c
diff --git a/drivers/media/platform/qcom/camss/Makefile b/drivers/media/platform/qcom/camss/Makefile
index 348da1ccc..1ac787164 100644
--- a/drivers/media/platform/qcom/camss/Makefile
+++ b/drivers/media/platform/qcom/camss/Makefile
@@ -28,6 +28,7 @@ qcom-camss-objs += \
camss-vfe-680.o \
camss-vfe-gen1.o \
camss-vfe-gen3.o \
+ camss-vfe-gen4.o \
camss-vfe-vbif.o \
camss-video.o
diff --git a/drivers/media/platform/qcom/camss/camss-vfe-gen4.c b/drivers/media/platform/qcom/camss/camss-vfe-gen4.c
new file mode 100644
index 000000000..2ee82898f
--- /dev/null
+++ b/drivers/media/platform/qcom/camss/camss-vfe-gen4.c
@@ -0,0 +1,212 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * camss-vfe-gen4.c
+ *
+ * Qualcomm MSM Camera Subsystem - VFE (Video Front End) Module gen4
+ *
+ * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
+ */
+#include <linux/interrupt.h>
+#include <linux/io.h>
+
+#include "camss.h"
+#include "camss-vfe.h"
+
+#define BUS_REG_BASE (vfe_is_lite(vfe) ? 0x200 : 0x800)
+
+#define VFE_BUS_WM_CGC_OVERRIDE (BUS_REG_BASE + 0x08)
+#define WM_CGC_OVERRIDE_ALL (0x7FFFFFF)
+
+#define VFE_BUS_WM_TEST_BUS_CTRL (BUS_REG_BASE + 0x128)
+
+#define VFE_BUS_WM_CFG(n) (BUS_REG_BASE + 0x500 + (n) * 0x100)
+#define WM_CFG_EN BIT(0)
+#define WM_CFG_MODE BIT(16)
+#define VFE_BUS_WM_IMAGE_ADDR(n) (BUS_REG_BASE + 0x504 + (n) * 0x100)
+#define VFE_BUS_WM_FRAME_INCR(n) (BUS_REG_BASE + 0x508 + (n) * 0x100)
+#define VFE_BUS_WM_IMAGE_CFG_0(n) (BUS_REG_BASE + 0x50C + (n) * 0x100)
+#define WM_IMAGE_CFG_0_DEFAULT_WIDTH (0xFFFF)
+#define VFE_BUS_WM_IMAGE_CFG_2(n) (BUS_REG_BASE + 0x514 + (n) * 0x100)
+#define WM_IMAGE_CFG_2_DEFAULT_STRIDE (0xFFFF)
+#define VFE_BUS_WM_PACKER_CFG(n) (BUS_REG_BASE + 0x518 + (n) * 0x100)
+
+#define VFE_BUS_WM_IRQ_SUBSAMPLE_PERIOD(n) (BUS_REG_BASE + 0x530 + (n) * 0x100)
+#define VFE_BUS_WM_IRQ_SUBSAMPLE_PATTERN(n) (BUS_REG_BASE + 0x534 + (n) * 0x100)
+
+/* VFE lite has no such registers */
+#define VFE_BUS_WM_FRAMEDROP_PERIOD(n) (BUS_REG_BASE + 0x538 + (n) * 0x100)
+#define VFE_BUS_WM_FRAMEDROP_PATTERN(n) (BUS_REG_BASE + 0x53C + (n) * 0x100)
+
+#define VFE_BUS_WM_MMU_PREFETCH_CFG(n) (BUS_REG_BASE + 0x560 + (n) * 0x100)
+#define VFE_BUS_WM_MMU_PREFETCH_MAX_OFFSET(n) (BUS_REG_BASE + 0x564 + (n) * 0x100)
+
+/*
+ * IFE write master client IDs
+ *
+ * VIDEO_FULL 0
+ * VIDEO_DC4_Y 1
+ * VIDEO_DC4_C 2
+ * VIDEO_DC16_Y 3
+ * VIDEO_DC16_C 4
+ * DISPLAY_DS2_Y 5
+ * DISPLAY_DS2_C 6
+ * FD_Y 7
+ * FD_C 8
+ * IR_OUT 9
+ * STATS_AEC_BG 10
+ * STATS_AEC_BHIST 11
+ * STATS_TINTLESS_BG 12
+ * STATS_AWB_BG 13
+ * STATS_AWB_BFW 14
+ * STATS_AF_BHIST 15
+ * STATS_ALSC_BG 16
+ * STATS_FLICKER_BAYERRS 17
+ * STATS_TMC_BHIST 18
+ * PDAF_0 19
+ * PDAF_1 20
+ * PDAF_2 21
+ * PDAF_3 22
+ * RDI0 23
+ * RDI1 24
+ * RDI2 25
+ * RDI3 26
+ * RDI4 27
+ *
+ * IFE Lite write master client IDs
+ *
+ * RDI0 0
+ * RDI1 1
+ * RDI2 2
+ * RDI3 3
+ * GAMMA 4
+ * STATES_BE 5
+ */
+#define RDI_WM(n) ((vfe_is_lite(vfe) ? 0x0 : 0x17) + (n))
+
+static void vfe_wm_start(struct vfe_device *vfe, u8 wm, struct vfe_line *line)
+{
+ struct v4l2_pix_format_mplane *pix =
+ &line->video_out.active_fmt.fmt.pix_mp;
+
+ wm = RDI_WM(wm);
+
+ /* no clock gating at bus input */
+ writel(WM_CGC_OVERRIDE_ALL, vfe->base + VFE_BUS_WM_CGC_OVERRIDE);
+
+ writel(0x0, vfe->base + VFE_BUS_WM_TEST_BUS_CTRL);
+
+ writel(ALIGN(pix->plane_fmt[0].bytesperline, 16) * pix->height >> 8,
+ vfe->base + VFE_BUS_WM_FRAME_INCR(wm));
+ writel((WM_IMAGE_CFG_0_DEFAULT_WIDTH & 0xFFFF),
+ vfe->base + VFE_BUS_WM_IMAGE_CFG_0(wm));
+ writel(WM_IMAGE_CFG_2_DEFAULT_STRIDE,
+ vfe->base + VFE_BUS_WM_IMAGE_CFG_2(wm));
+ writel(0, vfe->base + VFE_BUS_WM_PACKER_CFG(wm));
+
+ /* no dropped frames, one irq per frame */
+ if (!vfe_is_lite(vfe)) {
+ writel(0, vfe->base + VFE_BUS_WM_FRAMEDROP_PERIOD(wm));
