From: Mike Frysinger <vapier@gentoo.org>
To: linux-kernel@vger.kernel.org
Cc: uclinux-dist-devel@blackfin.uclinux.org,
Graf Yang <graf.yang@analog.com>
Subject: [PATCH 32/62] Blackfin: add support for gptimer0 as a tick source
Date: Fri, 5 Jun 2009 04:04:41 -0400 [thread overview]
Message-ID: <1244189111-19639-33-git-send-email-vapier@gentoo.org> (raw)
In-Reply-To: <1244189111-19639-1-git-send-email-vapier@gentoo.org>
From: Graf Yang <graf.yang@analog.com>
For systems where the core cycles are not a usable tick source (like SMP
or cycles gets updated), enable gptimer0 as an alternative.
Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
---
arch/blackfin/Kconfig | 32 +++--
arch/blackfin/include/asm/time.h | 1 +
arch/blackfin/kernel/time-ts.c | 220 ++++++++++++++++++++++++-----
arch/blackfin/kernel/time.c | 10 +-
arch/blackfin/mach-bf518/Kconfig | 1 +
arch/blackfin/mach-bf527/Kconfig | 1 +
arch/blackfin/mach-bf533/Kconfig | 1 +
arch/blackfin/mach-bf537/Kconfig | 1 +
arch/blackfin/mach-bf538/Kconfig | 1 +
arch/blackfin/mach-bf548/Kconfig | 1 +
arch/blackfin/mach-bf561/Kconfig | 1 +
arch/blackfin/mach-bf561/smp.c | 2 +-
arch/blackfin/mach-common/ints-priority.c | 23 +---
arch/blackfin/mach-common/smp.c | 5 +-
14 files changed, 227 insertions(+), 73 deletions(-)
diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig
index cea2bfd..c04e7a4 100644
--- a/arch/blackfin/Kconfig
+++ b/arch/blackfin/Kconfig
@@ -241,12 +241,6 @@ config IRQ_PER_CPU
depends on SMP
default y
-config TICK_SOURCE_SYSTMR0
- bool
- select BFIN_GPTIMERS
- depends on SMP
- default y
-
config BF_REV_MIN
int
default 0 if (BF51x || BF52x || (BF54x && !BF54xM))
@@ -607,7 +601,6 @@ source kernel/Kconfig.hz
config GENERIC_TIME
bool "Generic time"
- depends on !SMP
default y
config GENERIC_CLOCKEVENTS
@@ -615,12 +608,26 @@ config GENERIC_CLOCKEVENTS
depends on GENERIC_TIME
default y
+choice
+ prompt "Kernel Tick Source"
+ depends on GENERIC_CLOCKEVENTS
+ default TICKSOURCE_CORETMR
+
+config TICKSOURCE_GPTMR0
+ bool "Gptimer0 (SCLK domain)"
+ select BFIN_GPTIMERS
+ depends on !IPIPE
+
+config TICKSOURCE_CORETMR
+ bool "Core timer (CCLK domain)"
+
+endchoice
+
config CYCLES_CLOCKSOURCE
- bool "Use 'CYCLES' as a clocksource (EXPERIMENTAL)"
- depends on EXPERIMENTAL
+ bool "Use 'CYCLES' as a clocksource"
depends on GENERIC_CLOCKEVENTS
depends on !BFIN_SCRATCH_REG_CYCLES
- default n
+ depends on !SMP
help
If you say Y here, you will enable support for using the 'cycles'
registers as a clock source. Doing so means you will be unable to
@@ -628,6 +635,11 @@ config CYCLES_CLOCKSOURCE
still be able to read it (such as for performance monitoring), but
writing the registers will most likely crash the kernel.
