Re: [PATCH v2 0/4] ASoC: qcom: display port changes

[Srinivas Kandagatla <srinivas.kandagatla@linaro.org>]

Hi Xilin

On 25/05/2024 08:12, Xilin Wu wrote:
> Hi Srini,
> 
> On 2024/5/24 20:50, Srinivas Kandagatla wrote:
>> Hi Xilin,
>>
>> On 23/05/2024 05:09, Xilin Wu wrote:
>>>>
>>>> Srinivas Kandagatla (4):
>>>>    ASoC: qcom: q6dsp: parse Display port tokens
>>>>    ASoC: qcom: common: add Display port Jack function
>>>>    ASoC: qcom: sc8280xp: add Display port Jack
>>>>    ASoC: qcom: sm8250: fix a typo in function name
>>>>
>>>>   sound/soc/qcom/common.c         | 29 +++++++++++++++++++++++++++++
>>>>   sound/soc/qcom/common.h         |  3 +++
>>>>   sound/soc/qcom/qdsp6/topology.c | 26 ++++++++++++++++++++++++++
>>>>   sound/soc/qcom/sc8280xp.c       | 14 ++++++++++++++
>>>>   sound/soc/qcom/sm8250.c         |  4 ++--
>>>>   5 files changed, 74 insertions(+), 2 deletions(-)
>>>>
>>>
>>> Hi Srini,
>>>
>>> I tested this series on SM8550 with tplg in [1] and ucm in [2]. But 
>>> the kernel output errors attached below. Headphone does work properly 
>>> without DisplayPort in the ucm.
>>>
>>> What could be the possible cause of this? Is there any significant 
>>> change from sc8280xp to sm8550?
>>>
>>> -- 
>>> Thanks,
>>> Xilin Wu
>>>
>>> [1] 
>>> https://github.com/edk2-porting/audioreach-topology/blob/sakuramist/QCS8550-AYN-ODIN2.m4
>>> [2] 

For sm8550 you would need this patch for tplg

https://git.codelinaro.org/krzysztof.kozlowski/audioreach-topology/-/commit/d8ef47bc85700a7cdfabee5e06808d9f359b0a26

can you try this as the Container CAP Id changed for platforms from sm8550.

Kryzstof verified Display port tplg and these patches on x1e80100.


