From: Mike Frysinger <vapier@gentoo.org>
To: linux-kernel@vger.kernel.org
Cc: uclinux-dist-devel@blackfin.uclinux.org,
Graf Yang <graf.yang@analog.com>
Subject: [PATCH 10/25] Blackfin: bf526-ezbrd: set SPI flash resources to SST device
Date: Sat, 20 Jun 2009 14:44:33 -0400 [thread overview]
Message-ID: <1245523488-26536-11-git-send-email-vapier@gentoo.org> (raw)
In-Reply-To: <1245523488-26536-1-git-send-email-vapier@gentoo.org>
From: Graf Yang <graf.yang@analog.com>
The BF526-EZBRD has a SST SPI flash on it, not a ST Micro.
Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
---
arch/blackfin/mach-bf527/boards/ezbrd.c | 4 ++--
1 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/blackfin/mach-bf527/boards/ezbrd.c b/arch/blackfin/mach-bf527/boards/ezbrd.c
index 9f9c000..b2f30f0 100644
--- a/arch/blackfin/mach-bf527/boards/ezbrd.c
+++ b/arch/blackfin/mach-bf527/boards/ezbrd.c
@@ -237,10 +237,10 @@ static struct flash_platform_data bfin_spi_flash_data = {
.name = "m25p80",
.parts = bfin_spi_flash_partitions,
.nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
- .type = "m25p16",
+ .type = "sst25wf040",
};
-/* SPI flash chip (m25p64) */
+/* SPI flash chip (sst25wf040) */
static struct bfin5xx_spi_chip spi_flash_chip_info = {
.enable_dma = 0, /* use dma transfer with this chip*/
.bits_per_word = 8,
--
1.6.3.1
next prev parent reply other threads:[~2009-06-20 18:47 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-06-20 18:44 [PATCH 00/25] Blackfin arch updates for 2.6.31 (part 3) Mike Frysinger
2009-06-20 18:44 ` [PATCH 01/25] Blackfin: unify memory region checks between kgdb and traps Mike Frysinger
2009-06-20 18:44 ` [PATCH 02/25] Blackfin: bf518f-ezbrd: update DSA resources Mike Frysinger
2009-06-20 18:44 ` [PATCH 03/25] Blackfin: bf533-ezkit: add resources for FISP devices Mike Frysinger
2009-06-20 18:44 ` [PATCH 04/25] Blackfin: update anomaly lists Mike Frysinger
2009-06-20 18:44 ` [PATCH 05/25] Blackfin: redo handling of bad irqs Mike Frysinger
2009-06-20 18:44 ` [PATCH 06/25] Blackfin: only build show_interrupts() when procfs is enabled Mike Frysinger
2009-06-20 18:44 ` [PATCH 07/25] Blackfin: simplify irq stack overflow checking Mike Frysinger
2009-06-20 18:44 ` [PATCH 08/25] Blackfin: abstract irq14 lowering in do_irq Mike Frysinger
2009-06-20 18:44 ` [PATCH 09/25] Blackfin: fix accidental reset in some boot modes Mike Frysinger
2009-06-20 18:44 ` Mike Frysinger [this message]
2009-06-20 18:44 ` [PATCH 11/25] Blackfin: allow people to select BF51x-0.1 silicon rev Mike Frysinger
2009-06-20 18:44 ` [PATCH 12/25] Blackfin: convert interrupt pipeline to irqflags Mike Frysinger
2009-06-20 18:44 ` [PATCH 13/25] Blackfin: allow CONFIG_TICKSOURCE_GPTMR0 with interrupt pipeline Mike Frysinger
2009-06-20 18:44 ` [PATCH 14/25] Blackfin: remove obsolete mcount support from I-pipe code Mike Frysinger
2009-06-20 18:44 ` [PATCH 15/25] Blackfin: update I-pipe patch level Mike Frysinger
2009-06-20 18:44 ` [PATCH 16/25] Blackfin: decouple unrelated cache settings to get exact behavior Mike Frysinger
2009-06-20 18:44 ` [PATCH 17/25] Blackfin: update defconfigs Mike Frysinger
2009-06-20 18:44 ` [PATCH 18/25] Blackfin: stick the CPU name into boot image name Mike Frysinger
2009-06-20 18:44 ` [PATCH 19/25] Blackfin: unify memory map headers Mike Frysinger
2009-06-20 18:44 ` [PATCH 20/25] Blackfin: fix typo in TRAS define in mem_init.h header Mike Frysinger
2009-06-20 18:44 ` [PATCH 21/25] Blackfin: bf526-ezbrd: handle different SDRAM chips Mike Frysinger
2009-06-20 18:44 ` [PATCH 22/25] Blackfin: drop unused ISP1760 port1_disable from board resources Mike Frysinger
2009-06-20 18:44 ` [PATCH 23/25] Blackfin: fix GPTMR0_CLOCKSOURCE dependency on BFIN_GPTIMERS Mike Frysinger
2009-06-20 18:44 ` [PATCH 24/25] Blackfin: fix early crash when booting on wrong cpu Mike Frysinger
2009-06-20 18:44 ` [PATCH 25/25] Blackfin: drop BF535-specific text for exception 0x2A (unaligned instruction) Mike Frysinger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1245523488-26536-11-git-send-email-vapier@gentoo.org \
--to=vapier@gentoo.org \
--cc=graf.yang@analog.com \
--cc=linux-kernel@vger.kernel.org \
--cc=uclinux-dist-devel@blackfin.uclinux.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®