+config GPTMR0_CLOCKSOURCE
+ bool "Use GPTimer0 as a clocksource (higher rating)"
+ depends on GENERIC_CLOCKEVENTS
+ depends on !TICKSOURCE_GPTMR0
+
source kernel/time/Kconfig
comment "Misc"
diff --git a/arch/blackfin/include/asm/time.h b/arch/blackfin/include/asm/time.h
index ddc43ce..589e937 100644
--- a/arch/blackfin/include/asm/time.h
+++ b/arch/blackfin/include/asm/time.h
@@ -37,4 +37,5 @@ extern unsigned long long __bfin_cycles_off;
extern unsigned int __bfin_cycles_mod;
#endif
+extern void __init setup_core_timer(void);
#endif
diff --git a/arch/blackfin/kernel/time-ts.c b/arch/blackfin/kernel/time-ts.c
index 2764612..d9a6fe4 100644
--- a/arch/blackfin/kernel/time-ts.c
+++ b/arch/blackfin/kernel/time-ts.c
@@ -20,8 +20,9 @@
#include <asm/blackfin.h>
#include <asm/time.h>
+#include <asm/gptimers.h>
-#ifdef CONFIG_CYCLES_CLOCKSOURCE
+#if defined(CONFIG_CYCLES_CLOCKSOURCE)
/* Accelerators for sched_clock()
* convert from cycles(64bits) => nanoseconds (64bits)
@@ -63,10 +64,10 @@ static cycle_t read_cycles(struct clocksource *cs)
return __bfin_cycles_off + (get_cycles() << __bfin_cycles_mod);
}
-static struct clocksource clocksource_bfin = {
- .name = "bfin_cycles",
+static struct clocksource bfin_cs_cycles = {
+ .name = "bfin_cs_cycles",
.rating = 350,
- .read = read_cycles,
+ .read = bfin_read_cycles,
.mask = CLOCKSOURCE_MASK(64),
.shift = 22,
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
@@ -74,53 +75,198 @@ static struct clocksource clocksource_bfin = {
unsigned long long sched_clock(void)
{
- return cycles_2_ns(read_cycles(&clocksource_bfin));
+ return cycles_2_ns(read_cycles(&bfin_cs_cycles));
}
-static int __init bfin_clocksource_init(void)
+static int __init bfin_cs_cycles_init(void)
{
set_cyc2ns_scale(get_cclk() / 1000);
- clocksource_bfin.mult = clocksource_hz2mult(get_cclk(), clocksource_bfin.shift);
+ bfin_cs_cycles.mult = \
+ clocksource_hz2mult(get_cclk(), bfin_cs_cycles.shift);
- if (clocksource_register(&clocksource_bfin))
+ if (clocksource_register(&bfin_cs_cycles))
panic("failed to register clocksource");
return 0;
}
+#else
+# define bfin_cs_cycles_init()
+#endif
+
+#ifdef CONFIG_GPTMR0_CLOCKSOURCE
+
+void __init setup_gptimer0(void)
+{
+ disable_gptimers(TIMER0bit);
+
+ set_gptimer_config(TIMER0_id, \
+ TIMER_OUT_DIS | TIMER_PERIOD_CNT | TIMER_MODE_PWM);
+ set_gptimer_period(TIMER0_id, -1);
+ set_gptimer_pwidth(TIMER0_id, -2);
+ SSYNC();
+ enable_gptimers(TIMER0bit);
+}
+
+static cycle_t bfin_read_gptimer0(void)
+{
+ return bfin_read_TIMER0_COUNTER();
+}
+
+static struct clocksource bfin_cs_gptimer0 = {
+ .name = "bfin_cs_gptimer0",
+ .rating = 400,
+ .read = bfin_read_gptimer0,
+ .mask = CLOCKSOURCE_MASK(32),
+ .shift = 22,
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static int __init bfin_cs_gptimer0_init(void)
+{
+ setup_gptimer0();
+ bfin_cs_gptimer0.mult = \
+ clocksource_hz2mult(get_sclk(), bfin_cs_gptimer0.shift);
+
+ if (clocksource_register(&bfin_cs_gptimer0))
+ panic("failed to register clocksource");
+
+ return 0;
+}
#else
-# define bfin_clocksource_init()
+# define bfin_cs_gptimer0_init()
#endif
+#ifdef CONFIG_CORE_TIMER_IRQ_L1
+__attribute__((l1_text))
+#endif
+irqreturn_t timer_interrupt(int irq, void *dev_id);
+
+static int bfin_timer_set_next_event(unsigned long, \
+ struct clock_event_device *);
+
+static void bfin_timer_set_mode(enum clock_event_mode, \
