From: Mike Frysinger <vapier@gentoo.org>
To: linux-kernel@vger.kernel.org
Cc: uclinux-dist-devel@blackfin.uclinux.org
Subject: [PATCH 58/62] Blackfin: kgdb: fix up error return values
Date: Fri, 5 Jun 2009 04:05:07 -0400 [thread overview]
Message-ID: <1244189111-19639-59-git-send-email-vapier@gentoo.org> (raw)
In-Reply-To: <1244189111-19639-1-git-send-email-vapier@gentoo.org>
The Blackfin kgdb code was all passing back positive errno values when it
really should have been using negative errno values.
Reported-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
---
arch/blackfin/kernel/kgdb.c | 55 +++++++++++++++++++++++-------------------
1 files changed, 30 insertions(+), 25 deletions(-)
diff --git a/arch/blackfin/kernel/kgdb.c b/arch/blackfin/kernel/kgdb.c
index b163f6d..c5362b2 100644
--- a/arch/blackfin/kernel/kgdb.c
+++ b/arch/blackfin/kernel/kgdb.c
@@ -466,7 +466,7 @@ static int validate_memory_access_address(unsigned long addr, int size)
int cpu = raw_smp_processor_id();
if (size < 0)
- return EFAULT;
+ return -EFAULT;
if (addr >= 0x1000 && (addr + size) <= physical_mem_end)
return 0;
if (addr >= SYSMMR_BASE)
@@ -498,7 +498,7 @@ static int validate_memory_access_address(unsigned long addr, int size)
if (IN_MEM(addr, size, L2_START, L2_LENGTH))
return 0;
- return EFAULT;
+ return -EFAULT;
}
/*
@@ -508,14 +508,15 @@ static int validate_memory_access_address(unsigned long addr, int size)
int kgdb_mem2hex(char *mem, char *buf, int count)
{
char *tmp;
- int err = 0;
+ int err;
unsigned char *pch;
unsigned short mmr16;
unsigned long mmr32;
int cpu = raw_smp_processor_id();
- if (validate_memory_access_address((unsigned long)mem, count))
- return EFAULT;
+ err = validate_memory_access_address((unsigned long)mem, count);
+ if (err)
+ return err;
/*
* We use the upper half of buf as an intermediate buffer for the
@@ -533,7 +534,7 @@ int kgdb_mem2hex(char *mem, char *buf, int count)
*tmp++ = *pch++;
tmp -= 2;
} else
- err = EFAULT;
+ err = -EFAULT;
break;
case 4:
if ((unsigned int)mem % 4 == 0) {
@@ -545,10 +546,10 @@ int kgdb_mem2hex(char *mem, char *buf, int count)
*tmp++ = *pch++;
tmp -= 4;
} else
- err = EFAULT;
+ err = -EFAULT;
break;
default:
- err = EFAULT;
+ err = -EFAULT;
}
} else if ((cpu == 0 && IN_MEM(mem, count, L1_CODE_START, L1_CODE_LENGTH))
#ifdef CONFIG_SMP
@@ -557,7 +558,7 @@ int kgdb_mem2hex(char *mem, char *buf, int count)
) {
/* access L1 instruction SRAM*/
if (dma_memcpy(tmp, mem, count) == NULL)
- err = EFAULT;
+ err = -EFAULT;
} else
err = probe_kernel_read(tmp, mem, count);
@@ -585,7 +586,7 @@ int kgdb_ebin2mem(char *buf, char *mem, int count)
char *tmp_new;
unsigned short *mmr16;
unsigned long *mmr32;
- int err = 0;
+ int err;
int size = 0;
int cpu = raw_smp_processor_id();
@@ -601,8 +602,9 @@ int kgdb_ebin2mem(char *buf, char *mem, int count)
size++;
}
- if (validate_memory_access_address((unsigned long)mem, size))
- return EFAULT;
+ err = validate_memory_access_address((unsigned long)mem, size);