thanks,
srini

>>> https://github.com/strongtz/alsa-ucm-conf/blob/odin2/ucm2/Qualcomm/sm8550/HiFi.conf
>>>
>>> [ 1552.313713] qcom-apm gprsvc:service:2:1: Error (1) Processing 
>>> 0x01001000 cmd
>>> [ 1552.313730] qcom-apm gprsvc:service:2:1: DSP returned 
>>> error[1001000] 1
>>> [ 1552.314455] qcom-apm gprsvc:service:2:1: Error (1) Processing 
>>
>> Is the DP cable connected?
> 
> I'm sure that the cable is connected and I have desktop on external 
> display.
> If it's not connected, kernel gives the following error when using aplay:
> 
> hdmi-audio-codec hdmi-audio-codec.1.auto: ASoC: error at 
> snd_soc_dai_hw_params on i2s-hifi: -22
> 
>>
>> if its not connected the dsp will throw this error.
>>
>> due to this issue I did workaround this issue by modeling it as 
>> conflicting device to Speaker in x13s ucm.
>>
>> I see in your ucm setup its not the case.
>> which is why you might be hitting this issue.
>>
>> Can you try
>> amixer -c 0 cset iface=MIXER,name='DISPLAY_PORT_RX_0 Audio Mixer 
>> MultiMedia2' 1
>> aplay -D plughw:0,1 some-wav-file.wav
>>
>> both with and without display connected.
>>
> 
> aplay always gives the following error:
> 
> Playing WAVE 'Summer.wav' : Signed 16 bit Little Endian, Rate 44100 Hz, 
> Stereo
> aplay: set_params:1456: Unable to install hw params:
> ACCESS:  RW_INTERLEAVED
> FORMAT:  S16_LE
> SUBFORMAT:  STD
> SAMPLE_BITS: 16
> FRAME_BITS: 32
> CHANNELS: 2
> RATE: 44100
> PERIOD_TIME: (42666 42667)
> PERIOD_SIZE: (1881 1882)
> PERIOD_BYTES: (7524 7528)
> PERIODS: (3 5)
> BUFFER_TIME: (170657 170658)
> BUFFER_SIZE: 7526
> BUFFER_BYTES: 30104
> TICK_TIME: 0
> 
> and kernel gives the following when display is connected:
> 
> [drm:dp_catalog_audio_config_sdp] sdp_cfg = 0x100066
> [drm:dp_catalog_audio_config_sdp] sdp_cfg2 = 0x1b800004
> [drm:dp_audio_hw_params] Header Byte 1: value = 0xce020000, parity_byte 
> = 0xce
> [drm:dp_audio_hw_params] Header Byte 2: value = 0x67010000, parity_byte 
> = 0x0
> [drm:dp_audio_hw_params] Header Byte 3: value = 0x67010000, parity_byte 
> = 0x67
> [drm:dp_audio_hw_params] Header Byte 1: value = 0x67010000, parity_byte 
> = 0x67
> [drm:dp_audio_hw_params] Header Byte 2: value = 0x33443517, parity_byte 
> = 0x35
> [drm:dp_audio_hw_params] Header Byte 3: value = 0x33443517, parity_byte 
> = 0x33
> [drm:dp_audio_hw_params] Header Byte 1: value = 0x84840000, parity_byte 
> = 0x84
> [drm:dp_audio_hw_params] Header Byte 2: value = 0x3344d71b, parity_byte 
> = 0xd7
> [drm:dp_audio_hw_params] Header Byte 3: value = 0x44, parity_byte = 0x33
> [drm:dp_audio_hw_params] Header Byte 1: value = 0xd8050000, parity_byte 
> = 0xd8
> [drm:dp_audio_hw_params] Header Byte 2: value = 0x4b0f, parity_byte = 0x4b
> [drm:dp_audio_hw_params] Header Byte 3: value = 0x4b0f, parity_byte = 0x0
> [drm:dp_audio_hw_params] Header Byte 1: value = 0x71060000, parity_byte 
> = 0x71
> [drm:dp_audio_hw_params] Header Byte 2: value = 0x4b0f, parity_byte = 0x4b
> [drm:dp_catalog_audio_config_acr] select: 0x3, acr_ctrl: 0x80004130
> [drm:dp_catalog_audio_sfe_level] mainlink_level = 0xa08, 
> safe_to_exit_level = 0x8
> [drm:dp_catalog_audio_enable] dp_audio_cfg = 0xc1
> qcom-apm gprsvc:service:2:1: Error (1) Processing 0x01001006 cmd
> qcom-apm gprsvc:service:2:1: DSP returned error[1001006] 1
> qcom-apm gprsvc:service:2:1: Error (1) Processing 0x01001006 cmd
> qcom-apm gprsvc:service:2:1: DSP returned error[1001006] 1
> qcom-apm gprsvc:service:2:1: Error (1) Processing 0x01001001 cmd
> qcom-apm gprsvc:service:2:1: DSP returned error[1001001] 1
> q6apm-lpass-dais 30000000.remoteproc:glink-edge:gpr:service@1:bedais: 
> Failed to prepare Graph -22
> q6apm-lpass-dais 30000000.remoteproc:glink-edge:gpr:service@1:bedais: 
> ASoC: error at snd_soc_pcm_dai_prepare on DISPLAY_PORT_RX_0: -22
> [drm:dp_catalog_audio_enable] dp_audio_cfg = 0xc0
> 
>>
>> --srini
>>
>>
>>
>>> 0x01001006 cmd
>>> [ 1552.314463] qcom-apm gprsvc:service:2:1: DSP returned 
>>> error[1001006] 1
>>> [ 1552.315496] qcom-apm gprsvc:service:2:1: Error (1) Processing 
>>> 0x01001006 cmd
>>> [ 1552.315506] qcom-apm gprsvc:service:2:1: DSP returned 
>>> error[1001006] 1
>>> [ 1552.316033] qcom-apm gprsvc:service:2:1: Error (1) Processing 
>>> 0x01001001 cmd
>>> [ 1552.316042] qcom-apm gprsvc:service:2:1: DSP returned 
>>> error[1001001] 1
>>> [ 1552.316045] q6apm-lpass-dais 
>>> 30000000.remoteproc:glink-edge:gpr:service@1:bedais: Failed to 
>>> prepare Graph -22
>>> [ 1552.316047] q6apm-lpass-dais 
>>> 30000000.remoteproc:glink-edge:gpr:service@1:bedais: ASoC: error at 
>>> snd_soc_pcm_dai_prepare on DISPLAY_PORT_RX_0: -22
>