From: Mike Frysinger <vapier@gentoo.org>
To: linux-kernel@vger.kernel.org
Cc: uclinux-dist-devel@blackfin.uclinux.org
Subject: [PATCH 35/62] Blackfin: rename some Blackfin drivers
Date: Fri, 5 Jun 2009 04:04:44 -0400 [thread overview]
Message-ID: <1244189111-19639-36-git-send-email-vapier@gentoo.org> (raw)
In-Reply-To: <1244189111-19639-1-git-send-email-vapier@gentoo.org>
Try to keep the naming conventions consistent, so:
SPI_ADC_BF533 -> BFIN_SPI_ADC
TWI_LCD -> BFIN_TWI_LCD
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
---
arch/blackfin/mach-bf518/boards/ezbrd.c | 10 +++++-----
arch/blackfin/mach-bf527/boards/cm_bf527.c | 10 +++++-----
arch/blackfin/mach-bf527/boards/ezbrd.c | 10 +++++-----
arch/blackfin/mach-bf527/boards/ezkit.c | 10 +++++-----
arch/blackfin/mach-bf533/boards/H8606.c | 4 ++--
arch/blackfin/mach-bf533/boards/cm_bf533.c | 4 ++--
arch/blackfin/mach-bf533/boards/ezkit.c | 4 ++--
arch/blackfin/mach-bf533/boards/stamp.c | 6 +++---
arch/blackfin/mach-bf537/boards/cm_bf537.c | 4 ++--
arch/blackfin/mach-bf537/boards/pnav10.c | 8 ++++----
arch/blackfin/mach-bf537/boards/stamp.c | 10 +++++-----
arch/blackfin/mach-bf537/boards/tcm_bf537.c | 4 ++--
arch/blackfin/mach-bf548/boards/ezkit.c | 2 +-
arch/blackfin/mach-bf561/boards/cm_bf561.c | 4 ++--
14 files changed, 45 insertions(+), 45 deletions(-)
diff --git a/arch/blackfin/mach-bf518/boards/ezbrd.c b/arch/blackfin/mach-bf518/boards/ezbrd.c
index 602dce0..62bba09 100644
--- a/arch/blackfin/mach-bf518/boards/ezbrd.c
+++ b/arch/blackfin/mach-bf518/boards/ezbrd.c
@@ -166,8 +166,8 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
};
#endif
-#if defined(CONFIG_SPI_ADC_BF533) \
- || defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_BFIN_SPI_ADC) \
+ || defined(CONFIG_BFIN_SPI_ADC_MODULE)
/* SPI ADC chip */
static struct bfin5xx_spi_chip spi_adc_chip_info = {
.enable_dma = 1, /* use dma transfer with this chip*/
@@ -253,8 +253,8 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
},
#endif
-#if defined(CONFIG_SPI_ADC_BF533) \
- || defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_BFIN_SPI_ADC) \
+ || defined(CONFIG_BFIN_SPI_ADC_MODULE)
{
.modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
.max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */
@@ -518,7 +518,7 @@ static struct platform_device i2c_bfin_twi_device = {
#endif
static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
-#if defined(CONFIG_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
+#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
{
I2C_BOARD_INFO("pcf8574_lcd", 0x22),
},
diff --git a/arch/blackfin/mach-bf527/boards/cm_bf527.c b/arch/blackfin/mach-bf527/boards/cm_bf527.c
index 48e69ee..6d6f9ef 100644
--- a/arch/blackfin/mach-bf527/boards/cm_bf527.c
+++ b/arch/blackfin/mach-bf527/boards/cm_bf527.c
@@ -463,8 +463,8 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
};
#endif
-#if defined(CONFIG_SPI_ADC_BF533) \
- || defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_BFIN_SPI_ADC) \
+ || defined(CONFIG_BFIN_SPI_ADC_MODULE)
/* SPI ADC chip */
static struct bfin5xx_spi_chip spi_adc_chip_info = {
.enable_dma = 1, /* use dma transfer with this chip*/
@@ -554,8 +554,8 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
},
#endif
-#if defined(CONFIG_SPI_ADC_BF533) \
- || defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_BFIN_SPI_ADC) \
+ || defined(CONFIG_BFIN_SPI_ADC_MODULE)
{
.modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
.max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */
@@ -789,7 +789,7 @@ static struct platform_device i2c_bfin_twi_device = {
#endif
static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
-#if defined(CONFIG_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
+#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
{
I2C_BOARD_INFO("pcf8574_lcd", 0x22),
.type = "pcf8574_lcd",
diff --git a/arch/blackfin/mach-bf527/boards/ezbrd.c b/arch/blackfin/mach-bf527/boards/ezbrd.c
index 7fe480e..1435c5d 100644
--- a/arch/blackfin/mach-bf527/boards/ezbrd.c
+++ b/arch/blackfin/mach-bf527/boards/ezbrd.c
@@ -247,8 +247,8 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
};
#endif
-#if defined(CONFIG_SPI_ADC_BF533) \
- || defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_BFIN_SPI_ADC) \
+ || defined(CONFIG_BFIN_SPI_ADC_MODULE)
/* SPI ADC chip */
static struct bfin5xx_spi_chip spi_adc_chip_info = {
.enable_dma = 1, /* use dma transfer with this chip*/
@@ -354,8 +354,8 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
},
#endif
-#if defined(CONFIG_SPI_ADC_BF533) \
- || defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_BFIN_SPI_ADC) \
+ || defined(CONFIG_BFIN_SPI_ADC_MODULE)
{
.modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
.max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */
@@ -586,7 +586,7 @@ static struct platform_device i2c_bfin_twi_device = {
#endif
static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
-#if defined(CONFIG_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
+#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
{
I2C_BOARD_INFO("pcf8574_lcd", 0x22),
},
diff --git a/arch/blackfin/mach-bf527/boards/ezkit.c b/arch/blackfin/mach-bf527/boards/ezkit.c
index 9ab8d8c..147edd1 100644
--- a/arch/blackfin/mach-bf527/boards/ezkit.c
+++ b/arch/blackfin/mach-bf527/boards/ezkit.c
@@ -485,8 +485,8 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
};
#endif
-#if defined(CONFIG_SPI_ADC_BF533) \
- || defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_BFIN_SPI_ADC) \
+ || defined(CONFIG_BFIN_SPI_ADC_MODULE)
/* SPI ADC chip */
static struct bfin5xx_spi_chip spi_adc_chip_info = {
.enable_dma = 1, /* use dma transfer with this chip*/
@@ -600,8 +600,8 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
},
#endif
-#if defined(CONFIG_SPI_ADC_BF533) \
- || defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_BFIN_SPI_ADC) \
+ || defined(CONFIG_BFIN_SPI_ADC_MODULE)
{
.modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
.max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */
@@ -854,7 +854,7 @@ static struct platform_device i2c_bfin_twi_device = {
#endif
static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
-#if defined(CONFIG_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
+#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
{
I2C_BOARD_INFO("pcf8574_lcd", 0x22),
},
diff --git a/arch/blackfin/mach-bf533/boards/H8606.c b/arch/blackfin/mach-bf533/boards/H8606.c
index 0c66bf4..895f213 100644
--- a/arch/blackfin/mach-bf533/boards/H8606.c
+++ b/arch/blackfin/mach-bf533/boards/H8606.c
@@ -173,7 +173,7 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
};
#endif
-#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE)
/* SPI ADC chip */
static struct bfin5xx_spi_chip spi_adc_chip_info = {
.ctl_reg = 0x1000,
@@ -216,7 +216,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
},
#endif
-#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE)
{
.modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