+ if (err)
+ return err;
if ((unsigned int)mem >= SYSMMR_BASE) { /*access MMR registers*/
switch (size) {
@@ -611,17 +613,17 @@ int kgdb_ebin2mem(char *buf, char *mem, int count)
mmr16 = (unsigned short *)buf;
*(unsigned short *)mem = *mmr16;
} else
- return EFAULT;
+ err = -EFAULT;
break;
case 4:
if ((unsigned int)mem % 4 == 0) {
mmr32 = (unsigned long *)buf;
*(unsigned long *)mem = *mmr32;
} else
- return EFAULT;
+ err = -EFAULT;
break;
default:
- return EFAULT;
+ err = -EFAULT;
}
} else if ((cpu == 0 && IN_MEM(mem, count, L1_CODE_START, L1_CODE_LENGTH))
#ifdef CONFIG_SMP
@@ -630,7 +632,7 @@ int kgdb_ebin2mem(char *buf, char *mem, int count)
) {
/* access L1 instruction SRAM */
if (dma_memcpy(mem, buf, size) == NULL)
- err = EFAULT;
+ err = -EFAULT;
} else
err = probe_kernel_write(mem, buf, size);
@@ -648,10 +650,12 @@ int kgdb_hex2mem(char *buf, char *mem, int count)
char *tmp_hex;
unsigned short *mmr16;
unsigned long *mmr32;
+ int err;
int cpu = raw_smp_processor_id();
- if (validate_memory_access_address((unsigned long)mem, count))
- return EFAULT;
+ err = validate_memory_access_address((unsigned long)mem, count);
+ if (err)
+ return err;
/*
* We use the upper half of buf as an intermediate buffer for the
@@ -673,17 +677,17 @@ int kgdb_hex2mem(char *buf, char *mem, int count)
mmr16 = (unsigned short *)tmp_raw;
*(unsigned short *)mem = *mmr16;
} else
- return EFAULT;
+ err = -EFAULT;
break;
case 4:
if ((unsigned int)mem % 4 == 0) {
mmr32 = (unsigned long *)tmp_raw;
*(unsigned long *)mem = *mmr32;
} else
- return EFAULT;
+ err = -EFAULT;
break;
default:
- return EFAULT;
+ err = -EFAULT;
}
} else if ((cpu == 0 && IN_MEM(mem, count, L1_CODE_START, L1_CODE_LENGTH))
#ifdef CONFIG_SMP
@@ -692,10 +696,11 @@ int kgdb_hex2mem(char *buf, char *mem, int count)
) {
/* access L1 instruction SRAM */
if (dma_memcpy(mem, tmp_raw, count) == NULL)
- return EFAULT;
+ err = -EFAULT;
} else
- return probe_kernel_write(mem, tmp_raw, count);
- return 0;
+ err = probe_kernel_write(mem, tmp_raw, count);
+
+ return err;
}
int kgdb_validate_break_address(unsigned long addr)
@@ -715,7 +720,7 @@ int kgdb_validate_break_address(unsigned long addr)
if (IN_MEM(addr, BREAK_INSTR_SIZE, L2_START, L2_LENGTH))
return 0;
- return EFAULT;
+ return -EFAULT;
}
int kgdb_arch_set_breakpoint(unsigned long addr, char *saved_instr)
--
1.6.3.1
next prev parent reply other threads:[~2009-06-05 8:25 UTC|newest]
Thread overview: 63+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-06-05 8:04 [PATCH 00/62] Blackfin arch updates for 2.6.31 Mike Frysinger
2009-06-05 8:04 ` [PATCH 01/62] Blackfin: add comment for anomaly 05000171 to init code Mike Frysinger
2009-06-05 8:04 ` [PATCH 02/62] Blackfin: add some help text to the EBIU_AMBCTL settings Mike Frysinger
2009-06-05 8:04 ` [PATCH 03/62] Blackfin: bf527-ezkit: add support for mmc-spi Mike Frysinger
2009-06-05 8:04 ` [PATCH 04/62] Blackfin: Allow bf548 ATAPI to be routed to GPIO Mike Frysinger