+ writel(1, vfe->base + VFE_BUS_WM_FRAMEDROP_PATTERN(wm));
+ }
+
+ writel(0, vfe->base + VFE_BUS_WM_IRQ_SUBSAMPLE_PERIOD(wm));
+ writel(1, vfe->base + VFE_BUS_WM_IRQ_SUBSAMPLE_PATTERN(wm));
+
+ writel(1, vfe->base + VFE_BUS_WM_MMU_PREFETCH_CFG(wm));
+ writel(0xFFFFFFFF, vfe->base + VFE_BUS_WM_MMU_PREFETCH_MAX_OFFSET(wm));
+
+ writel(WM_CFG_EN | WM_CFG_MODE, vfe->base + VFE_BUS_WM_CFG(wm));
+}
+
+static void vfe_wm_stop(struct vfe_device *vfe, u8 wm)
+{
+ wm = RDI_WM(wm);
+ writel(0, vfe->base + VFE_BUS_WM_CFG(wm));
+}
+
+static void vfe_wm_update(struct vfe_device *vfe, u8 wm, u32 addr,
+ struct vfe_line *line)
+{
+ wm = RDI_WM(wm);
+ writel(addr >> 8, vfe->base + VFE_BUS_WM_IMAGE_ADDR(wm));
+}
+
+static void vfe_reg_update(struct vfe_device *vfe, enum vfe_line_id line_id)
+{
+ int port_id = line_id;
+
+ camss_reg_update(vfe->camss, vfe->id, port_id, false);
+}
+
+static inline void vfe_reg_update_clear(struct vfe_device *vfe,
+ enum vfe_line_id line_id)
+{
+ int port_id = line_id;
+
+ camss_reg_update(vfe->camss, vfe->id, port_id, true);
+}
+
+static int vfe_prepare_buffer(struct camss_video *video, struct vb2_buffer *vb)
+{
+ struct camss_buffer *buf = container_of(to_vb2_v4l2_buffer(vb),
+ struct camss_buffer, vb);
+ struct v4l2_pix_format_mplane *pix = &video->active_fmt.fmt.pix_mp;
+
+ /* Image addresses and frame increments are expressed in 256-byte units. */
+ if (!IS_ALIGNED(buf->addr[0], 256) ||
+ !IS_ALIGNED(pix->plane_fmt[0].bytesperline * pix->height, 256))
+ return -EINVAL;
+
+ return 0;
+}
+
+static const struct camss_video_ops vfe_video_ops_gen4 = {
+ .prepare_buffer = vfe_prepare_buffer,
+ .queue_buffer = vfe_queue_buffer_v2,
+ .flush_buffers = vfe_flush_buffers,
+};
+
+static void vfe_subdev_init(struct device *dev, struct vfe_device *vfe)
+{
+ unsigned int i;
+
+ vfe->video_ops = vfe_video_ops_gen4;
+ for (i = 0; i < vfe->res->line_num; i++)
+ vfe->line[i].video_out.vb2_q.min_queued_buffers = CAMSS_INIT_BUF_COUNT;
+}
+
+static void vfe_global_reset(struct vfe_device *vfe)
+{
+ vfe_isr_reset_ack(vfe);
+}
+
+static irqreturn_t vfe_isr(int irq, void *dev)
+{
+ /* nop */
+ return IRQ_HANDLED;
+}
+
+static int vfe_halt(struct vfe_device *vfe)
+{
+ /* rely on vfe_disable_output() to stop the VFE */
+ return 0;
+}
+
+const struct vfe_hw_ops vfe_ops_gen4 = {
+ .global_reset = vfe_global_reset,
+ .hw_version = vfe_hw_version,
+ .isr = vfe_isr,
+ .pm_domain_off = vfe_pm_domain_off,
+ .pm_domain_on = vfe_pm_domain_on,
+ .reg_update = vfe_reg_update,
+ .reg_update_clear = vfe_reg_update_clear,
+ .subdev_init = vfe_subdev_init,
+ .vfe_disable = vfe_disable,
+ .vfe_enable = vfe_enable_v2,
+ .vfe_halt = vfe_halt,
+ .vfe_wm_start = vfe_wm_start,
+ .vfe_wm_stop = vfe_wm_stop,
+ .vfe_buf_done = vfe_buf_done,
+ .frame_start = vfe_frame_start,
+ .vfe_wm_update = vfe_wm_update,
+};
diff --git a/drivers/media/platform/qcom/camss/camss.c b/drivers/media/platform/qcom/camss/camss.c
index 92d536986..b70fbff0f 100644
--- a/drivers/media/platform/qcom/camss/camss.c
+++ b/drivers/media/platform/qcom/camss/camss.c
@@ -4187,6 +4187,349 @@ static const struct resources_icc icc_res_sa8775p[] = {
},
};
+static const struct camss_subdev_resources csiphy_res_8750[] = {
+ /* CSIPHY0 */
+ {
+ .regulators = {
+ { .supply = "vdd-csiphy0-0p9", .init_load_uA = 148000 },
+ { .supply = "vdd-csiphy0-1p2", .init_load_uA = 14660 }
+ },
+ .clock = { "csiphy0", "csiphy0_timer",
+ "cpas_ahb", "cpas_fast_ahb" },
+ .clock_rate = { { 400000000, 480000000 },
+ { 400000000 },
+ { 0 },
+ { 0 } },
+ .reg = { "csiphy0" },
+ .interrupt = { "csiphy0" },
+ .csiphy = {
+ .id = 0,
+ .hw_ops = &csiphy_ops_3ph_1_0,
+ .formats = &csiphy_formats_sdm845
+ }
+ },
+ /* CSIPHY1 */
+ {
+ .regulators = {
+ { .supply = "vdd-csiphy1-0p9", .init_load_uA = 148000 },