.max_speed_hz = 4, /* actual baudrate is SCLK/(2xspeed_hz) */
diff --git a/arch/blackfin/mach-bf533/boards/cm_bf533.c b/arch/blackfin/mach-bf533/boards/cm_bf533.c
index e897487..a727e53 100644
--- a/arch/blackfin/mach-bf533/boards/cm_bf533.c
+++ b/arch/blackfin/mach-bf533/boards/cm_bf533.c
@@ -82,7 +82,7 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
#endif
/* SPI ADC chip */
-#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE)
static struct bfin5xx_spi_chip spi_adc_chip_info = {
.enable_dma = 1, /* use dma transfer with this chip*/
.bits_per_word = 16,
@@ -117,7 +117,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
},
#endif
-#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE)
{
.modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
.max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */
diff --git a/arch/blackfin/mach-bf533/boards/ezkit.c b/arch/blackfin/mach-bf533/boards/ezkit.c
index 08cd096..842f1c9 100644
--- a/arch/blackfin/mach-bf533/boards/ezkit.c
+++ b/arch/blackfin/mach-bf533/boards/ezkit.c
@@ -118,7 +118,7 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
};
#endif
-#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE)
/* SPI ADC chip */
static struct bfin5xx_spi_chip spi_adc_chip_info = {
.enable_dma = 1, /* use dma transfer with this chip*/
@@ -154,7 +154,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
},
#endif
-#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE)
{
.modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
.max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */
diff --git a/arch/blackfin/mach-bf533/boards/stamp.c b/arch/blackfin/mach-bf533/boards/stamp.c
index db96f33..e19c565 100644
--- a/arch/blackfin/mach-bf533/boards/stamp.c
+++ b/arch/blackfin/mach-bf533/boards/stamp.c
@@ -192,7 +192,7 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
};
#endif
-#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE)
/* SPI ADC chip */
static struct bfin5xx_spi_chip spi_adc_chip_info = {
.enable_dma = 1, /* use dma transfer with this chip*/
@@ -237,7 +237,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
},
#endif
-#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE)
{
.modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
.max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */
@@ -448,7 +448,7 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
.irq = 39,
},
#endif
-#if defined(CONFIG_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
+#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
{
I2C_BOARD_INFO("pcf8574_lcd", 0x22),
},
diff --git a/arch/blackfin/mach-bf537/boards/cm_bf537.c b/arch/blackfin/mach-bf537/boards/cm_bf537.c
index 41c75b9..4fee196 100644
--- a/arch/blackfin/mach-bf537/boards/cm_bf537.c
+++ b/arch/blackfin/mach-bf537/boards/cm_bf537.c
@@ -86,7 +86,7 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
};
#endif
-#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE)
/* SPI ADC chip */
static struct bfin5xx_spi_chip spi_adc_chip_info = {
.enable_dma = 1, /* use dma transfer with this chip*/
@@ -129,7 +129,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
},
#endif
-#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE)
{
.modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
.max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */
diff --git a/arch/blackfin/mach-bf537/boards/pnav10.c b/arch/blackfin/mach-bf537/boards/pnav10.c
index 4e1de1e..26707ce 100644
--- a/arch/blackfin/mach-bf537/boards/pnav10.c