2009-06-05 8:04 ` [PATCH 05/62] Blackfin: allow scheduler functions to be placed into L1 Mike Frysinger
2009-06-05 8:04 ` [PATCH 06/62] Blackfin: fix link failure due to CONFIG_EXCEPTION_L1_SCRATCH Mike Frysinger
2009-06-05 8:04 ` [PATCH 07/62] Blackfin: fix data cache flushing when doing icache flushing Mike Frysinger
2009-06-05 8:04 ` [PATCH 08/62] Blackfin: fix bug found by traps test case 21 Mike Frysinger
2009-06-05 8:04 ` [PATCH 09/62] Blackfin: fix parentheses balance and convert some tab/space mixing Mike Frysinger
2009-06-05 8:04 ` [PATCH 10/62] Blackfin: fix warnings with I/O port macros Mike Frysinger
2009-06-05 8:04 ` [PATCH 11/62] Blackfin: merge Philippe's recent ipipe patch Mike Frysinger
2009-06-05 8:04 ` [PATCH 12/62] Blackfin: fix up PATA resource handling in bf537-stamp Mike Frysinger
2009-06-05 8:04 ` [PATCH 13/62] Blackfin: pull updated anomaly lists from toolchain Mike Frysinger
2009-06-05 8:04 ` [PATCH 14/62] Blackfin: do not error if GPIO IRQ is requested already as GPIO Mike Frysinger
2009-06-05 8:04 ` [PATCH 15/62] Blackfin: set bf51x/bf52x to 0.0 rev by default and bf54x to 0.2 Mike Frysinger
2009-06-05 8:04 ` [PATCH 16/62] Blackfin: simplify the do_flush macro Mike Frysinger
2009-06-05 8:04 ` [PATCH 17/62] Blackfin: update defconfigs Mike Frysinger
2009-06-05 8:04 ` [PATCH 18/62] Blackfin: simplify BF561 coreb driver greatly Mike Frysinger
2009-06-05 8:04 ` [PATCH 19/62] Blackfin: fix detection of cached L2 SRAM Mike Frysinger
2009-06-05 8:04 ` [PATCH 20/62] Blackfin: add MDMA defines to make cross-variant coding easier Mike Frysinger
2009-06-05 8:04 ` [PATCH 21/62] Blackfin: fix early L1 relocation crash Mike Frysinger
2009-06-05 8:04 ` [PATCH 22/62] Blackfin: document anomaly 05000234 workaround Mike Frysinger
2009-06-05 8:04 ` [PATCH 23/62] Blackfin: annotate anomaly 05000119 in core DMA code Mike Frysinger
2009-06-05 8:04 ` [PATCH 24/62] Blackfin: punt useless GPIO init call Mike Frysinger
2009-06-05 8:04 ` [PATCH 25/62] Blackfin: work around anomaly 05000287 Mike Frysinger
2009-06-05 8:04 ` [PATCH 26/62] Blackfin: delete unused sys_getpagesize() function Mike Frysinger
2009-06-05 8:04 ` [PATCH 27/62] Blackfin: workaround anomaly 05000227 Mike Frysinger
2009-06-05 8:04 ` [PATCH 28/62] Blackfin: do not append newlines to panic() messages Mike Frysinger
2009-06-05 8:04 ` [PATCH 29/62] Blackfin: detect anomaly 05000274 Mike Frysinger
2009-06-05 8:04 ` [PATCH 30/62] Blackfin: BF518F-EZBRD: handle required portmuxing of async pins Mike Frysinger
2009-06-05 8:04 ` [PATCH 31/62] Blackfin: annotate anomaly 05000120 Mike Frysinger
2009-06-05 8:04 ` [PATCH 32/62] Blackfin: add support for gptimer0 as a tick source Mike Frysinger
2009-06-05 8:04 ` [PATCH 33/62] Blackfin: add workaround for anomaly 05000287 Mike Frysinger
2009-06-05 8:04 ` [PATCH 34/62] Blackfin: make sure MPU CPLB for first 1k is marked as valid Mike Frysinger