+ { .supply = "vdd-csiphy1-1p2", .init_load_uA = 14660 }
+ },
+ .clock = { "csiphy1", "csiphy1_timer",
+ "cpas_ahb", "cpas_fast_ahb" },
+ .clock_rate = { { 400000000, 480000000 },
+ { 400000000 },
+ { 0 },
+ { 0 } },
+ .reg = { "csiphy1" },
+ .interrupt = { "csiphy1" },
+ .csiphy = {
+ .id = 1,
+ .hw_ops = &csiphy_ops_3ph_1_0,
+ .formats = &csiphy_formats_sdm845
+ }
+ },
+ /* CSIPHY2 */
+ {
+ .regulators = {
+ { .supply = "vdd-csiphy2-0p9", .init_load_uA = 148000 },
+ { .supply = "vdd-csiphy2-1p2", .init_load_uA = 14660 }
+ },
+ .clock = { "csiphy2", "csiphy2_timer",
+ "cpas_ahb", "cpas_fast_ahb" },
+ .clock_rate = { { 400000000, 480000000 },
+ { 400000000 },
+ { 0 },
+ { 0 } },
+ .reg = { "csiphy2" },
+ .interrupt = { "csiphy2" },
+ .csiphy = {
+ .id = 2,
+ .hw_ops = &csiphy_ops_3ph_1_0,
+ .formats = &csiphy_formats_sdm845
+ }
+ },
+ /* CSIPHY3 */
+ {
+ .regulators = {
+ { .supply = "vdd-csiphy3-0p9", .init_load_uA = 148000 },
+ { .supply = "vdd-csiphy3-1p2", .init_load_uA = 14660 }
+ },
+ .clock = { "csiphy3", "csiphy3_timer",
+ "cpas_ahb", "cpas_fast_ahb" },
+ .clock_rate = { { 400000000, 480000000 },
+ { 400000000 },
+ { 0 },
+ { 0 } },
+ .reg = { "csiphy3" },
+ .interrupt = { "csiphy3" },
+ .csiphy = {
+ .id = 3,
+ .hw_ops = &csiphy_ops_3ph_1_0,
+ .formats = &csiphy_formats_sdm845
+ }
+ },
+ /* CSIPHY4 */
+ {
+ .regulators = {
+ { .supply = "vdd-csiphy4-0p9", .init_load_uA = 148000 },
+ { .supply = "vdd-csiphy4-1p2", .init_load_uA = 14660 }
+ },
+ .clock = { "csiphy4", "csiphy4_timer",
+ "cpas_ahb", "cpas_fast_ahb" },
+ .clock_rate = { { 400000000, 480000000 },
+ { 400000000 },
+ { 0 },
+ { 0 } },
+ .reg = { "csiphy4" },
+ .interrupt = { "csiphy4" },
+ .csiphy = {
+ .id = 4,
+ .hw_ops = &csiphy_ops_3ph_1_0,
+ .formats = &csiphy_formats_sdm845
+ }
+ },
+ /* CSIPHY5 */
+ {
+ .regulators = {
+ { .supply = "vdd-csiphy5-0p9", .init_load_uA = 148000 },
+ { .supply = "vdd-csiphy5-1p2", .init_load_uA = 14660 }
+ },
+ .clock = { "csiphy5", "csiphy5_timer",
+ "cpas_ahb", "cpas_fast_ahb" },
+ .clock_rate = { { 400000000, 480000000 },
+ { 400000000 },
+ { 0 },
+ { 0 } },
+ .reg = { "csiphy5" },
+ .interrupt = { "csiphy5" },
+ .csiphy = {
+ .id = 5,
+ .hw_ops = &csiphy_ops_3ph_1_0,
+ .formats = &csiphy_formats_sdm845
+ }
+ },
+};
+
+static const struct camss_subdev_resources csid_res_8750[] = {
+ /* CSID0 */
+ {
+ .clock = { "csid", "csid_csiphy_rx" },
+ .clock_rate = { { 400000000, 480000000 },
+ { 400000000, 480000000 } },
+ .reg = { "csid0" },
+ .interrupt = { "csid0" },
+ .csid = {
+ .is_lite = false,
+ .parent_dev_ops = &vfe_parent_dev_ops,
+ .hw_ops = &csid_ops_980,
+ .formats = &csid_formats_gen2
+ }
+ },
+ /* CSID1 */
+ {
+ .clock = { "csid", "csid_csiphy_rx" },
+ .clock_rate = { { 400000000, 480000000 },
+ { 400000000, 480000000 } },
+ .reg = { "csid1" },
+ .interrupt = { "csid1" },
+ .csid = {
+ .is_lite = false,
+ .parent_dev_ops = &vfe_parent_dev_ops,
+ .hw_ops = &csid_ops_980,
+ .formats = &csid_formats_gen2
+ }
+ },
+ /* CSID2 */
+ {
+ .clock = { "csid", "csid_csiphy_rx" },
+ .clock_rate = { { 400000000, 480000000 },
+ { 400000000, 480000000 } },
+ .reg = { "csid2" },
+ .interrupt = { "csid2" },
+ .csid = {
+ .is_lite = false,
+ .parent_dev_ops = &vfe_parent_dev_ops,
+ .hw_ops = &csid_ops_980,
+ .formats = &csid_formats_gen2
+ }
+ },
+ /* CSID_LITE0 */
+ {
+ .clock = { "vfe_lite_csid", "vfe_lite_cphy_rx" },
+ .clock_rate = { { 400000000, 480000000 },
+ { 400000000, 480000000 } },
+ .reg = { "csid_lite0" },
+ .interrupt = { "csid_lite0" },
+ .csid = {
+ .is_lite = true,
+ .parent_dev_ops = &vfe_parent_dev_ops,
+ .hw_ops = &csid_ops_980,
+ .formats = &csid_formats_gen2
+ }
+ },
+ /* CSID_LITE1 */
+ {
+ .clock = { "vfe_lite_csid", "vfe_lite_cphy_rx" },
+ .clock_rate = { { 400000000, 480000000 },
+ { 400000000, 480000000 } },
+ .reg = { "csid_lite1" },