+++ b/arch/blackfin/mach-bf537/boards/pnav10.c
@@ -265,8 +265,8 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
};
#endif
-#if defined(CONFIG_SPI_ADC_BF533) \
- || defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_BFIN_SPI_ADC) \
+ || defined(CONFIG_BFIN_SPI_ADC_MODULE)
/* SPI ADC chip */
static struct bfin5xx_spi_chip spi_adc_chip_info = {
.enable_dma = 1, /* use dma transfer with this chip*/
@@ -333,8 +333,8 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
},
#endif
-#if defined(CONFIG_SPI_ADC_BF533) \
- || defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_BFIN_SPI_ADC) \
+ || defined(CONFIG_BFIN_SPI_ADC_MODULE)
{
.modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
.max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */
diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c
index 9bd0a80..f56289a 100644
--- a/arch/blackfin/mach-bf537/boards/stamp.c
+++ b/arch/blackfin/mach-bf537/boards/stamp.c
@@ -508,8 +508,8 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
};
#endif
-#if defined(CONFIG_SPI_ADC_BF533) \
- || defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_BFIN_SPI_ADC) \
+ || defined(CONFIG_BFIN_SPI_ADC_MODULE)
/* SPI ADC chip */
static struct bfin5xx_spi_chip spi_adc_chip_info = {
.enable_dma = 1, /* use dma transfer with this chip*/
@@ -695,8 +695,8 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
.mode = SPI_MODE_3,
},
#endif
-#if defined(CONFIG_SPI_ADC_BF533) \
- || defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_BFIN_SPI_ADC) \
+ || defined(CONFIG_BFIN_SPI_ADC_MODULE)
{
.modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
.max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */
@@ -1280,7 +1280,7 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
.irq = IRQ_PF5,
},
#endif
-#if defined(CONFIG_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
+#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
{
I2C_BOARD_INFO("pcf8574_lcd", 0x22),
},
diff --git a/arch/blackfin/mach-bf537/boards/tcm_bf537.c b/arch/blackfin/mach-bf537/boards/tcm_bf537.c
index 53ad10f..2805745 100644
--- a/arch/blackfin/mach-bf537/boards/tcm_bf537.c
+++ b/arch/blackfin/mach-bf537/boards/tcm_bf537.c
@@ -86,7 +86,7 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
};
#endif
-#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE)
/* SPI ADC chip */
static struct bfin5xx_spi_chip spi_adc_chip_info = {
.enable_dma = 1, /* use dma transfer with this chip*/
@@ -129,7 +129,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
},
#endif
-#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE)
{
.modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
.max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */
diff --git a/arch/blackfin/mach-bf548/boards/ezkit.c b/arch/blackfin/mach-bf548/boards/ezkit.c
index 096e661..2780e41 100644
--- a/arch/blackfin/mach-bf548/boards/ezkit.c
+++ b/arch/blackfin/mach-bf548/boards/ezkit.c
@@ -786,7 +786,7 @@ static struct i2c_board_info __initdata bfin_i2c_board_info0[] = {
#if !defined(CONFIG_BF542) /* The BF542 only has 1 TWI */
static struct i2c_board_info __initdata bfin_i2c_board_info1[] = {
-#if defined(CONFIG_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
+#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
{
I2C_BOARD_INFO("pcf8574_lcd", 0x22),
},
diff --git a/arch/blackfin/mach-bf561/boards/cm_bf561.c b/arch/blackfin/mach-bf561/boards/cm_bf561.c
index f623c6b..0dd9685 100644
--- a/arch/blackfin/mach-bf561/boards/cm_bf561.c
+++ b/arch/blackfin/mach-bf561/boards/cm_bf561.c