2009-06-05 8:04 ` [PATCH 35/62] Blackfin: rename some Blackfin drivers Mike Frysinger
2009-06-05 8:04 ` [PATCH 36/62] Blackfin: work around anomaly 05000220 Mike Frysinger
2009-06-05 8:04 ` [PATCH 37/62] Blackfin: add note about anomaly 05000242 being worked around Mike Frysinger
2009-06-05 8:04 ` [PATCH 38/62] Blackfin: make deferred hardware errors more exact Mike Frysinger
2009-06-05 8:04 ` [PATCH 39/62] Blackfin: make sure stack is accessible before dumping it Mike Frysinger
2009-06-05 8:04 ` [PATCH 40/62] Blackfin: add workaround for anomaly 05000461 Mike Frysinger
2009-06-05 8:04 ` [PATCH 41/62] Blackfin: include system/processor info in dump messages Mike Frysinger
2009-06-05 8:04 ` [PATCH 42/62] Blackfin: update gptimers API Mike Frysinger
2009-06-05 8:04 ` [PATCH 43/62] Blackfin: drop unused reserve_pda() function Mike Frysinger
2009-06-05 8:04 ` [PATCH 44/62] Blackfin: merge sram init functions Mike Frysinger
2009-06-05 8:04 ` [PATCH 45/62] Blackfin: fix handling of initial L1 reservation Mike Frysinger
2009-06-05 8:04 ` [PATCH 46/62] Blackfin: fix command line corruption with DEBUG_DOUBLEFAULT Mike Frysinger
2009-06-05 8:04 ` [PATCH 47/62] Blackfin: override default uClinux MTD addr/size Mike Frysinger
2009-06-05 8:04 ` [PATCH 48/62] Blackfin: bf548-ezkit: add resources for ADXL345/346 Mike Frysinger
2009-06-05 8:04 ` [PATCH 49/62] Blackfin: convert SMP to only use generic time framework Mike Frysinger
2009-06-05 8:04 ` [PATCH 50/62] Blackfin: add SSYNC to set_dma_sg() for descriptor fetching Mike Frysinger
2009-06-05 8:05 ` [PATCH 51/62] Blackfin: check SIC defines rather than variant names Mike Frysinger
2009-06-05 8:05 ` [PATCH 52/62] Blackfin: rename Blackfin relocs according to the toolchain Mike Frysinger
2009-06-05 8:05 ` [PATCH 53/62] Blackfin: document the lsl variants of the L1 allocator Mike Frysinger
2009-06-05 8:05 ` [PATCH 54/62] Blackfin: convert early_printk EVT init to a loop Mike Frysinger
2009-06-05 8:05 ` [PATCH 55/62] Blackfin: add missing access_ok() checks to user functions Mike Frysinger
2009-06-05 8:05 ` [PATCH 56/62] Blackfin: punt duplicated search_exception_table() prototype Mike Frysinger
2009-06-05 8:05 ` [PATCH 57/62] Blackfin: push access_ok() L1 attribute down Mike Frysinger
2009-06-05 8:05 ` Mike Frysinger [this message]
2009-06-05 8:05 ` [PATCH 59/62] Blackfin: fix length checking in kgdb_ebin2mem Mike Frysinger
2009-06-05 8:05 ` [PATCH 60/62] Blackfin: export the last exception cause via debugfs Mike Frysinger
2009-06-05 8:05 ` [PATCH 61/62] Blackfin: fix unused warnings after nommu update Mike Frysinger
2009-06-05 8:05 ` [PATCH 62/62] Blackfin: fix sparseirq/kstat_irqs fallout Mike Frysinger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1244189111-19639-59-git-send-email-vapier@gentoo.org \
--to=vapier@gentoo.org \
--cc=linux-kernel@vger.kernel.org \
--cc=uclinux-dist-devel@blackfin.uclinux.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®