+ struct clock_event_device *);
+
+static struct clock_event_device clockevent_bfin = {
+#if defined(CONFIG_TICKSOURCE_GPTMR0)
+ .name = "bfin_gptimer0",
+ .rating = 300,
+ .irq = IRQ_TIMER0,
+#else
+ .name = "bfin_core_timer",
+ .rating = 350,
+ .irq = IRQ_CORETMR,
+#endif
+ .shift = 32,
+ .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+ .set_next_event = bfin_timer_set_next_event,
+ .set_mode = bfin_timer_set_mode,
+};
+
+static struct irqaction bfin_timer_irq = {
+#if defined(CONFIG_TICKSOURCE_GPTMR0)
+ .name = "Blackfin GPTimer0",
+#else
+ .name = "Blackfin CoreTimer",
+#endif
+ .flags = IRQF_DISABLED | IRQF_TIMER | \
+ IRQF_IRQPOLL | IRQF_PERCPU,
+ .handler = timer_interrupt,
+ .dev_id = &clockevent_bfin,
+};
+
+#if defined(CONFIG_TICKSOURCE_GPTMR0)
static int bfin_timer_set_next_event(unsigned long cycles,
struct clock_event_device *evt)
{
+ disable_gptimers(TIMER0bit);
+
+ /* it starts counting three SCLK cycles after the TIMENx bit is set */
+ set_gptimer_pwidth(TIMER0_id, cycles - 3);
+ enable_gptimers(TIMER0bit);
+ return 0;
+}
+
+static void bfin_timer_set_mode(enum clock_event_mode mode,
+ struct clock_event_device *evt)
+{
+ switch (mode) {
+ case CLOCK_EVT_MODE_PERIODIC: {
+ set_gptimer_config(TIMER0_id, \
+ TIMER_OUT_DIS | TIMER_IRQ_ENA | \
+ TIMER_PERIOD_CNT | TIMER_MODE_PWM);
+ set_gptimer_period(TIMER0_id, get_sclk() / HZ);
+ set_gptimer_pwidth(TIMER0_id, get_sclk() / HZ - 1);
+ enable_gptimers(TIMER0bit);
+ break;
+ }
+ case CLOCK_EVT_MODE_ONESHOT:
+ disable_gptimers(TIMER0bit);
+ set_gptimer_config(TIMER0_id, \
+ TIMER_OUT_DIS | TIMER_IRQ_ENA | TIMER_MODE_PWM);
+ set_gptimer_period(TIMER0_id, 0);
+ break;
+ case CLOCK_EVT_MODE_UNUSED:
+ case CLOCK_EVT_MODE_SHUTDOWN:
+ disable_gptimers(TIMER0bit);
+ break;
+ case CLOCK_EVT_MODE_RESUME:
+ break;
+ }
+}
+
+static void bfin_timer_ack(void)
+{
+ set_gptimer_status(TIMER_GROUP1, TIMER_STATUS_TIMIL0);
+}
+
+static void __init bfin_timer_init(void)
+{
+ disable_gptimers(TIMER0bit);
+}
+
+static unsigned long __init bfin_clockevent_check(void)
+{
+ setup_irq(IRQ_TIMER0, &bfin_timer_irq);
+ return get_sclk();
+}
+
+#else /* CONFIG_TICKSOURCE_CORETMR */
+
+static int bfin_timer_set_next_event(unsigned long cycles,
+ struct clock_event_device *evt)
+{
+ bfin_write_TCNTL(TMPWR);
+ CSYNC();
bfin_write_TCOUNT(cycles);
CSYNC();
+ bfin_write_TCNTL(TMPWR | TMREN);
return 0;
}
static void bfin_timer_set_mode(enum clock_event_mode mode,
- struct clock_event_device *evt)
+ struct clock_event_device *evt)
{
switch (mode) {
case CLOCK_EVT_MODE_PERIODIC: {
unsigned long tcount = ((get_cclk() / (HZ * TIME_SCALE)) - 1);
bfin_write_TCNTL(TMPWR);
- bfin_write_TSCALE(TIME_SCALE - 1);
CSYNC();
+ bfin_write_TSCALE(TIME_SCALE - 1);
bfin_write_TPERIOD(tcount);
bfin_write_TCOUNT(tcount);
- bfin_write_TCNTL(TMPWR | TMREN | TAUTORLD);
CSYNC();
+ bfin_write_TCNTL(TMPWR | TMREN | TAUTORLD);
break;
}
case CLOCK_EVT_MODE_ONESHOT:
+ bfin_write_TCNTL(TMPWR);
+ CSYNC();
bfin_write_TSCALE(TIME_SCALE - 1);
+ bfin_write_TPERIOD(0);
bfin_write_TCOUNT(0);
- bfin_write_TCNTL(TMPWR | TMREN);
- CSYNC();
break;
case CLOCK_EVT_MODE_UNUSED:
case CLOCK_EVT_MODE_SHUTDOWN:
@@ -132,6 +278,10 @@ static void bfin_timer_set_mode(enum clock_event_mode mode,
}
}
+static void bfin_timer_ack(void)
+{
+}
+
static void __init bfin_timer_init(void)
{
/* power up the timer, but don't enable it just yet */