@@ -83,7 +83,7 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
};
#endif
-#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE)
/* SPI ADC chip */
static struct bfin5xx_spi_chip spi_adc_chip_info = {
.enable_dma = 1, /* use dma transfer with this chip*/
@@ -126,7 +126,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
},
#endif
-#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE)
{
.modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
.max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */
--
1.6.3.1
next prev parent reply other threads:[~2009-06-05 8:18 UTC|newest]
Thread overview: 63+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-06-05 8:04 [PATCH 00/62] Blackfin arch updates for 2.6.31 Mike Frysinger
2009-06-05 8:04 ` [PATCH 01/62] Blackfin: add comment for anomaly 05000171 to init code Mike Frysinger
2009-06-05 8:04 ` [PATCH 02/62] Blackfin: add some help text to the EBIU_AMBCTL settings Mike Frysinger
2009-06-05 8:04 ` [PATCH 03/62] Blackfin: bf527-ezkit: add support for mmc-spi Mike Frysinger
2009-06-05 8:04 ` [PATCH 04/62] Blackfin: Allow bf548 ATAPI to be routed to GPIO Mike Frysinger
2009-06-05 8:04 ` [PATCH 05/62] Blackfin: allow scheduler functions to be placed into L1 Mike Frysinger
2009-06-05 8:04 ` [PATCH 06/62] Blackfin: fix link failure due to CONFIG_EXCEPTION_L1_SCRATCH Mike Frysinger
2009-06-05 8:04 ` [PATCH 07/62] Blackfin: fix data cache flushing when doing icache flushing Mike Frysinger
2009-06-05 8:04 ` [PATCH 08/62] Blackfin: fix bug found by traps test case 21 Mike Frysinger
2009-06-05 8:04 ` [PATCH 09/62] Blackfin: fix parentheses balance and convert some tab/space mixing Mike Frysinger
2009-06-05 8:04 ` [PATCH 10/62] Blackfin: fix warnings with I/O port macros Mike Frysinger
2009-06-05 8:04 ` [PATCH 11/62] Blackfin: merge Philippe's recent ipipe patch Mike Frysinger
2009-06-05 8:04 ` [PATCH 12/62] Blackfin: fix up PATA resource handling in bf537-stamp Mike Frysinger
2009-06-05 8:04 ` [PATCH 13/62] Blackfin: pull updated anomaly lists from toolchain Mike Frysinger
2009-06-05 8:04 ` [PATCH 14/62] Blackfin: do not error if GPIO IRQ is requested already as GPIO Mike Frysinger
2009-06-05 8:04 ` [PATCH 15/62] Blackfin: set bf51x/bf52x to 0.0 rev by default and bf54x to 0.2 Mike Frysinger
2009-06-05 8:04 ` [PATCH 16/62] Blackfin: simplify the do_flush macro Mike Frysinger
2009-06-05 8:04 ` [PATCH 17/62] Blackfin: update defconfigs Mike Frysinger
2009-06-05 8:04 ` [PATCH 18/62] Blackfin: simplify BF561 coreb driver greatly Mike Frysinger
2009-06-05 8:04 ` [PATCH 19/62] Blackfin: fix detection of cached L2 SRAM Mike Frysinger
2009-06-05 8:04 ` [PATCH 20/62] Blackfin: add MDMA defines to make cross-variant coding easier Mike Frysinger
2009-06-05 8:04 ` [PATCH 21/62] Blackfin: fix early L1 relocation crash Mike Frysinger
2009-06-05 8:04 ` [PATCH 22/62] Blackfin: document anomaly 05000234 workaround Mike Frysinger
2009-06-05 8:04 ` [PATCH 23/62] Blackfin: annotate anomaly 05000119 in core DMA code Mike Frysinger
2009-06-05 8:04 ` [PATCH 24/62] Blackfin: punt useless GPIO init call Mike Frysinger
2009-06-05 8:04 ` [PATCH 25/62] Blackfin: work around anomaly 05000287 Mike Frysinger
2009-06-05 8:04 ` [PATCH 26/62] Blackfin: delete unused sys_getpagesize() function Mike Frysinger
2009-06-05 8:04 ` [PATCH 27/62] Blackfin: workaround anomaly 05000227 Mike Frysinger
2009-06-05 8:04 ` [PATCH 28/62] Blackfin: do not append newlines to panic() messages Mike Frysinger