+ .interrupt = { "csid_lite1" },
+ .csid = {
+ .is_lite = true,
+ .parent_dev_ops = &vfe_parent_dev_ops,
+ .hw_ops = &csid_ops_980,
+ .formats = &csid_formats_gen2
+ }
+ }
+};
+
+static const struct camss_subdev_resources vfe_res_8750[] = {
+ /* VFE0 - TFE Full */
+ {
+ .clock = { "gcc_axi_hf", "vfe0_fast_ahb", "vfe0",
+ "cpas_vfe0", "cpas_vfe1", "cpas_vfe2",
+ "camnoc_rt_axi", "camnoc_nrt_axi", "qdss_debug_xo" },
+ .clock_rate = { { 0 },
+ { 0 },
+ { 360280000, 480000000, 630000000, 716000000,
+ 833000000 },
+ { 0 },
+ { 0 },
+ { 0 },
+ { 200000000, 300000000, 400000000, 480000000 },
+ { 0 },
+ { 0 } },
+ .reg = { "vfe0" },
+ .interrupt = { "vfe0" },
+ .vfe = {
+ .line_num = 3,
+ .is_lite = false,
+ .reg_update_after_csid_config = true,
+ .has_pd = true,
+ .pd_name = "ife0",
+ .hw_ops = &vfe_ops_gen4,
+ .formats_rdi = &vfe_formats_rdi_845,
+ .formats_pix = &vfe_formats_pix_845
+ }
+ },
+ /* VFE1 - TFE Full */
+ {
+ .clock = { "gcc_axi_hf", "vfe1_fast_ahb", "vfe1",
+ "cpas_vfe0", "cpas_vfe1", "cpas_vfe2",
+ "camnoc_rt_axi", "camnoc_nrt_axi", "qdss_debug_xo" },
+ .clock_rate = { { 0 },
+ { 0 },
+ { 360280000, 480000000, 630000000, 716000000,
+ 833000000 },
+ { 0 },
+ { 0 },
+ { 0 },
+ { 200000000, 300000000, 400000000, 480000000 },
+ { 0 },
+ { 0 } },
+ .reg = { "vfe1" },
+ .interrupt = { "vfe1" },
+ .vfe = {
+ .line_num = 3,
+ .is_lite = false,
+ .reg_update_after_csid_config = true,
+ .has_pd = true,
+ .pd_name = "ife1",
+ .hw_ops = &vfe_ops_gen4,
+ .formats_rdi = &vfe_formats_rdi_845,
+ .formats_pix = &vfe_formats_pix_845
+ }
+ },
+ /* VFE2 - TFE Full */
+ {
+ .clock = { "gcc_axi_hf", "vfe2_fast_ahb", "vfe2",
+ "cpas_vfe0", "cpas_vfe1", "cpas_vfe2",
+ "camnoc_rt_axi", "camnoc_nrt_axi", "qdss_debug_xo" },
+ .clock_rate = { { 0 },
+ { 0 },
+ { 360280000, 480000000, 630000000, 716000000,
+ 833000000 },
+ { 0 },
+ { 0 },
+ { 0 },
+ { 200000000, 300000000, 400000000, 480000000 },
+ { 0 },
+ { 0 } },
+ .reg = { "vfe2" },
+ .interrupt = { "vfe2" },
+ .vfe = {
+ .line_num = 3,
+ .is_lite = false,
+ .reg_update_after_csid_config = true,
+ .has_pd = true,
+ .pd_name = "ife2",
+ .hw_ops = &vfe_ops_gen4,
+ .formats_rdi = &vfe_formats_rdi_845,
+ .formats_pix = &vfe_formats_pix_845
+ }
+ },
+ /* VFE_LITE0 */
+ {
+ .clock = { "gcc_axi_hf", "vfe_lite_ahb", "vfe_lite",
+ "cpas_vfe_lite", "camnoc_rt_axi",
+ "camnoc_nrt_axi", "qdss_debug_xo" },
+ .clock_rate = { { 0 },
+ { 0 },
+ { 266666667, 400000000, 480000000 },
+ { 0 },
+ { 200000000, 300000000, 400000000, 480000000 },
+ { 0 },
+ { 0 } },
+ .reg = { "vfe_lite0" },
+ .interrupt = { "vfe_lite0" },
+ .vfe = {
+ .line_num = 4,
+ .is_lite = true,
+ .reg_update_after_csid_config = true,
+ .hw_ops = &vfe_ops_gen4,
+ .formats_rdi = &vfe_formats_rdi_845,
+ .formats_pix = &vfe_formats_pix_845
+ }
+ },
+ /* VFE_LITE1 */
+ {
+ .clock = { "gcc_axi_hf", "vfe_lite_ahb", "vfe_lite",
+ "cpas_vfe_lite", "camnoc_rt_axi",
+ "camnoc_nrt_axi", "qdss_debug_xo" },
+ .clock_rate = { { 0 },
+ { 0 },
+ { 266666667, 400000000, 480000000 },
+ { 0 },
+ { 200000000, 300000000, 400000000, 480000000 },
+ { 0 },
+ { 0 } },
+ .reg = { "vfe_lite1" },
+ .interrupt = { "vfe_lite1" },
+ .vfe = {
+ .line_num = 4,
+ .is_lite = true,
+ .reg_update_after_csid_config = true,
+ .hw_ops = &vfe_ops_gen4,
+ .formats_rdi = &vfe_formats_rdi_845,
+ .formats_pix = &vfe_formats_pix_845
+ }
+ }
+};
+
+static const struct resources_icc icc_res_sm8750[] = {
+ {
+ .name = "ahb",
+ .icc_bw_tbl.avg = 150000,
+ .icc_bw_tbl.peak = 300000,
+ },
+ /* Based on 4096 x 3072 30 FPS 2496 Mbps mode */
+ {
+ .name = "hf_mnoc",
+ .icc_bw_tbl.avg = 471860,
+ .icc_bw_tbl.peak = 925857,
+ },
+};
+
static const struct camss_subdev_resources csiphy_res_x1e80100[] = {
/* CSIPHY0 */
{
@@ -5735,6 +6078,19 @@ static const struct camss_resources sm8650_resources = {