@@ -145,38 +295,32 @@ static void __init bfin_timer_init(void)
bfin_write_TPERIOD(0);
bfin_write_TCOUNT(0);
- /* now enable the timer */
CSYNC();
}
+static unsigned long __init bfin_clockevent_check(void)
+{
+ setup_irq(IRQ_CORETMR, &bfin_timer_irq);
+ return get_cclk() / TIME_SCALE;
+}
+
+void __init setup_core_timer(void)
+{
+ bfin_timer_init();
+ bfin_timer_set_mode(CLOCK_EVT_MODE_PERIODIC, NULL);
+}
+#endif /* CONFIG_TICKSOURCE_GPTMR0 */
+
/*
* timer_interrupt() needs to keep up the real-time clock,
* as well as call the "do_timer()" routine every clocktick
*/
-#ifdef CONFIG_CORE_TIMER_IRQ_L1
-__attribute__((l1_text))
-#endif
-irqreturn_t timer_interrupt(int irq, void *dev_id);
-
-static struct clock_event_device clockevent_bfin = {
- .name = "bfin_core_timer",
- .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
- .shift = 32,
- .set_next_event = bfin_timer_set_next_event,
- .set_mode = bfin_timer_set_mode,
-};
-
-static struct irqaction bfin_timer_irq = {
- .name = "Blackfin Core Timer",
- .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
- .handler = timer_interrupt,
- .dev_id = &clockevent_bfin,
-};
-
irqreturn_t timer_interrupt(int irq, void *dev_id)
{
struct clock_event_device *evt = dev_id;
+ smp_mb();
evt->event_handler(evt);
+ bfin_timer_ack();
return IRQ_HANDLED;
}
@@ -184,9 +328,8 @@ static int __init bfin_clockevent_init(void)
{
unsigned long timer_clk;
- timer_clk = get_cclk() / TIME_SCALE;
+ timer_clk = bfin_clockevent_check();
- setup_irq(IRQ_CORETMR, &bfin_timer_irq);
bfin_timer_init();
clockevent_bfin.mult = div_sc(timer_clk, NSEC_PER_SEC, clockevent_bfin.shift);
@@ -218,6 +361,7 @@ void __init time_init(void)
xtime.tv_nsec = 0;
set_normalized_timespec(&wall_to_monotonic, -xtime.tv_sec, -xtime.tv_nsec);
- bfin_clocksource_init();
+ bfin_cs_cycles_init();
+ bfin_cs_gptimer0_init();
bfin_clockevent_init();
}
diff --git a/arch/blackfin/kernel/time.c b/arch/blackfin/kernel/time.c
index 1bbacfb..daa02d4 100644
--- a/arch/blackfin/kernel/time.c
+++ b/arch/blackfin/kernel/time.c
@@ -31,7 +31,7 @@ static struct irqaction bfin_timer_irq = {
#endif
};
-#if defined(CONFIG_TICK_SOURCE_SYSTMR0) || defined(CONFIG_IPIPE)
+#if defined(CONFIG_TICKSOURCE_GPTMR0) || defined(CONFIG_IPIPE)
void __init setup_system_timer0(void)
{
/* Power down the core timer, just to play safe. */
@@ -74,7 +74,7 @@ void __init setup_core_timer(void)
static void __init
time_sched_init(irqreturn_t(*timer_routine) (int, void *))
{
-#if defined(CONFIG_TICK_SOURCE_SYSTMR0) || defined(CONFIG_IPIPE)
+#if defined(CONFIG_TICKSOURCE_GPTMR0) || defined(CONFIG_IPIPE)
setup_system_timer0();
bfin_timer_irq.handler = timer_routine;
setup_irq(IRQ_TIMER0, &bfin_timer_irq);
@@ -94,7 +94,7 @@ static unsigned long gettimeoffset(void)
unsigned long offset;
unsigned long clocks_per_jiffy;
-#if defined(CONFIG_TICK_SOURCE_SYSTMR0) || defined(CONFIG_IPIPE)
+#if defined(CONFIG_TICKSOURCE_GPTMR0) || defined(CONFIG_IPIPE)
clocks_per_jiffy = bfin_read_TIMER0_PERIOD();
offset = bfin_read_TIMER0_COUNTER() / \
(((clocks_per_jiffy + 1) * HZ) / USEC_PER_SEC);
@@ -133,7 +133,7 @@ irqreturn_t timer_interrupt(int irq, void *dummy)
static long last_rtc_update;
write_seqlock(&xtime_lock);
-#if defined(CONFIG_TICK_SOURCE_SYSTMR0) && !defined(CONFIG_IPIPE)
+#if defined(CONFIG_TICKSOURCE_GPTMR0) && !defined(CONFIG_IPIPE)
/*
* TIMIL0 is latched in __ipipe_grab_irq() when the I-Pipe is
* enabled.
