From: Gilboa Davara <gilboad@gmail.com>
To: Lennart Sorensen <lsorense@csclub.uwaterloo.ca>
Cc: LKML Linux Kernel <linux-kernel@vger.kernel.org>
Subject: Re: Kernel Development & Objective-C
Date: Wed, 05 Dec 2007 12:31:34 +0200 [thread overview]
Message-ID: <1196850694.23475.8.camel@gilboa-work-dev.localdomain> (raw)
In-Reply-To: <20071204175046.GC2310@csclub.uwaterloo.ca>
On Tue, 2007-12-04 at 12:50 -0500, Lennart Sorensen wrote:
> On Mon, Dec 03, 2007 at 02:35:31PM +0200, Gilboa Davara wrote:
> > Intel's newest dual 10GbE NIC can easily (?) throw ~14M packets per
> > second. (theoretical peak at 1514bytes/frame)
> > Granted, installing such a device on a single CPU/single core machine is
> > absurd - but even on an 8 core machine (2 x Xeon 53xx/54xx / AMD
> > Barcelona) it can still generate ~1M packets/s per core.
>
> 10GbE can't do 14M packets per second if the packets are 1514 bytes. At
> 10M packets per second you have less than 1000 bits per packet, which is
> far from 1514bytes.
>
> 10Gbps gives you at most 1.25GBps, which at 1514 bytes per packet works
> out to 825627 packets per second. You could reach ~14M packets per
> second with only the smallest packet size, which is rather unusual for
> high throughput traffic, since you waste almost all the bytes on
> overhead in that case. But you do want to be able to handle at least a
> million or two packets per second to do 10GbE.
... I corrected my math in the second email. [1]
Never the less, a VOIP network (E.g. G729 and friends) can generate the
maximum number of frames allowed on 10GbE Ethernet which is, AFAIR just
below 15M -per- port. (~29M on a dual port card)
While I doubt that any non-NPU based NIC can handle such a load, on
mixed networks we're already seeing well-above 1M frames per port.
- Gilboa
[1] http://lkml.org/lkml/2007/12/3/69
next prev parent reply other threads:[~2007-12-05 10:32 UTC|newest]
Thread overview: 57+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-11-29 12:14 Ben Crowhurst
2007-11-30 10:02 ` Xavier Bestel
2007-11-30 10:09 ` KOSAKI Motohiro
2007-11-30 10:20 ` Xavier Bestel
2007-11-30 10:54 ` Jan Engelhardt
2007-11-30 14:21 ` David Newall
2007-11-30 23:31 ` Bill Davidsen
2007-11-30 23:40 ` Alan Cox
2007-12-01 0:05 ` Arnaldo Carvalho de Melo
2007-12-01 18:27 ` Bill Davidsen
2007-12-01 18:18 ` Alan Cox
2007-12-03 1:23 ` Bill Davidsen
2007-11-30 22:52 ` J.A. Magallón
2007-11-30 10:29 ` Loïc Grenié
2007-11-30 11:16 ` Ben Crowhurst
2007-11-30 11:36 ` Karol Swietlicki
2007-11-30 14:37 ` Lennart Sorensen
2007-12-08 8:54 ` Rogelio M. Serrano Jr.
2007-11-30 23:19 ` J.A. Magallón
2007-11-30 23:53 ` Nicholas Miell
2007-12-01 0:31 ` Al Viro
2007-12-01 0:34 ` Al Viro
2007-12-01 1:09 ` J.A. Magallón
2007-12-01 19:55 ` Avi Kivity
2007-12-04 17:54 ` Lennart Sorensen
2007-12-04 21:10 ` Avi Kivity
2007-12-04 21:24 ` J.A. Magallón
2007-11-30 11:37 ` Matti Aarnio
2007-11-30 14:34 ` Lennart Sorensen
2007-11-30 15:26 ` Kyle Moffett
2007-11-30 18:40 ` H. Peter Anvin
2007-11-30 19:35 ` Kyle Moffett
2007-12-01 20:03 ` Avi Kivity
2007-12-02 19:01 ` Andi Kleen
2007-12-03 5:12 ` Avi Kivity
2007-12-03 9:50 ` Andi Kleen
2007-12-03 11:46 ` Avi Kivity
2007-12-03 11:50 ` Andi Kleen
2007-12-03 21:13 ` Willy Tarreau
2007-12-03 21:39 ` J.A. Magallón
2007-12-03 21:57 ` Alan Cox
2007-12-04 21:47 ` J.A. Magallón
2007-12-04 22:20 ` Diego Calleja
2007-12-05 10:59 ` Giacomo A. Catenazzi
2007-12-04 21:07 ` Avi Kivity
2007-12-04 22:43 ` Willy Tarreau
2007-12-05 17:05 ` Micro vs macro optimizations (was: Re: Kernel Development & Objective-C) Avi Kivity
2007-12-03 12:35 ` Kernel Development & Objective-C Gilboa Davara
2007-12-03 12:44 ` Gilboa Davara
2007-12-03 16:28 ` Casey Schaufler
2007-12-04 17:50 ` Lennart Sorensen
2007-12-05 10:31 ` Gilboa Davara [this message]
2007-12-01 19:59 ` Avi Kivity
2007-12-02 19:44 ` Jörn Engel
2007-12-03 16:53 ` Lennart Sorensen
2007-11-30 15:00 ` Chris Snook
2007-12-01 9:50 ` David Newall
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1196850694.23475.8.camel@gilboa-work-dev.localdomain \
--to=gilboad@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=lsorense@csclub.uwaterloo.ca \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®