.vfe_num = ARRAY_SIZE(vfe_res_sm8650),
};
+static const struct camss_resources sm8750_resources = {
+ .version = CAMSS_8750,
+ .pd_name = "top",
+ .csiphy_res = csiphy_res_8750,
+ .csid_res = csid_res_8750,
+ .vfe_res = vfe_res_8750,
+ .icc_res = icc_res_sm8750,
+ .csiphy_num = ARRAY_SIZE(csiphy_res_8750),
+ .csid_num = ARRAY_SIZE(csid_res_8750),
+ .vfe_num = ARRAY_SIZE(vfe_res_8750),
+ .icc_path_num = ARRAY_SIZE(icc_res_sm8750),
+};
+
static const struct camss_resources x1e80100_resources = {
.version = CAMSS_X1E80100,
.pd_name = "top",
@@ -5769,6 +6125,7 @@ static const struct of_device_id camss_dt_match[] = {
{ .compatible = "qcom,sm8250-camss", .data = &sm8250_resources },
{ .compatible = "qcom,sm8550-camss", .data = &sm8550_resources },
{ .compatible = "qcom,sm8650-camss", .data = &sm8650_resources },
+ { .compatible = "qcom,sm8750-camss", .data = &sm8750_resources },
{ .compatible = "qcom,x1e80100-camss", .data = &x1e80100_resources },
{ }
};
^ permalink raw reply [flat|nested] 18+ messages in thread* [PATCH v2 9/9] arm64: dts: qcom: sm8750: add the camera subsystem
2026-10-28 9:29 [PATCH v2 0/9] media: camss: add SM8750 support Qianhui Xu
` (7 preceding siblings ...)
2026-10-28 9:30 ` [PATCH v2 8/9] media: camss: vfe: add the gen4 block and SM8750 camera subsystem Qianhui Xu
@ 2026-10-28 9:30 ` Qianhui Xu
2026-10-28 10:10 ` [PATCH v2 0/9] media: camss: add SM8750 support Vladimir Zapolskiy
` (2 subsequent siblings)
11 siblings, 0 replies; 18+ messages in thread
From: Qianhui Xu @ 2026-10-28 9:30 UTC (permalink / raw)
To: 'Bryan O'Donoghue', Mauro Carvalho Chehab
Cc: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Bjorn Andersson,
Konrad Dybcio, Hangxiang Ma, linux-media, linux-arm-msm,
devicetree, linux-kernel
Describe the camera subsystem as the single platform device the camss
driver binds to: the SM8750 block has four CSID, six CSIPHY, three VFE and
two VFE lite instances, all behind one register window, one clock and one
power domain list, with one interrupt per instance.
The node is left disabled; boards enable it and describe their sensors and
CSIPHY ports on top.
Signed-off-by: Qianhui Xu <xiaqinghuan@mail.ustc.edu.cn>
---
arch/arm64/boot/dts/qcom/sm8750.dtsi | 179 +++++++++++++++++++++++++++
1 file changed, 179 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm8750.dtsi b/arch/arm64/boot/dts/qcom/sm8750.dtsi
index dd738d13d..12dcf2f33 100644
--- a/arch/arm64/boot/dts/qcom/sm8750.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8750.dtsi
@@ -3495,6 +3495,185 @@ dispcc: clock-controller@af00000 {
#power-domain-cells = <1>;
};
+ camss: isp@ad27000 {
+ compatible = "qcom,sm8750-camss";
+
+ reg = <0x0 0x0ad27000 0x0 0x2b00>,
+ <0x0 0x0ad2a000 0x0 0x2b00>,
+ <0x0 0x0ad2d000 0x0 0x2b00>,
+ <0x0 0x0ad6d000 0x0 0xa00>,
+ <0x0 0x0ad72000 0x0 0xa00>,
+ <0x0 0x0ada9000 0x0 0x2000>,
+ <0x0 0x0adab000 0x0 0x2000>,
+ <0x0 0x0adad000 0x0 0x2000>,
+ <0x0 0x0adaf000 0x0 0x2000>,
+ <0x0 0x0adb1000 0x0 0x2000>,
+ <0x0 0x0adb3000 0x0 0x2000>,
+ <0x0 0x0ad8b000 0x0 0x400>,
+ <0x0 0x0ad8c000 0x0 0x400>,
+ <0x0 0x0ad8d000 0x0 0x400>,
+ <0x0 0x0ac86000 0x0 0x10000>,
+ <0x0 0x0ac96000 0x0 0x10000>,
+ <0x0 0x0aca6000 0x0 0x10000>,
+ <0x0 0x0ad6e000 0x0 0x3000>,
+ <0x0 0x0ad73000 0x0 0x3000>;
+ reg-names = "csid0",
+ "csid1",
+ "csid2",
+ "csid_lite0",
+ "csid_lite1",
+ "csiphy0",
+ "csiphy1",
+ "csiphy2",
+ "csiphy3",
+ "csiphy4",
+ "csiphy5",
+ "csitpg0",
+ "csitpg1",
+ "csitpg2",
+ "vfe0",
+ "vfe1",
+ "vfe2",
+ "vfe_lite0",
+ "vfe_lite1";
+
+ clocks = <&camcc CAM_CC_CAMNOC_NRT_AXI_CLK>,
+ <&camcc CAM_CC_CAMNOC_RT_AXI_CLK>,
+ <&camcc CAM_CC_CAM_TOP_AHB_CLK>,
+ <&camcc CAM_CC_CAM_TOP_FAST_AHB_CLK>,
+ <&camcc CAM_CC_CAMNOC_RT_TFE_0_MAIN_CLK>,
+ <&camcc CAM_CC_CAMNOC_RT_TFE_1_MAIN_CLK>,
+ <&camcc CAM_CC_CAMNOC_RT_TFE_2_MAIN_CLK>,