@@ -159,7 +159,7 @@ irqreturn_t timer_interrupt(int irq, void *dummy)
/* Do it again in 60s. */
last_rtc_update = xtime.tv_sec - 600;
}
-#if defined(CONFIG_TICK_SOURCE_SYSTMR0) && !defined(CONFIG_IPIPE)
+#if defined(CONFIG_TICKSOURCE_GPTMR0) && !defined(CONFIG_IPIPE)
set_gptimer_status(0, TIMER_STATUS_TIMIL0);
}
#endif
diff --git a/arch/blackfin/mach-bf518/Kconfig b/arch/blackfin/mach-bf518/Kconfig
index f397ede..4c76fef 100644
--- a/arch/blackfin/mach-bf518/Kconfig
+++ b/arch/blackfin/mach-bf518/Kconfig
@@ -156,6 +156,7 @@ config IRQ_PORTH_INTB
default 11
config IRQ_TIMER0
int "IRQ_TIMER0"
+ default 7 if TICKSOURCE_GPTMR0
default 8
config IRQ_TIMER1
int "IRQ_TIMER1"
diff --git a/arch/blackfin/mach-bf527/Kconfig b/arch/blackfin/mach-bf527/Kconfig
index 8438ec6..848ac6f 100644
--- a/arch/blackfin/mach-bf527/Kconfig
+++ b/arch/blackfin/mach-bf527/Kconfig
@@ -170,6 +170,7 @@ config IRQ_PORTH_INTB
default 11
config IRQ_TIMER0
int "IRQ_TIMER0"
+ default 7 if TICKSOURCE_GPTMR0
default 8
config IRQ_TIMER1
int "IRQ_TIMER1"
diff --git a/arch/blackfin/mach-bf533/Kconfig b/arch/blackfin/mach-bf533/Kconfig
index 14427de..4c57244 100644
--- a/arch/blackfin/mach-bf533/Kconfig
+++ b/arch/blackfin/mach-bf533/Kconfig
@@ -59,6 +59,7 @@ config DMA7_UARTTX
default 10
config TIMER0
int "TIMER0"
+ default 7 if TICKSOURCE_GPTMR0
default 8
config TIMER1
int "TIMER1"
diff --git a/arch/blackfin/mach-bf537/Kconfig b/arch/blackfin/mach-bf537/Kconfig
index bbc08fd..d81224f 100644
--- a/arch/blackfin/mach-bf537/Kconfig
+++ b/arch/blackfin/mach-bf537/Kconfig
@@ -66,6 +66,7 @@ config IRQ_MAC_TX
default 11
config IRQ_TIMER0
int "IRQ_TIMER0"
+ default 7 if TICKSOURCE_GPTMR0
default 8
config IRQ_TIMER1
int "IRQ_TIMER1"
diff --git a/arch/blackfin/mach-bf538/Kconfig b/arch/blackfin/mach-bf538/Kconfig
index f068c35..2d280f5 100644
--- a/arch/blackfin/mach-bf538/Kconfig
+++ b/arch/blackfin/mach-bf538/Kconfig
@@ -57,6 +57,7 @@ config IRQ_UART0_TX
default 10
config IRQ_TIMER0
int "IRQ_TIMER0"
+ default 7 if TICKSOURCE_GPTMR0
default 8
config IRQ_TIMER1
int "IRQ_TIMER1"
diff --git a/arch/blackfin/mach-bf548/Kconfig b/arch/blackfin/mach-bf548/Kconfig
index 8d24eaa..a09623d 100644
--- a/arch/blackfin/mach-bf548/Kconfig
+++ b/arch/blackfin/mach-bf548/Kconfig
@@ -257,6 +257,7 @@ config IRQ_OTPSEC
default 11
config IRQ_TIMER0
int "IRQ_TIMER0"
+ default 7 if TICKSOURCE_GPTMR0
default 8
config IRQ_TIMER1
int "IRQ_TIMER1"
diff --git a/arch/blackfin/mach-bf561/Kconfig b/arch/blackfin/mach-bf561/Kconfig
index 6965dd5..cb97436 100644
--- a/arch/blackfin/mach-bf561/Kconfig
+++ b/arch/blackfin/mach-bf561/Kconfig
@@ -125,6 +125,7 @@ config IRQ_DMA2_11
default 9
config IRQ_TIMER0
int "TIMER 0 Interrupt"
+ default 7 if TICKSOURCE_GPTMR0
default 8
config IRQ_TIMER1
int "TIMER 1 Interrupt"
diff --git a/arch/blackfin/mach-bf561/smp.c b/arch/blackfin/mach-bf561/smp.c
index 4ea13d2..8c10701 100644
--- a/arch/blackfin/mach-bf561/smp.c
+++ b/arch/blackfin/mach-bf561/smp.c
@@ -133,7 +133,7 @@ void __init platform_request_ipi(irq_handler_t handler)
int ret;
ret = request_irq(IRQ_SUPPLE_0, handler, IRQF_DISABLED,
- "SMP interrupt", handler);