2009-06-05 8:04 ` [PATCH 29/62] Blackfin: detect anomaly 05000274 Mike Frysinger
2009-06-05 8:04 ` [PATCH 30/62] Blackfin: BF518F-EZBRD: handle required portmuxing of async pins Mike Frysinger
2009-06-05 8:04 ` [PATCH 31/62] Blackfin: annotate anomaly 05000120 Mike Frysinger
2009-06-05 8:04 ` [PATCH 32/62] Blackfin: add support for gptimer0 as a tick source Mike Frysinger
2009-06-05 8:04 ` [PATCH 33/62] Blackfin: add workaround for anomaly 05000287 Mike Frysinger
2009-06-05 8:04 ` [PATCH 34/62] Blackfin: make sure MPU CPLB for first 1k is marked as valid Mike Frysinger
2009-06-05 8:04 ` Mike Frysinger [this message]
2009-06-05 8:04 ` [PATCH 36/62] Blackfin: work around anomaly 05000220 Mike Frysinger
2009-06-05 8:04 ` [PATCH 37/62] Blackfin: add note about anomaly 05000242 being worked around Mike Frysinger
2009-06-05 8:04 ` [PATCH 38/62] Blackfin: make deferred hardware errors more exact Mike Frysinger
2009-06-05 8:04 ` [PATCH 39/62] Blackfin: make sure stack is accessible before dumping it Mike Frysinger
2009-06-05 8:04 ` [PATCH 40/62] Blackfin: add workaround for anomaly 05000461 Mike Frysinger
2009-06-05 8:04 ` [PATCH 41/62] Blackfin: include system/processor info in dump messages Mike Frysinger
2009-06-05 8:04 ` [PATCH 42/62] Blackfin: update gptimers API Mike Frysinger
2009-06-05 8:04 ` [PATCH 43/62] Blackfin: drop unused reserve_pda() function Mike Frysinger
2009-06-05 8:04 ` [PATCH 44/62] Blackfin: merge sram init functions Mike Frysinger
2009-06-05 8:04 ` [PATCH 45/62] Blackfin: fix handling of initial L1 reservation Mike Frysinger
2009-06-05 8:04 ` [PATCH 46/62] Blackfin: fix command line corruption with DEBUG_DOUBLEFAULT Mike Frysinger
2009-06-05 8:04 ` [PATCH 47/62] Blackfin: override default uClinux MTD addr/size Mike Frysinger
2009-06-05 8:04 ` [PATCH 48/62] Blackfin: bf548-ezkit: add resources for ADXL345/346 Mike Frysinger
2009-06-05 8:04 ` [PATCH 49/62] Blackfin: convert SMP to only use generic time framework Mike Frysinger
2009-06-05 8:04 ` [PATCH 50/62] Blackfin: add SSYNC to set_dma_sg() for descriptor fetching Mike Frysinger
2009-06-05 8:05 ` [PATCH 51/62] Blackfin: check SIC defines rather than variant names Mike Frysinger
2009-06-05 8:05 ` [PATCH 52/62] Blackfin: rename Blackfin relocs according to the toolchain Mike Frysinger
2009-06-05 8:05 ` [PATCH 53/62] Blackfin: document the lsl variants of the L1 allocator Mike Frysinger
2009-06-05 8:05 ` [PATCH 54/62] Blackfin: convert early_printk EVT init to a loop Mike Frysinger
2009-06-05 8:05 ` [PATCH 55/62] Blackfin: add missing access_ok() checks to user functions Mike Frysinger
2009-06-05 8:05 ` [PATCH 56/62] Blackfin: punt duplicated search_exception_table() prototype Mike Frysinger
2009-06-05 8:05 ` [PATCH 57/62] Blackfin: push access_ok() L1 attribute down Mike Frysinger
2009-06-05 8:05 ` [PATCH 58/62] Blackfin: kgdb: fix up error return values Mike Frysinger
2009-06-05 8:05 ` [PATCH 59/62] Blackfin: fix length checking in kgdb_ebin2mem Mike Frysinger
2009-06-05 8:05 ` [PATCH 60/62] Blackfin: export the last exception cause via debugfs Mike Frysinger
2009-06-05 8:05 ` [PATCH 61/62] Blackfin: fix unused warnings after nommu update Mike Frysinger
2009-06-05 8:05 ` [PATCH 62/62] Blackfin: fix sparseirq/kstat_irqs fallout Mike Frysinger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1244189111-19639-36-git-send-email-vapier@gentoo.org \
--to=vapier@gentoo.org \
--cc=linux-kernel@vger.kernel.org \
--cc=uclinux-dist-devel@blackfin.uclinux.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®