+ <&camcc CAM_CC_CAMNOC_RT_IFE_LITE_CLK>,
+ <&camcc CAM_CC_CSID_CLK>,
+ <&camcc CAM_CC_CSID_CSIPHY_RX_CLK>,
+ <&camcc CAM_CC_CSIPHY0_CLK>,
+ <&camcc CAM_CC_CSI0PHYTIMER_CLK>,
+ <&camcc CAM_CC_CSIPHY1_CLK>,
+ <&camcc CAM_CC_CSI1PHYTIMER_CLK>,
+ <&camcc CAM_CC_CSIPHY2_CLK>,
+ <&camcc CAM_CC_CSI2PHYTIMER_CLK>,
+ <&camcc CAM_CC_CSIPHY3_CLK>,
+ <&camcc CAM_CC_CSI3PHYTIMER_CLK>,
+ <&camcc CAM_CC_CSIPHY4_CLK>,
+ <&camcc CAM_CC_CSI4PHYTIMER_CLK>,
+ <&camcc CAM_CC_CSIPHY5_CLK>,
+ <&camcc CAM_CC_CSI5PHYTIMER_CLK>,
+ <&gcc GCC_CAMERA_HF_AXI_CLK>,
+ <&gcc GCC_CAMERA_SF_AXI_CLK>,
+ <&camcc CAM_CC_TFE_0_MAIN_CLK>,
+ <&camcc CAM_CC_TFE_0_MAIN_FAST_AHB_CLK>,
+ <&camcc CAM_CC_TFE_1_MAIN_CLK>,
+ <&camcc CAM_CC_TFE_1_MAIN_FAST_AHB_CLK>,
+ <&camcc CAM_CC_TFE_2_MAIN_CLK>,
+ <&camcc CAM_CC_TFE_2_MAIN_FAST_AHB_CLK>,
+ <&camcc CAM_CC_IFE_LITE_CLK>,
+ <&camcc CAM_CC_IFE_LITE_AHB_CLK>,
+ <&camcc CAM_CC_IFE_LITE_CPHY_RX_CLK>,
+ <&camcc CAM_CC_IFE_LITE_CSID_CLK>,
+ <&camcc CAM_CC_QDSS_DEBUG_XO_CLK>;
+ clock-names = "camnoc_nrt_axi",
+ "camnoc_rt_axi",
+ "cpas_ahb",
+ "cpas_fast_ahb",
+ "cpas_vfe0",
+ "cpas_vfe1",
+ "cpas_vfe2",
+ "cpas_vfe_lite",
+ "csid",
+ "csid_csiphy_rx",
+ "csiphy0",
+ "csiphy0_timer",
+ "csiphy1",
+ "csiphy1_timer",
+ "csiphy2",
+ "csiphy2_timer",
+ "csiphy3",
+ "csiphy3_timer",
+ "csiphy4",
+ "csiphy4_timer",
+ "csiphy5",
+ "csiphy5_timer",
+ "gcc_axi_hf",
+ "gcc_axi_sf",
+ "vfe0",
+ "vfe0_fast_ahb",
+ "vfe1",
+ "vfe1_fast_ahb",
+ "vfe2",
+ "vfe2_fast_ahb",
+ "vfe_lite",
+ "vfe_lite_ahb",
+ "vfe_lite_cphy_rx",
+ "vfe_lite_csid",
+ "qdss_debug_xo";
+
+ interrupts = <GIC_SPI 601 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 603 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 431 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 605 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 376 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 477 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 478 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 479 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 448 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 122 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 89 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 433 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 436 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 457 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 606 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 377 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "csid0",
+ "csid1",
+ "csid2",
+ "csid_lite0",
+ "csid_lite1",
+ "csiphy0",
+ "csiphy1",
+ "csiphy2",
+ "csiphy3",
+ "csiphy4",
+ "csiphy5",
+ "vfe0",
+ "vfe1",
+ "vfe2",
+ "vfe_lite0",
+ "vfe_lite1";
+
+ interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+ &config_noc SLAVE_CAMERA_CFG QCOM_ICC_TAG_ACTIVE_ONLY>,
+ <&mmss_noc MASTER_CAMNOC_HF QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+ <&mmss_noc MASTER_CAMNOC_SF QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+ <&mmss_noc MASTER_CAMNOC_NRT_ICP_SF QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "ahb",
+ "hf_mnoc",
+ "sf_mnoc",
+ "sf_icp_mnoc";
+
+ iommus = <&apps_smmu 0x1c00 0x00>;
+
+ power-domains = <&camcc CAM_CC_TFE_0_GDSC>,
+ <&camcc CAM_CC_TFE_1_GDSC>,
+ <&camcc CAM_CC_TFE_2_GDSC>,
+ <&camcc CAM_CC_TITAN_TOP_GDSC>;
+ power-domain-names = "ife0",
+ "ife1",
+ "ife2",
+ "top";
+
+ dma-coherent;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
camcc: clock-controller@ade0000 {
compatible = "qcom,sm8750-camcc";
reg = <0x0 0xade0000 0x0 0x20000>;
^ permalink raw reply [flat|nested] 18+ messages in thread* Re: [PATCH v2 0/9] media: camss: add SM8750 support
2026-10-28 9:29 [PATCH v2 0/9] media: camss: add SM8750 support Qianhui Xu
` (8 preceding siblings ...)