+ "Supplemental Interrupt0", handler);
if (ret)
panic("Cannot request supplemental interrupt 0 for IPI service");
}
diff --git a/arch/blackfin/mach-common/ints-priority.c b/arch/blackfin/mach-common/ints-priority.c
index 389c5e8..6e80861 100644
--- a/arch/blackfin/mach-common/ints-priority.c
+++ b/arch/blackfin/mach-common/ints-priority.c
@@ -1052,7 +1052,7 @@ int __init init_arch_irq(void)
set_irq_chained_handler(irq, bfin_demux_error_irq);
break;
#endif
-#if defined(CONFIG_TICK_SOURCE_SYSTMR0) || defined(CONFIG_IPIPE)
+#if defined(CONFIG_TICKSOURCE_GPTMR0)
case IRQ_TIMER0:
set_irq_handler(irq, handle_percpu_irq);
break;
@@ -1232,13 +1232,9 @@ asmlinkage int __ipipe_grab_irq(int vec, struct pt_regs *regs)
if (likely(vec == EVT_IVTMR_P)) {
irq = IRQ_CORETMR;
- goto core_tick;
- }
-
- SSYNC();
+ } else {
#if defined(CONFIG_BF54x) || defined(CONFIG_BF52x) || defined(CONFIG_BF561)
- {
unsigned long sic_status[3];
sic_status[0] = bfin_read_SIC_ISR0() & bfin_read_SIC_IMASK0();
@@ -1254,9 +1250,7 @@ asmlinkage int __ipipe_grab_irq(int vec, struct pt_regs *regs)
if (sic_status[(ivg->irqno - IVG7) / 32] & ivg->isrflag)
break;
}
- }
#else
- {
unsigned long sic_status;
sic_status = bfin_read_SIC_IMASK() & bfin_read_SIC_ISR();
@@ -1268,15 +1262,13 @@ asmlinkage int __ipipe_grab_irq(int vec, struct pt_regs *regs)
} else if (sic_status & ivg->isrflag)
break;
}
- }
#endif
- irq = ivg->irqno;
+ irq = ivg->irqno;
+ }
if (irq == IRQ_SYSTMR) {
-#ifdef CONFIG_GENERIC_CLOCKEVENTS
-core_tick:
-#else
+#ifndef CONFIG_GENERIC_CLOCKEVENTS
bfin_write_TIMER_STATUS(1); /* Latch TIMIL0 */
#endif
/* This is basically what we need from the register frame. */
@@ -1288,9 +1280,6 @@ core_tick:
__raw_get_cpu_var(__ipipe_tick_regs).ipend |= 0x10;
}
-#ifndef CONFIG_GENERIC_CLOCKEVENTS
-core_tick:
-#endif
if (this_domain == ipipe_root_domain) {
s = __test_and_set_bit(IPIPE_SYNCDEFER_FLAG, &p->status);
barrier();
@@ -1308,7 +1297,7 @@ core_tick:
}
}
- return 0;
+ return 0;
}
#endif /* CONFIG_IPIPE */
diff --git a/arch/blackfin/mach-common/smp.c b/arch/blackfin/mach-common/smp.c
index 187c79e..b669595 100644
--- a/arch/blackfin/mach-common/smp.c
+++ b/arch/blackfin/mach-common/smp.c
@@ -43,6 +43,7 @@
#include <asm/processor.h>
#include <asm/ptrace.h>
#include <asm/cpu.h>
+#include <asm/time.h>
#include <linux/err.h>
/*
@@ -356,7 +357,7 @@ int __cpuinit __cpu_up(unsigned int cpu)
static void __cpuinit setup_secondary(unsigned int cpu)
{
-#if !(defined(CONFIG_TICK_SOURCE_SYSTMR0) || defined(CONFIG_IPIPE))
+#if !defined(CONFIG_TICKSOURCE_GPTMR0)
struct irq_desc *timer_desc;
#endif
unsigned long ilat;
@@ -377,7 +378,7 @@ static void __cpuinit setup_secondary(unsigned int cpu)
IMASK_IVG14 | IMASK_IVG13 | IMASK_IVG12 | IMASK_IVG11 |
IMASK_IVG10 | IMASK_IVG9 | IMASK_IVG8 | IMASK_IVG7 | IMASK_IVGHW;
-#if defined(CONFIG_TICK_SOURCE_SYSTMR0) || defined(CONFIG_IPIPE)
+#if defined(CONFIG_TICKSOURCE_GPTMR0)
/* Power down the core timer, just to play safe. */
bfin_write_TCNTL(0);
--
1.6.3.1
next prev parent reply other threads:[~2009-06-05 8:17 UTC|newest]
Thread overview: 63+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-06-05 8:04 [PATCH 00/62] Blackfin arch updates for 2.6.31 Mike Frysinger
2009-06-05 8:04 ` [PATCH 01/62] Blackfin: add comment for anomaly 05000171 to init code Mike Frysinger
2009-06-05 8:04 ` [PATCH 02/62] Blackfin: add some help text to the EBIU_AMBCTL settings Mike Frysinger
2009-06-05 8:04 ` [PATCH 03/62] Blackfin: bf527-ezkit: add support for mmc-spi Mike Frysinger
2009-06-05 8:04 ` [PATCH 04/62] Blackfin: Allow bf548 ATAPI to be routed to GPIO Mike Frysinger
2009-06-05 8:04 ` [PATCH 05/62] Blackfin: allow scheduler functions to be placed into L1 Mike Frysinger
2009-06-05 8:04 ` [PATCH 06/62] Blackfin: fix link failure due to CONFIG_EXCEPTION_L1_SCRATCH Mike Frysinger
2009-06-05 8:04 ` [PATCH 07/62] Blackfin: fix data cache flushing when doing icache flushing Mike Frysinger
2009-06-05 8:04 ` [PATCH 08/62] Blackfin: fix bug found by traps test case 21 Mike Frysinger
2009-06-05 8:04 ` [PATCH 09/62] Blackfin: fix parentheses balance and convert some tab/space mixing Mike Frysinger
2009-06-05 8:04 ` [PATCH 10/62] Blackfin: fix warnings with I/O port macros Mike Frysinger
2009-06-05 8:04 ` [PATCH 11/62] Blackfin: merge Philippe's recent ipipe patch Mike Frysinger
2009-06-05 8:04 ` [PATCH 12/62] Blackfin: fix up PATA resource handling in bf537-stamp Mike Frysinger
2009-06-05 8:04 ` [PATCH 13/62] Blackfin: pull updated anomaly lists from toolchain Mike Frysinger
2009-06-05 8:04 ` [PATCH 14/62] Blackfin: do not error if GPIO IRQ is requested already as GPIO Mike Frysinger
2009-06-05 8:04 ` [PATCH 15/62] Blackfin: set bf51x/bf52x to 0.0 rev by default and bf54x to 0.2 Mike Frysinger
2009-06-05 8:04 ` [PATCH 16/62] Blackfin: simplify the do_flush macro Mike Frysinger
2009-06-05 8:04 ` [PATCH 17/62] Blackfin: update defconfigs Mike Frysinger
2009-06-05 8:04 ` [PATCH 18/62] Blackfin: simplify BF561 coreb driver greatly Mike Frysinger
2009-06-05 8:04 ` [PATCH 19/62] Blackfin: fix detection of cached L2 SRAM Mike Frysinger
2009-06-05 8:04 ` [PATCH 20/62] Blackfin: add MDMA defines to make cross-variant coding easier Mike Frysinger
2009-06-05 8:04 ` [PATCH 21/62] Blackfin: fix early L1 relocation crash Mike Frysinger
2009-06-05 8:04 ` [PATCH 22/62] Blackfin: document anomaly 05000234 workaround Mike Frysinger
2009-06-05 8:04 ` [PATCH 23/62] Blackfin: annotate anomaly 05000119 in core DMA code Mike Frysinger
2009-06-05 8:04 ` [PATCH 24/62] Blackfin: punt useless GPIO init call Mike Frysinger
2009-06-05 8:04 ` [PATCH 25/62] Blackfin: work around anomaly 05000287 Mike Frysinger
2009-06-05 8:04 ` [PATCH 26/62] Blackfin: delete unused sys_getpagesize() function Mike Frysinger
2009-06-05 8:04 ` [PATCH 27/62] Blackfin: workaround anomaly 05000227 Mike Frysinger
2009-06-05 8:04 ` [PATCH 28/62] Blackfin: do not append newlines to panic() messages Mike Frysinger
2009-06-05 8:04 ` [PATCH 29/62] Blackfin: detect anomaly 05000274 Mike Frysinger
2009-06-05 8:04 ` [PATCH 30/62] Blackfin: BF518F-EZBRD: handle required portmuxing of async pins Mike Frysinger
2009-06-05 8:04 ` [PATCH 31/62] Blackfin: annotate anomaly 05000120 Mike Frysinger
2009-06-05 8:04 ` Mike Frysinger [this message]
2009-06-05 8:04 ` [PATCH 33/62] Blackfin: add workaround for anomaly 05000287 Mike Frysinger