2026-10-28 9:30 ` [PATCH v2 9/9] arm64: dts: qcom: sm8750: add the " Qianhui Xu
@ 2026-10-28 10:10 ` Vladimir Zapolskiy
2026-10-28 12:09 ` Qianhui Xu
2026-10-28 10:42 ` Hangxiang Ma
2026-10-28 12:17 ` Bryan O'Donoghue
11 siblings, 1 reply; 18+ messages in thread
From: Vladimir Zapolskiy @ 2026-10-28 10:10 UTC (permalink / raw)
To: Qianhui Xu
Cc: 'Bryan O'Donoghue',
Mauro Carvalho Chehab, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, Bjorn Andersson, Konrad Dybcio, Hangxiang Ma,
linux-media, linux-arm-msm, devicetree, linux-kernel
Hello Qianhui.
On 10/28/26 11:29, Qianhui Xu wrote:
> This series adds camera capture support for the Qualcomm SM8750 SoC
> (camera subsystem block with three full and two lite CSIDs, six CSIPHY,
for CSIPHYs you shall use the new MIPI CSI2 PHY driver unavoidably, see
drivers/phy/qualcomm/phy-qcom-mipi-csi2-core.c, as a reference see the
recently published SM8450 CAMSS support:
https://lore.kernel.org/linux-arm-msm/20261026224957.1115370-1-vz@kernel.org
> three full and two lite VFEs and three CSITPGs). It was developed on a
> Lenovo TB322FC (Y700 Gen4 tablet) and both of its sensors (rear s5kjns,
> front gc08a8) capture at full resolution and 30 fps with it, through
> libcamera.
>
> The block is close to the SM8650 one, but the capture interrupts move from
> the VFE to the CSID: the VFE of this generation has no useful interrupt
> sources, and the CSID reports RDI buffer done, register update completion
> and CAMIF start-of-frame per CSI2 stream. That drives the two structural
> changes in the series:
>
--
Best wishes,
Vladimir
^ permalink raw reply [flat|nested] 18+ messages in thread* Re: [PATCH v2 0/9] media: camss: add SM8750 support
2026-10-28 10:10 ` [PATCH v2 0/9] media: camss: add SM8750 support Vladimir Zapolskiy
@ 2026-10-28 12:09 ` Qianhui Xu
0 siblings, 0 replies; 18+ messages in thread
From: Qianhui Xu @ 2026-10-28 12:09 UTC (permalink / raw)
To: Vladimir Zapolskiy
Cc: Bryan O'Donoghue, Mauro Carvalho Chehab, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Bjorn Andersson,
Konrad Dybcio, Hangxiang Ma, linux-media, linux-arm-msm,
devicetree, linux-kernel
Hello Vladimir,
understood, and accepted - the CSIPHY must not grow another per-SoC register
table inside camss. Our 2/9 does exactly that (a 103-entry lane table added to
camss-csiphy-3ph-1-0.c for the 2.4.0 two-phase PHY), so that patch is the one
that has to go, not be reworked in place.
What I am going to do before proposing a shape:
- read the SM8450 series (20261026224957.1115370-1-vz@kernel.org) as the
reference, in particular "media: qcom: camss: Allow CSI2 PHY devices
without CSIPHY resources" - that is the part that defines how camss is
expected to consume a generic PHY instead of owning the CSIPHY;
- read phy-qcom-mipi-csi2-core.c and phy-qcom-mipi-csi2.h in tree, and the
Kaanapali v22 phy patches, to see where the 2.4.0 two-phase register map
and the common-status offset are supposed to live;
- then restate the SM8750 support with the CSIPHY as a qcom,x1e80100-csi2-phy
style PHY device, camss referencing it through phys/phy-names, and the
binding describing the PHY nodes rather than CSIPHY registers.
Two things I want to be honest about up front:
- our binding currently has no phys/phy-names at all; it lists the CSIPHY
register windows and clocks as camss resources. That is the part that has
to be rewritten, together with the DTS.
- the 2.4.0 PHY data we have is from the vendor camera.ko and covers both a
two-phase and a three-phase variant of the same block. Moving it into the
PHY driver means deciding which variant the SoC actually wires, which is
the kind of thing that belongs in the PHY driver's per-SoC data, not in
camss. I would like to get that right rather than port the table as-is.
Separately: Hangxiang asked us to hold the SM8750 series until the Kaanapali
work is rebased, and I have agreed to that. So this will not appear as a v3
soon; when it does, the CSIPHY rework will be part of it from the start rather
than a follow-up.
Thanks for the review - it saved us from pushing the wrong shape twice.
Best regards,
Qianhui
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [PATCH v2 0/9] media: camss: add SM8750 support
2026-10-28 9:29 [PATCH v2 0/9] media: camss: add SM8750 support Qianhui Xu
` (9 preceding siblings ...)
2026-10-28 10:10 ` [PATCH v2 0/9] media: camss: add SM8750 support Vladimir Zapolskiy
@ 2026-10-28 10:42 ` Hangxiang Ma
2026-10-28 12:09 ` Qianhui Xu
2026-10-28 12:17 ` Bryan O'Donoghue
11 siblings, 1 reply; 18+ messages in thread
From: Hangxiang Ma @ 2026-10-28 10:42 UTC (permalink / raw)
To: Qianhui Xu, 'Bryan O'Donoghue', Mauro Carvalho Chehab
Cc: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Bjorn Andersson,
Konrad Dybcio, linux-media, linux-arm-msm, devicetree,
linux-kernel
On 10/28/2026 5:29 PM, Qianhui Xu wrote:
> This series adds camera capture support for the Qualcomm SM8750 SoC
> (camera subsystem block with three full and two lite CSIDs, six CSIPHY,
> three full and two lite VFEs and three CSITPGs). It was developed on a
> Lenovo TB322FC (Y700 Gen4 tablet) and both of its sensors (rear s5kjns,
> front gc08a8) capture at full resolution and 30 fps with it, through
> libcamera.