2009-06-05 8:04 ` [PATCH 34/62] Blackfin: make sure MPU CPLB for first 1k is marked as valid Mike Frysinger
2009-06-05 8:04 ` [PATCH 35/62] Blackfin: rename some Blackfin drivers Mike Frysinger
2009-06-05 8:04 ` [PATCH 36/62] Blackfin: work around anomaly 05000220 Mike Frysinger
2009-06-05 8:04 ` [PATCH 37/62] Blackfin: add note about anomaly 05000242 being worked around Mike Frysinger
2009-06-05 8:04 ` [PATCH 38/62] Blackfin: make deferred hardware errors more exact Mike Frysinger
2009-06-05 8:04 ` [PATCH 39/62] Blackfin: make sure stack is accessible before dumping it Mike Frysinger
2009-06-05 8:04 ` [PATCH 40/62] Blackfin: add workaround for anomaly 05000461 Mike Frysinger
2009-06-05 8:04 ` [PATCH 41/62] Blackfin: include system/processor info in dump messages Mike Frysinger
2009-06-05 8:04 ` [PATCH 42/62] Blackfin: update gptimers API Mike Frysinger
2009-06-05 8:04 ` [PATCH 43/62] Blackfin: drop unused reserve_pda() function Mike Frysinger
2009-06-05 8:04 ` [PATCH 44/62] Blackfin: merge sram init functions Mike Frysinger
2009-06-05 8:04 ` [PATCH 45/62] Blackfin: fix handling of initial L1 reservation Mike Frysinger
2009-06-05 8:04 ` [PATCH 46/62] Blackfin: fix command line corruption with DEBUG_DOUBLEFAULT Mike Frysinger
2009-06-05 8:04 ` [PATCH 47/62] Blackfin: override default uClinux MTD addr/size Mike Frysinger
2009-06-05 8:04 ` [PATCH 48/62] Blackfin: bf548-ezkit: add resources for ADXL345/346 Mike Frysinger
2009-06-05 8:04 ` [PATCH 49/62] Blackfin: convert SMP to only use generic time framework Mike Frysinger
2009-06-05 8:04 ` [PATCH 50/62] Blackfin: add SSYNC to set_dma_sg() for descriptor fetching Mike Frysinger
2009-06-05 8:05 ` [PATCH 51/62] Blackfin: check SIC defines rather than variant names Mike Frysinger
2009-06-05 8:05 ` [PATCH 52/62] Blackfin: rename Blackfin relocs according to the toolchain Mike Frysinger
2009-06-05 8:05 ` [PATCH 53/62] Blackfin: document the lsl variants of the L1 allocator Mike Frysinger
2009-06-05 8:05 ` [PATCH 54/62] Blackfin: convert early_printk EVT init to a loop Mike Frysinger
2009-06-05 8:05 ` [PATCH 55/62] Blackfin: add missing access_ok() checks to user functions Mike Frysinger
2009-06-05 8:05 ` [PATCH 56/62] Blackfin: punt duplicated search_exception_table() prototype Mike Frysinger
2009-06-05 8:05 ` [PATCH 57/62] Blackfin: push access_ok() L1 attribute down Mike Frysinger
2009-06-05 8:05 ` [PATCH 58/62] Blackfin: kgdb: fix up error return values Mike Frysinger
2009-06-05 8:05 ` [PATCH 59/62] Blackfin: fix length checking in kgdb_ebin2mem Mike Frysinger
2009-06-05 8:05 ` [PATCH 60/62] Blackfin: export the last exception cause via debugfs Mike Frysinger
2009-06-05 8:05 ` [PATCH 61/62] Blackfin: fix unused warnings after nommu update Mike Frysinger
2009-06-05 8:05 ` [PATCH 62/62] Blackfin: fix sparseirq/kstat_irqs fallout Mike Frysinger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1244189111-19639-33-git-send-email-vapier@gentoo.org \
--to=vapier@gentoo.org \
--cc=graf.yang@analog.com \
--cc=linux-kernel@vger.kernel.org \
--cc=uclinux-dist-devel@blackfin.uclinux.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®