>
Thanks for your interest in this work. It looks like this series is
based on my SM8750 series.
https://lore.kernel.org/all/20260721-add-support-for-camss-on-sm8750-v6-0-a5f841061d18@oss.qualcomm.com/
However, the original authorship and Signed-off-by appear to have been
dropped. When reusing someone else's patches, please keep the original
author and Signed-off-by, and add your own below it with a note on
what you changed (see Documentation/process/submitting-patches.rst).
Also, the follow-up work on top of the SM8750 series is already in
progress within our team, and it will be rebased on the Kaanapali
series once that is merged.
https://lore.kernel.org/all/20261024-kaanapali-camss-v22-0-7da3ea49c8a1@oss.qualcomm.com/
To avoid duplicated effort and split reviews, could you please hold
off on posting this series? If you have improvements in mind, I'd be
happy to discuss them on the original thread and include them with
proper credit. You can also split the CAMSS framework part out as a
standalone series so that it will not influence the sm8750 CAMSS series.
---
Best Regards,
Hangxiang
^ permalink raw reply [flat|nested] 18+ messages in thread* Re: [PATCH v2 0/9] media: camss: add SM8750 support
2026-10-28 10:42 ` Hangxiang Ma
@ 2026-10-28 12:09 ` Qianhui Xu
0 siblings, 0 replies; 18+ messages in thread
From: Qianhui Xu @ 2026-10-28 12:09 UTC (permalink / raw)
To: Hangxiang Ma, Bryan O'Donoghue, Mauro Carvalho Chehab
Cc: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Bjorn Andersson,
Konrad Dybcio, linux-media, linux-arm-msm, devicetree,
linux-kernel
Hello Hangxiang,
thank you for the pointer, and sorry about the attribution. You are right on
the substance, so let me be precise about what happened rather than vague.
I went through all nine patches of v2 and compared them line by line against
your SM8750 v6 series and against your Kaanapali v22 series. Three of them
carry your code:
- 1/9 qcom,sm8750-camss.yaml - 76% of the added lines are from your v6 2/7.
- 4/9 camss-csid-980.c - 92% of the file is your v6 5/7, 20 hunks changed.
- 8/9 camss-vfe-gen4.c - 84% of the file is your v22 9/14
(camss-vfe-1080.c), retargeted to the 980 bus
base, plus the SM8750 csiphy/csid/vfe tables.
The other six are our own work: the CSIPHY 2.4.0 lane table comes from
disassembly of the vendor camera.ko, and the csid error-path unwind, the CSID
frame-start reporting, the two camss-video fixes and the sm8750 DTS are new
code. I am not claiming anything there was derived from yours.
For v3 the trailers will be, for those three patches:
From: Hangxiang Ma <hangxiang.ma@oss.qualcomm.com>
Co-developed-by: Qianhui Xu <xiaqinghuan@mail.ustc.edu.cn>
Signed-off-by: Hangxiang Ma <hangxiang.ma@oss.qualcomm.com>
Signed-off-by: Qianhui Xu <xiaqinghuan@mail.ustc.edu.cn>
with Atiya's Co-developed-by/Signed-off-by kept in the csid-980 one, since it
is already in your v6 5/7, and a short note under the --- line naming the
series it is based on and listing what we changed. 8/9 will point at the
Kaanapali v22 series, not at the SM8750 one - that was the part of my earlier
description that was simply wrong.
On posting: I will hold the SM8750 series. Nothing further will be sent until
your team has rebased onto Kaanapali, and when we do send it will be rebased on
top of your trees with the trailers above.
On splitting: I would rather not split the SM8750 generation support out,
because the binding, the CSID 980, the VFE gen4 and the DTS only make sense
together and would be reviewed twice. What can be separated cleanly are three
patches that do not touch your code at all and are not SM8750 specific:
- media: camss: csid: unwind the power-on path through a single error label
- media: camss: video: check that a buffer is DMA contiguous
- media: camss: video: stop the subdevices already started when a start fails
Those are pure camss framework cleanups against the pristine tree. If you would
rather not see them before your rebase, say so and I will keep them back too -
otherwise I would send them as a small standalone series so they do not sit
behind the SM8750 work. No dates from me on either; I would rather wait than
add review load at the wrong moment.
One thing worth flagging separately: Vladimir has asked for the CSIPHY to move
to drivers/phy/qualcomm/phy-qcom-mipi-csi2-core.c, following the SM8450 series.
That affects 2/9 only and is independent of your series, but it means the
CSIPHY part will change shape before any repost.
Thanks for the review and for the patience.
Best regards,
Qianhui
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [PATCH v2 0/9] media: camss: add SM8750 support
2026-10-28 9:29 [PATCH v2 0/9] media: camss: add SM8750 support Qianhui Xu
` (10 preceding siblings ...)
2026-10-28 10:42 ` Hangxiang Ma
@ 2026-10-28 12:17 ` Bryan O'Donoghue
11 siblings, 0 replies; 18+ messages in thread
From: Bryan O'Donoghue @ 2026-10-28 12:17 UTC (permalink / raw)
To: Qianhui Xu, 'Bryan O'Donoghue', Mauro Carvalho Chehab
Cc: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Bjorn Andersson,
Konrad Dybcio, Hangxiang Ma, linux-media, linux-arm-msm,
devicetree, linux-kernel
On 28/10/2026 09:29, Qianhui Xu wrote:
> This series adds camera capture support for the Qualcomm SM8750 SoC
> (camera subsystem block with three full and two lite CSIDs, six CSIPHY,
> three full and two lite VFEs and three CSITPGs). It was developed on a
> Lenovo TB322FC (Y700 Gen4 tablet) and both of its sensors (rear s5kjns,
> front gc08a8) capture at full resolution and 30 fps with it, through
> libcamera.
8750 is on-list for a while.
https://lore.kernel.org/all/20251126-add-support-for-camss-on-sm8750-v1-0-646fee2eb720@oss.qualcomm.com
Could you have a try of that and then any additional changes you propose
base on top ?
---
bod
^ permalink raw reply [flat|nested] 18+ messages in thread